The Level D 767 | Wilco PIC 767 Forum

Hello my friends, please I need some help. Just have downloaded from: http://www.speedbirdonline.co.uk/767.htmlapparently cool 767 Zero Fuel Changer utility and I know that

I don't know if this is anything to worry about or not, but when I click the finish button the install and strange a Window's error pops up. It is one those that has lots of "x's" numbers in it(2xeeox.... this is the actual message but similar format). When I acknowledge it, it goes away. Everything seems to work fine,but..., since I am new to the panel I don't know for sure in that something may be working improperly, and I don't know it.Sorry of for the vague description of the error. I have searched for this problem in the forum, but can't find it.I am running Xp.Thanks,Scott

Hello all,I need help with this problem. Everytime I end up push back and and try to move to runway 767 PIC starts going in circles. Have anyone seen this problem before?

I am new to 767 PIC and couldn't get it to work with FS2002 for quite a while. I did a reinstall of both and now it is working fine. I do have a question about the relationship between the FMC and the autopilot. I know this is probably an obvious question, but I can't seem to find an answer in the FMC Manual (which I printed out). It only makes sense to me that the FMC and the autopilot are linked in some way. If I program the FMC for a trip and activate it, how can I link this trip to my autopilot so that that the airplane will automatically fly the coordinates punched into the FMC? Is this automatic when I program the FMC and then hit autopilot? I tried this but …

Hey 767-ers,Anybody know where I might find the Free Spirit paint on the 67? I haven't seen a posky repaint of it, are there any around?Here's a pic from Airlinershttp://www.airliners.net/open.file/323764/M/Edit: a better shot - http://www.airliners.net/open.file/322174/M/Thanks,Greghttp://www3.sympatico.ca/gregory.moffatt/DHC-8_profile.jpg

Hi allwe are all wondering if the next release of MSFS will be compatible with 767 PIC? well according to this press release we should bo OK. Take a look.http://zone.msn.com/flightsim/FS02SpecialFS9.aspwings737

Hi all,Just wondering if you can tell me what I am ment to do with this file. Do I have to place it somewhere in some directory or is it self executing?? Also does this file contain all the sids and stars or is it just for enroute navaids etc???ThanksBarge

I'm now sing the PIC /POSKY mrege with success, howefer when I fly a coupled approach or try to autoland, the aircraft is not tracking hte localiazer properly- usually to the left by one dot. The localaizer is fine, as if I hand fly, I'm right on as always. This seems independant of windo conditions, and I've flown many ILS approaches in the PIC 767 at this point, so I don'k know what the issue is.Tim

hi,i have the following problem:i no longer have airport display on the ND, and it seems that ILS and VOR are not working, they are giving wrong information..i tried to install some new navdata, but did nothing..thanks for the helpPaolo

Well, Im thinking that this is a FS2002 related issue.Hope someone can help.The deal is when i first start FS..and load any aircraft, the engines are running and a few seconds later the shut themselves down. ( without pilot control).Then a minute or so later i loose " power " ///ie lights ..sometimes even guage displays.This occurs after flight as well after engines have been shut down.Please help !!!!CapNoz

I would like to make my own ILS, SID and STAR data for my local airports, but am unsure of the proper format when creating these files. Can anyone offer some help to get me started?Thanks.

Just downloaded Lee's fantastic TCAS gauge. I've 2 PCs running Win XP on a LAN, I was trying to run 2 PIC sessions in multiplayer mode in the 2 machines and see how the TCAS works. It is not working although I used FSUIPC 2.95 and started AIBridge 1.0 on both machines, using either IPX or TCP protocol, only one machine will see one aircraft, not 2 and the same shows on Traffic Look as supplied by FSUIPC. Needless to say TCAS on FSUIPC is set to 40nm.Any help or experience on LAN setup appreciated.BTW, if you just run a non-multiplayer session of FS with AI traffic at 100%, you don't need AIBridge to show the traffic. TCAS gauge is a beauty, many thanks Lee.Francis Leung

Hi guys, I merged the IFDG 57 as directed, but I find on landing, after i disengage the AP and hand fly the approach the thing will bank right over? I even reinstalled PIC, but i cannot get this thing to land without it flipping over right on final?any ideas?

