The FS2004 (FS9) Forum

Does anyone have the configuration to add the 3D lights to the Posky A330-300v2?

Hello All, I am trying to get my throttle working using the fsuipc axis assignment. This is giving me a huge headache trying to get it to work. This is what I do,I go to the axis assignmet tab under fsuipcClick scan and move lever number oneGo to the the right and selec it as "throttle 1 set"click ok and nothing worksAm I doing something wrong in my process. I had it set up nicely and now cant remember at all How i did it without any issues. ThnaksP.S Im using a saitek throttle if it mattersThanks again

Ladies and gentlemen!As you may have noticed, the brilliant Mega Airport Munich by Aerosoft/GAP had some memory problems.Now update 1.02 is out (~190 MB). It is meant to correct that problem, e.g. via replacing some textures.Change log:- performance update - textures will load faster now and won't use as much RAM as before- now you can see the airport earlier when at the approach- some small buildings have been addedSo, if you're interested, go to Aerosoft's Updates section, download and install it.http://aerosoft-shop...php?language=enHappy landings! :(

There's a new article in theOct\Nov issue of Computer pilot called Flight Simulator 2004:Life In The Old Bird.This is a very good article to read and shows that FS2004 is not dead and still going strong.I just reinstalled my FS2004 and added all my sceneries free and payware and on my system is running fine.Check out the article and see what you think. JeffG

To users of FSCommander 8 program - In developing a flight plan, after departure and arrival airports, having selected on the vertical left hand columns an App (Approach) for a specified runway (approach which is outlined and shown on the map) how do I get this approach transferred into the flight plan?Is this possible? Have searched through the extensive .pdf manual and through the forum with no success.Will much appreciate any information on this.Regards,

Hi all.I wonder if there´s a way to get the winglets (inboard side) illuminated on the POSKY birds?And secondly: If there´s a way to get the cabin illumination and Logo illumination brighter?(No, I´m not taking it to the up-tight POSKY forum, since I´ve been treated like rubbish there)¨Any help appreciated from helpful AVSIM!!!/Johan

Recently got a new computer with Windows 7 and did a clean install of FS9. Then I moved my FS from the old computer's drive into my new one. There were a few quirks and glitches I had to iron out, and I have got it almost running as before except for one minor glitch....when flying the default 737-400 the aircraft uses fuel from the right tank at a much faster rate than from the left. Does anyone know the setting that may have been altered to cause this? tia.

Hi all, this question should have been asked in the Leonardo Maddog80 forum, but despite my ownership of a duly licensed and registered copy of the Maddog80 standard package, and my efforts to try and enrol in the discussion forum, the confirmation email for that registration was never sent, meaning I am effectively blocked from asking any questions in that forum.Cutting to the chase, I would like to have my copy op the MD80 load with the engines running, so that I can postpone learning the startup process till such time as the very cryptic user's manuals begin to make sense to me. On page 34 of the users manual, the Maddog Control Panel includes selectable options for l…

Please help.I have spent a long time trying to install scenery; have looked in lots of forums and done searches but not getting anywhereHave unzipped approp to addon scenery folder but problem occurs when try and activatre it with fs2004.When I press "add scenery" it opens up correctly and I locate the right file.The online tutorials state that I click on the file ande it is then added.When I do this however, it just opens the file and wants to keep opening the file structure until there is nothing to open and an empty box without actuually adding the scenery.Am i being stupid and missng something. It just does not want to work properly.many thanks - andy

I'm hopefully getting a new computer soon. The operating system will be Windows7, and I'm staying with FS2004.Ive read numerous threads about FS9 and FSX need to be added to a different location in windows7 than in XP.Is there a defining thread or example on how to install FS9 onto a windows7 system. Do you need a separate hard drive? excuse the basic computer language and hope you understand what I mean Steve

Hi AllJust wondered what the best AI traffic program was out there for FS2004?I've only ever used freeware offerings - is it worth spending the money and paying for an AI traffic program?I like my simming to be realistic, so don't mind spending a bit of money in this area.Appreciate your helpMartin

I have just noticed that Justflight has a sale on some of its FS2004 products. These products are all priced €12,95 for the coming two weeks or so, so get them while they're hot. I used the sale to finally get the PSS 777. Honestly, I simply refused to pay almost €40 for such an old release, but now that it's gone done roughly 65% in price, I thought "what the heck". Some other aircraft that are on sale are the PSS Dash-8, PSS Airbus A320 and Constellation and some other products.

Hi,it is a maybe already resolved question but I cannot find out any response. I would like to run FS9 menu without pausing the simulator, as in FSX. When you press ALT button and navigate the menu in FSX you continue to fly, in FS9 no. Is there a tweak? Let's say, some option or FS9.cfg edit?Thanks, bye.

