The FS2004 (FS9) Forum
20979 topics in this forum
-
HiI have tried to use the latest nhancer and for some reason Nhancer wont open at start up. Any help appreciated.Using nvidia latest driver for my 8800gtx and running vista home premium sp2Btw, I have tried using search but don't seem to be able to get any results. I'm sure there are some posts on this but i'm not finding them :( Many thanks
-
Hello, i´m the first time here in this forum. I wanted to ask if there exist somewhere the retropaintings for All Nippon Airways(727 and Lockheed Tristar) and JAL(727) for mid 60-mid till mid 70´s.
-
Since i have installed Win 7 I can not get AI traffic to park in their designated positions including my own new Hughes Airwest traffic. I have installed then clean reinstall then another clean reinstall after the first did not work.What the frak am I doing wrong? Also with all the AI sliders Max'd (traffic and dynamic scenery) I do not get alot of traffic except for ASA at SEATAC, all other airports very little traffic and no airline parks where they should. Thier are no dup AFCADSand this was not a problem until win7. Both WOAI and PAI workrd good under the dreaded WinXP Home Ed. Has anyone suffered the same? If so how did u fix?Thanks.....
-
- 5 replies
- 1.7k views
-
-
Can anyone please tell me how to transcribe panel layout information between a saved flight file (.flt) and an aircraft's Panel.cfg file?For instance, in a .flt file, a panel's position in the cockpit may be indicated as follows:ScreenUniCoords= 4000, 2000, 1250, 1450In the panel.cfg file the format (example not corresponding to the above)is:window_Pos= 0.450, 0.230window_Size= 0.225, 0.150Most times, I can use "Panel Layout Saver" to do this automatically, but for certain payware a/c (e.g. PMDG) it doesn't work, the software reporting "Could not find the aircraft's folder" - even though it's there in the FS9/Aircraft folder as normal. Hence, I would really like to know h…
-
- 3 replies
- 2.4k views
-
-
Hi. I´m trying out the POSKY triple seven, but have not yet been able to "activate" the VC... Pardon my ignorance, but can anyone tell me how to?I´ve downloaded the VC and glass panel textures and all, but the VC does not appear.And secondly, is there a proper FMC available?Any help appreciated./Johan
-
- 9 replies
- 3.5k views
-
-
Quick question, I want to remove the enb series bloom plug in, But I cannot remember which two files I need to remove out of my fs9 folder? I don't want to remove the wrong stuff. Thnx in advance
-
- 0 replies
- 1.2k views
-
-
I'm tring to fly the CommuteAir Dash-8 Q200. When i load the plane it bounces. I have tried to change the contact_points and it still does it. Also when taxing to and from gate it bounces. Any fix to this problem???
-
Everyone who uses AS6 knows that winds are pretty extreme and not very realistic. Until now, I've always read to use FSUIPC to smooth out the winds some. For reasons I won't go into here, I don't want to give Pete any money just to have this function. Is there anything else out there that will smooth winds generated by AS6?
-
- 15 replies
- 3.8k views
-
-
After reading this announcement recently on AVSIM - I decided to purchase the USA/Canada package to see how the new night textures looked."Ruud Faber developer of FScene replacement ground textures has begun to release a series of updated textures for FScene4X. The first update covering the regions of USA & Canada is now available as a free download. Users of FScene TotalPack are invited to install this update as well . More updates may be expected in the next weeks. . Registered users may download the update for free at the FsScene Hompage."I could not locate any such "UPDATE" link and I was concerned the installer package, which was dated FEB 2009 did not have the n…
-
- 0 replies
- 1k views
-
-
Does anyone know a fix for the occasional problem of AI aircraft landing short of the runway? I just watched a British Airways 737 do a perfect water landing about 5000 feet short of the LGTS runway and then, after being handed over to ground, taxi across the water to the gate! :( I have noticed it with the FlyTampa KSEA occasionally as well.
-
- 21 replies
- 9.3k views
-
-
Airborne in 8,300ft at AUW of 335,000lbs in a Super VC10 take off from SPZO!!!! Not bad at all!!!vololiberista
-
- 5 replies
- 1.5k views
-
-
Hi.. Since I´m having...difficulties...to say the least with the way POSKYforum-staff are treating their members I´ll give it a try here, if there´s a handy modeler around..I´m wondering which parameter in the [LIGHTS] section of aircraft.cfg controls the following light-reflections:I´ve tried to fiddle around and been able to change the outer LE-reflections, but this inboard part I can´t seem to change./Johan
-
- 0 replies
- 1.1k views
-
-
Can you engage CMD or CWS on climbout?If so, please tell me how you did it cos mine simply refuses.And yes, I have posted over there but the hints Steve and "the team" have given havent yet done the trick.