I've searched everywhere for info on this...The cockpit flood lights only light up the main panel at night... the overhead, pedestal and FMC panels are not lit up... can anybody help...PIC767 with FS2002 upgrade and 1.3 extraWin XP ProTi 4600Herve CYOW :-)

Hi guys,I'm wondering what third-party offerings are "vital" to enhancing the 767 PIC experience with FS2K2. In the last year, I've performed the "infamous" POSKY conversion and, most recently, downloaded Lee's fabulous IVSI/TCAS gauge. So... What else do I need? The 767 continues to be my favorite aircraft; but, admittedly, it's getting pretty old. Are there any other "MUST HAVE" add-ons available to keep the 767 competitive with the "latest and greatest" FS airliners? (My biggest pet-peeve is having to manually copy flightplans into the Pilots folder to make them "FMC-ready"). Thanks in advance for your suggestions.Regards,Marc

I have read through the manuals, but am unable to determine the following:Why I receive a "Config Warning" on takeoff roll;Where "trim" indicator is located;How to set altitude at which aircraft accelerates during climb;How to execute a missed approach on autopilot.I am slowly re-reading everything, but would appreciate help on these points. Thanks,Ken R.

So I can listen to ATIS without breaking comms with ATC?I already have the Com panel from the default 777 fitted to the lower throttle panel of the 767 ,so I can switch from one VHFcom the the other or both at the same time.Im not to bothered if the2nd VHF is from another panel (ie wrong color) just so long as it works.Thanks all

Like new, hardly ever used. Price negotiable. Shipping costs and any requested insurance to be borne by buyer. If interested please email me.Chris [email protected]

Hi,I've been customizing 767PIC panel layout to match the layout used in Finnair's B757s for my own personal use. I've now finished with the main panel and I'm pretty satisfied with the result so far.I would also like to add a metric altitude gauge to the panel which can be found from Finnair's 757-cockpits. The gauge displays both the current and MCP's selected altitude in meters. The current altitude is pretty easy to add into it, but the MCP altitude causes troubles. PIC doesn't use the standard FS variables on this one so I would need to get access to the panel's own variables.I thought that the newest patch would have added this kind of support but so far I haven't f…

Downloaded the FMC database from the Wilco website and dumped it into the database file for the Pic 767. Still missing most of the SIDS and STARS and some waypoints. Is there a more coplete database for this product and where can I download it from? Any help is appreciated.Regards...

hi to all!!!first of all, sorry for the cross post ( i posted this on posky forum, but didn't had any cue, so hope to be more lucky :-))here my questions...1] i didn't noticed before but playng around with my posky 767 + pic panel i saw that when i open the doors i get a caution light on ( door open) and that the aux apu air flap openscloses as i turn onoff the apu...i though cool! but now i reinstalled fs... put on all add on i had before...and the apu flap is comanded manually with cool flap openclose, and i don't get anymore the door's warning message...why ????any idea??? 2]do you know how to put a frequency with a decimal into the adf???ie 300.5?? if i put this…

I am sitting at Megs field {the default FS flight} with PIC 767. I have not moved the aircfraft and it's day. Zoom is @ .65. What do some of you guys get here?Best Wishes,Randy J. [email protected]" A little learning is a dangerous thing"AMD XP 2100 |MUNCHKIN 512 DDR RAM |ECS[/b ] K7S5A MB |[b]GF3 64 MEG |WIN XP PRO |MITSUBISHI DIAMOND PLUS 91 19"

I've installed Lee's PIC767 Tcas.Setup a multiplayer host session. Started AiBridge.Will the Tcas show the AI traffic, or do I need to be online, Vatsim etc ?If it should, then another problem I have, which may be the *main* problem ;), is that I'm not seeing any A.I. traffic period. I've set the ATC options to 100% traffic.Mike

Hi,When I try to Arm the Spoiler (Shift+ / ) I get Spoiler 100% Deployed and not armed.Any idea ?Thanks,Ulisses

Can't wait any longer for FSBuild2.So Ernie, just for me, can you try a guess on when FSBuild2 will hit the road ? Even a rough guess would work for me...Bien amicalementMichelKSEA-AFR011