Crash To Desktop (CTD) Forum

On another thread, http://forum.avsim.net/topic/444488-need-cheering-up-los-angeles-did-the-trick/?p=3012008#entry3012008, a poster called MFD86 suggested that my problems with OOMS and GA flying over ORBX England might be prevented by disabling any ORBX airfields in my scenery list. I'd set up FSX the way I'd wanted it after 6 months of purchases and tweaks, it upset me to find my new A2A Cherokee hitting OOMS or OOM warnings just flying 30 mins from one ORBX field to another. So I've been testing with the FSUIPC VAS monitor and I thought I'd share my results. Free VAS goes up and down I found, and there are certain things which were very strange! For the test …

Probably a "local" problem here, but interesting. If I am running P3D and go to the toolbar and click on World / Scenery Library ... then make ANY change in the library, (even unclicking a scenery and reclicking it) ... when i exit the scenery library and the program reloads, it hangs up at 69% just when the autogen starts being added in. It is not a variable, I can make this happen every time I change the scenery library. I let it sit there for 3 hours one day ... it is hung up, not just slow. I don't think it is a P3D problem ... I'm betting something is screwy with my setup ... anyone got an idea?

I occasionally have a CTD but usually (thank goodness) they are rare enough, or can be attributed to something dumb that I have done and can be un-done, that I haven't paid too much attention to them.. In the past 2 days I have had 2 CTD's in P3D v2.2. One occurred in flight with the Airbus X while switching views, and the other with the Duke v2 sitting at KDEN ( FlightBeam version), with the aircraft running at idle and no movement other than AI traffic. I have EXCA and Ultimate Traffic 2 running, and am running Windows 8.1 / 64 bit. I have several virus scanners that i thought were turned off from scanning. Back in February of 2013 I had some CTD's and dow…

I get this chime from FSUIPC which I think is warning me that I'm close to OOM. It usually happened on approach and landing, but sometimes can happen after departure. I have an I7 with 8 gigs of ram. I have FSX with WOAI, RC (Radar Contact), UTX, FSUIPC, and no addon planes. Sometimes FSX crashes saying it ran out of memory, and other times it doesn't. This is really annoying me though. So is there anything I can do to make this not happen anymore? Or is there any tweak I can do? Thanks very much and I sure hope I can get this solved.

Hello can you please help me.I'm experiencing some weird textures loading when I switch views from external to Virtual Cockpit and ground textures flickering causing my FSX to CTD with OOM problem.I upgraded my Graphics card from GTX 660Ti to EVGA GeForce GTX 780 3GB SC w/ EVGA ACX Cooler. I'm using DX9 and below are my Pc Specs: Intel Core i7 3770K OC @ 4.5Ghz Nvidia Geforce EVGA GTX 780 3GB 16GB Ram, 2TB HD 1TB Ext HD Kind Regards Lloyd

Hi, I've been getting alot of g2d.dll crashes lately. This has happened at different airports, on ground, in air etc. this report is in swedish but I hope you can understand anyways: Händelsenamn: APPCRASH Programnamn: fsx.exe Programversion: 10.0.61472.0 Programtidsstämpel: 475e17d3 Namn på felmodul: g2d.dll Modulens version: 10.0.61472.0 Tidsstämpel för felmodul: 475e180c Undantagskod: c0000005 Undantagsförskjutning: 0005d454 OS-version: 6.1.7601.2.1.0.768.3 Språkvariant-ID: 1053 Extra information om problemet LCID: 1053 thankful for any help

Hi, I have just bought a new Dell inspiron 15r (unfortunately with defaulted windows 8) and have installed FSX on it, but notice it keeps crashing whenever I start, load, save or end a flight when I've crashed the plane. I have installed the 2sp's for FSX but that hasn't fixed the problem. I have also updated win 8 to 8.1 but that still hasn't fixed the problem. I only use Just Flight 742s, 743s, 332s, 333s, 342s, 343s, and md80s and have no freeware planes taken out. All of the settings except graphics and aircraft quality are at absolute minimal! How do I fix this? (BTW I also have an unused Win 7 Dell XPS Gaming Laptop that's currently at the repair shop 'cause…

Hi guys : I have fatal error problem when start flight in fsx im using windows 7 processor : Core i5-2400 CPU @ 3.10 GHZ RAM : 8GB System Type : 64 bit Graphic card: AMD Readon HD 6300 M :- 2GB Event Log:- Faulting application name: fsx.exe, version: 10.0.61472.0, time stamp: 0x475e17d3 Faulting module name: unknown, version: 0.0.0.0, time stamp: 0x00000000 Exception code: 0xc0000005 Fault offset: 0x39400008 Faulting process id: 0x9f0 Faulting application start time: 0x01cf84cd5cc46ef1 Faulting application path: D:\FSX\fsx.exe Faulting module path: unknown Report Id: 191d9a2f-f0c9-11e3-b62e-025d3b663562 Please help me All thanks