-
- 12 replies
- 3.5k views
-
-
Hi, I didn't have this problem until recently, I updated my graphics card driver from 10.7 to 10.8 and suddenly the AA isn't working... I have both FSX and FS9, but FSX seems to be fine... I can't really fly now because the ground is very blurry...Please help.Immanuel
-
- 3 replies
- 1.2k views
-
-
I am looking for an SCEL escenary with correct NAVAIDS in my charts Lo Castro(UE) NDB it's located D 4.5 IUEL but in all scenary founds it's located D 6.5 this take to a problem when intend flight ILS Rwy 17Lbecause in holding and descend you must not flight over 8.5, if you locate UE at 4.5 no problem but 2 miles less like appear in all scenary it's a big trouble.Thanks if somebody have an explanation perhaps I made a mistake or confused because in every SCEL escenary I saw the same but Jeppesen Charts locates UE at 4.5 from IUEL not 6.5.
-
- 4 replies
- 1.5k views
-
-
Hi,Excuse if this is wrong board please advise. I recently installed KSNA scenery, but the install went wrong somewhere.The Aircraft agl is 4' submerged and airport has many potholes ect?How do I completely uninstall the scenery of KSNA and reboot to leave the default KSNA ?Ive deleted manually all Scenery and Text from relavant folders Addon included? Still full scenery is evident?Reply when time permits,Berne AFA3564
-
- 6 replies
- 1.3k views
-
-
Hi all,for a long time, it has been my dream to establish a working B767-400/ER simulation in FS9. There are currently 3 addons available that would be the perfect mix put together: The Level-D 767, the PSS 777 and the freeware Posky 764 model. Ideally, this model would be used with the base cockpit of the 777 (MCP from the 767 due to aesthetics) and the flight dynamics from the Level-D aircraft. Would a combination like this be feasbile and has anyone ever attempted to piece together a such airplane? I'm looking forward to hearing from you.
-
- 1 reply
- 1.6k views
-
-
Hi all,why does my Wilco CRJ cause my FS to crash? Crash, in this regards, means the FS just shuts down at some point, without ANY error notification. I am using addon liveries from the database which have worked before it started to crash. Not sure what to do about this, so I appreciate any help or input. Thanks a lot.
-
- 7 replies
- 1.9k views
-
-
I've gone as far to change up the drivers for my GTX 285, made a fresh install of FS9 and an still having the same problem. This is after I had a hard drive crash and now am trying to reinstall all the sceneries I've purchased from them. Everything comes up right in the addon manager and when I click the buy or reinstall option I get this "please put flight sim in windowed mode (alt+enter) and try again"....I've contacted FSDream team and they've tried to help but I guess I'm still doing something wrong. Any advice would be appreciated because I have a lot of money wasted as of now......
-
- 6 replies
- 1.2k views
-
-
Shortly after the system here was hacked, I had a system meltdown of my own. I had everything backed up, unfortunately, it turns out my backup was corrupt, also. (Thanks, Norton) Slowly I've been retrieving some of the items I lost. There was a flightplan package for Zantop airlines that I have been unable to find. I believe it originated from RetroAI and they had it posted here, but it doesn't seem to have made it back after the hacking here. I've searched online extensively, with no success. I'm wondering if someone can direct to a source for this, or if you have it would you be willing to email it to me. I appreciate any help or suggestions,Thanks in advance,Mat…
-
- 2 replies
- 1.1k views
-
-
I am just starting to look into Airport enhancment service and am contemplating getting some credits to add some airports, I am going to try it with the freeware KBOS that it supports, but before purchasing, I was wondering If it adds a lot to the experience or is it more a novelty thing that wears off after a little while?Thanks
-
- 6 replies
- 1.7k views
-
-
Hello,I have a very strange problem. Everythime I start FS 9 I have to reset my key assignments. Something is causing them to be deleted evertime I close or start the program. Does anyone have any ideas as to what might be causing this problem?Thank you,R Jones
-
- 4 replies
- 2k views
-
-
Hi All, I found a very good freeware Md-80! The publisher is POSKY. I have never of POSKY having an MD-80 before, but it seems that they do. It's very good, it has awesome MD-80 sound (it doesn't use the default 737 or Lear 45 sounds) . it has a photoreal panel, VC, and it comes in two liveries- AA and Japan Airline System. The panel isn't that good, but if you do a merge with another MD-80 or 717 panel it looks awesome! Check it out, Its worth it! Here is the direct download link:POSKY MD-80/88
-
- 2 replies
- 5.9k views
-
-
Hey!My friend gave me a program called EZ scenery.It was in a rar file when he sent it me.I opened it and merely installed it but then i realised i could only add objects in seatlle.Then i go on registration,and it asks me for a serial.I dont tend to spend money on Flight simulator since i may lose my interest in flight sim sometime and maybe un install it.May i please kindly ask,if anyone has a serial key,to just give me one.I searched the web and cant find anything.Please
-
- 3 replies
- 2k views
-
-
Hi,I wondered if anyone has experienced the above problem and found a solution to it? I run FS9 in full screen mode (windowed mode for some reason doesn't agree with my set-up) and when I press ALT to access the menu and go to Modules, Squawkbox option is not there. Sometimes when I restart FS it appears again in the menu but recently I can't get it at all despite reinstalling Squawkbox.I tried the Squawkbox forum but after being asked 1001 increasingly superfluous questions culminating in things like "What colour socks are you wearing when the problem occurs" and "have you tried growing a moustache to see if that resolves it?" I concluded that nobody really knew the answ…
-
- 9 replies
- 1.4k views
-