I installed the wonderful KBOS V2 scenery and worked beautifully along with AES.I recently installed V3 after but it didn't work too well so i switched back to V2.After switching back this is the issue I have.My airplane works fine as it is on the tarmac. Even arriving aircraft work fine. The AI that load on start up are below the tarmac.Would be great if someone could help me out. Thanks!

I don't know if this has been mentioned here, but a freeware L-39C Albatross has been under beta for FS9/FSX. I dl'd the beta and it looks pretty good so far. Take a look here:http://speed99.webhosting.klfree.net/class/witex/en.htmlRegards,John

Hi all:I noticed after installing REX for FS9 that the overcast cloud texture color had a bluish tint to it, not grey as what I was observing out my window. Installing Environment Indigo 1.5 Final rendered a grey overcast texture color. Just wondering what texture file(s) control the overcast color? I submitted this question on the REX forum but have not received an answer. Thought I'd post it here for in hopes that someone might know the answer.Thx

I need this model for several AI traffic packs, but I'm using Windows 7 and every attempt at using the PAI installer is met with errors. I really don't anticipate using the installer for any other purpose than to decode their models. Is there any chance that anyone could point me to a download location where I could get the model without having to worry about the installer, or would someone be kind enough to upload it for me?Thanks

I had to reinstall due to some corrupt files which were proven very difficult to locate. So what I did was copy the FS9 full directory to a different hard drive, and gave it a different name. Then I uninstalled all add and FS9. Then I did a brand new install using the original discs. I went to the regedit/local machine/Software/Microsoft yo see if there was any entry related to Microsoft FS9 left, and it was not. Then I did a brand new install using the original discs, when I started up, I got an error mesaage stating that a specific aircraft was not found. That aircraft was the default aircraft that I had in my previous install. So there is still some configurations left…

During the last week I have tried on multiple occasions to install Shez's software but haven't had any luck at all. After installing as per the readme texts all I get when firing up FS9 is a window informing me that it's 'Loading Scenery Objects.....' it get's to 1% on the bar graph then the sim freezes up and then I have to use the windows task manager to get out of the sim. Does anybody have a step by step approach you used to install this airport, if you do I would appreciate it very much. Thanks in advance. Tom Helwick, Livingston, Montana

I recently had a problem with my system resulting in a complete format and re-install of Win XP. As I was having problems with micro-stutters in FS9 I decided to do a fresh install of that also, trying something a bit different. Before the system crash FS9 lived on a dedicated 76 gb Raptor HDD but it was almost full. I had heard of others having good results by putting all their addon scenery on a seperate HDD so I decided to give that a go. I have FS9 on a dedicated 160 gb HDD and I have addon scenery on the 76 gb Raptor HDD. So far it's not working out. I have only added a few sceneries to the seperate addon scenery directory on the Raptor and when I'm flying around tho…

I recently downloaded scenery for HAAB ( Addis Ababa ) installed it and it worked perfectly. The installation instructions stated that I would need some files from scenery libraries. I already had EZ Object Library and RW12 installed and as mentioned the scenery worked perfectly. I have installed more scenery after that and suddenly all I have left of HAAB is runways, taxiways and parking areas with a few lamp posts. All of the buildings, jetways etc have dissappeared. I tried reinstalling the scenery but the same thing happens. I have a feeling I have installed some other scenery which is conflicting with HAAB. Any help i can get would be really appreciated as the HAAB s…

I recently tried fsmetar and feel mostly positive about it. However I noticed a rather basic issue. When 10sm visibility is reported at an aerodrome it means visibility is good, especially coupled with CLR. However fsmetar sets the visibility to an actual 10 miles. This is misinterpretation. Does this happen to everyone?

Good morning everyone, I have spent my entire Flight Simualor life flying within the confines of Europe. Having flown anywhere from The Bay of Biscay to The Urals (with the odd foray to Dubai), I thought I would try a flight in The States/Canada. I completed a really nice flight from San Diego (KSAN) to Vancouver (CYVR), in my Wilco Airbus. I had forgotten how stunning the scenery is over there. A really nice experiance. I noticed however that on the Sids and Stars charts for both airports there was no mention of any Transitional Altitude. So my question (which hopefully is an easy one) is, what is proceedure for Transitional Altitudes over there ? There obviously must be…

I´ve just bought 737NG and FS2004 (A Century of Flight) and I can´t install it in any way. Please any help???Thanks in advance!

Hi there,I'm new in this forum, just got my KLGB(Long Beach Airport) and after installation I did notice some missing textures, did someone here got the same problem? the textures are around the rwy 30, and if you are in short final for the same rwy, look to the right and there are also some missing textures to, maybe trees or buildings i'm not sure.Looking forward for someone with the same problem!! and maybe the solution!best regardsCub51