Version=1 EventType=AppHangB1 EventTime=130468496506065577 ReportType=3 Consent=1 UploadTime=130468496557461983 ReportIdentifier=423657b7-f05b-11e3-826b-240a64c67e2c IntegratorReportIdentifier=423657b8-f05b-11e3-826b-240a64c67e2c WOW64=1 NsAppName=fsx.exe Response.BucketId=be7a68a50eb37c89634194d0fe4049e4 Response.BucketTable=5 Response.LegacyBucketId=-325984899 Response.type=4 Sig[0].Name=Application Name Sig[0].Value=fsx.exe Sig[1].Name=Application Version Sig[1].Value=10.0.61472.0 Sig[2].Name=Application Timestamp Sig[2].Value=475e17d3 Sig[3].Name=Hang Signature Sig[3].Value=f669 Sig[4].Name=Hang Type Sig[4].Value=134217728 DynamicSig[1].Name=OS…

Hi guys, I have this problem and I hope someone could help me. FSX crashes to desktop any time I'm flying a route (a generic fatal error appears) and it crashes only DURING cruise, NOT when taxiing, taking off, landing, neither when I'm climbing or descending... in short NOT when I have the control of the plane, BUT when the plane goes simply over its route (with ap of course). There are NO gauges or windows opened, nor I pass and click from a knob or a windows to another too quickly. Framerate is stable, and it seems there are not memory issues. And if i reload the save flight, after some minutes it crashes again. It happened with different liner from different addon, b…

Oh I thought my problems were behind me! My system is fast and robust, i7 quad core, overclocked, with a GTX 760, I've been running ORBX England at 30 fps locked with any plane and with the A2A 172 and Cherokee it has not dipped at all. Recently I've been hearing the warning bells on long flights between UK2000 airports, one of them being an Xtreme, where I drop to 22 fps. But now every flight longer than 15 mins ends in a CTD and OOM. The ASN weather is simply fair weather, traffic is light in the area.... this never happened before. I can't think what might cause a change and I dont know what to do. Sliders are set 3/4 just as they always have been. Disturbingly,…

I thought my PC problems were gone today but the darn PC booted again today with a black screen (after the windows logo). So I let it sit for a while, turned it off, and rebooted. This time I got a BSOD (from bootup) with code 116 and nvlddmkm.sys as the file erroring.... From my research this appears to be GPU related but could be anything. I've done no changes to my video card, no driver updates lately etc.... The card itself is clean, and I've reseated it recently and all connections are secure. This is all from a fresh install of Windows using my old SSD (new one is for FSX). I am using a second monitor but I unplugged it and am writing this message…

is there any fix for this issue. I have a couple of tweaks added to fsx already like UIAutomationCore.

I previously remedied constant crashes by deleting my fsx.cfg file and allowing the program to rebuild it. After a week or so of bliss, I have now had 2 CTD's in the cruise phase on an original flight and a repeat attempt to fly from Ft. Myers to Boston. Both times it crashed at the same point of the flight, and both times, AppCrashView showed the following modules as the last to load: LoadedModule[205]=C:\Windows\system32\msadp32.acm LoadedModule[206]=C:\Windows\assembly\NativeImages_v2.0.50727_32\System.Drawing\5c24d3b0041ebf4f48a93615b9fa3de9\System.Drawing.ni.dll LoadedModule[207]=C:\Windows\assembly\NativeImages_v2.0.50727_32\System.Configuration\5b6ddf93412…

Hello everyone, FSX has been working fine and then out of the blue it starts crashing. Version=1 EventType=BEX EventTime=130465764247603895 ReportType=2 Consent=1 UploadTime=130465764251807441 ReportIdentifier=1aa95ed3-eddf-11e3-be98-a0d3c155b487 IntegratorReportIdentifier=1aa95ed2-eddf-11e3-be98-a0d3c155b487 WOW64=1 NsAppName=fsx.exe Response.BucketId=983d897b231f8e3afcf48f3e835adb4e Response.BucketTable=5 Response.LegacyBucketId=81618548289 Response.type=4 Sig[0].Name=Application Name Sig[0].Value=fsx.exe Sig[1].Name=Application Version Sig[1].Value=10.0.61637.0 Sig[2].Name=Application Timestamp Sig[2].Value=46fadb14 Sig[3].Name=Fault Module Name Sig[3].Value=St…

Hi, I am a long time user of MSFS and have bought a new Dell inspiron 15r with Windows 8 on it and have installed FSX on it. After finding out it keeps on crashing, I brought down the settings on everything except Graphics and Aircraft Quality but that didn't work. I tried uninstalling all freeware aircraft I had on FSX and sticking with all my payware planes but that didn't work. I installed the two Service Packs for FSX AND Tried updating to Windows 8.1 but even that didn't work. I love FSX but now it's becoming really frustrating :angry: as it crashes whenever I save, load, start, end or accidentally crash into terrain. I have tried converting fsx.cfg into Fsx.orig…

Hi guys, Any ideas how to sort this mess ?

Hi, Recently I have experienced problems with FSX and results in an appcrash and saying 'Microsoft Flight Simulator has encountered a problem' then shutting down FSX. I have tried a reinstall of FSX and still the problem persists. It often occurs when I click on the FSX map and then crashes when I close that to return to the flight. I have also followed the CTD PDF but none of the suggestions appear to have worked. I have copied in below the AppCrashView report to see if anything obvious can be spotted as being the problem. I should say I have Windows 8.1: Version=1 EventType=APPCRASH EventTime=130460825630093842 ReportType=2 Consent=1 UploadTime=13046…

Hi guy am having a problem where am getting a error saying Your computer has run out of memory please restart fsx any Help would be great thanks Gregory !!

Bonjour à tous, Suite à des plantages à répétition de FSX et après examen de l'observateur des événements Windows 7 64 bit (problème systématique d'erreur G3D.DLL), j'ai complètement désinstallé mon FSX pour le réinstaller de manière propre. J'ai installé uiautomationcore.dll adapté à mon OS Windows 7 64 bits et une version récente de FSUIPC trouvée sur ce site. BILAN : encore des plantages qui proviendraient d'une erreur "G3D. DLL". Je me suis donc entêté à fouiller la toile et il se pourrait que le problème vienne d'une mise à jour pilote de ma carte graphique. Ma carte est une NVIDIA GeForce GTX 660 Ti et le dernier pilote graphique est une version 335.23. J'ai lu …

Hi everybody ! :rolleyes: I've some trouble after re installing FSX with systematic crash to desktop when i use to fly. :mad: Actually, i 've created a new FSX.cfg file without any tweaks and no add ons. Always the same problem mainly when i close FSX. Windows 7 64 bit reports a G3D.DLL error each time. I downloaded FSUIPC4.DLL version 4.934 here but nothing's is better... Appreciate your help, thank you and sorry for my "frenchy" English ! :unsure: After installing AppCrashView, here is the error report : ================================================== Fichier du processus: fsx.exe Nom de l'évènement: Fonctionnement arrêté Heure de l'évènement…

No common CTD, unfortunately, to which there seem to be solutions. In my case: I have run Win 8.1 with 2x2Gb of DDR3 1333 memory for a while and flown FSX Gold SP2 as well without any serious issues; a little low framerates at LFPG, EDDF and ESSA though. Equiped with Gigabyte GTX660 / AMD Phenom II x4 3,2Ghz /Windows 8.1. Sliders in the middle, but for scenery complexety where the slider's at max. In hope to get more flow I installed 4x2Gb of DDR3 1333 memory (same brand and batch). The computer and Win 8.1 starts, but 20 seconds after I start FSX the computer shuts down and restarts. I have tried a suggestion I found in a forum, to start FSX without the F…

Ok, starting to get very frustrated with P3D. I recently did a reinstall of everything and lately I have been getting frequent CTD which all seem to be tied to .NET framework somehow. Pasted below is the most recent one... this happened while I was flying online via vpilot with ASN, REX4 and the AXE. Really would appreciate help. See the end of this message for details on invoking just-in-time (JIT) debugging instead of this dialog box. ************** Exception Text ************** System.Runtime.InteropServices.COMException (0xC000014B): Exception from HRESULT: 0xC000014B at System.Runtime.InteropServices.Marshal.ThrowExceptionForHRInternal(Int32 errorCode, I…

Hey guys. I've been having issues playing FSX on my gaming PC. FSX would sometimes CTD for no obvious reason other than showing "Flight Simulator X has stopped working", and in worse cases, would cause a BSOD with "DPC_WATCHDOG_VIOLATION" errors. Compatibility mode with Windows Vista SP2 was selected prior to FSX being started. FSX is the only game where this is occurred. Temps are cool and stable. Other games like Battlefield 3, Team Fortress 2 and PlanetSide 2 are all stable. Even FlightGear runs well. Here are my system's specs if it will help. CPU: Intel Core i7 4700MQ 2.4GHz - 3.4GHz boosted GPU: Intel HD Graphics 4600 (integrated), NVIDIA G…

I am at a loss. I have included the AppCrashView and I have 13 others I could add as well :( Windows Event Viewer: AppCrashView