The FLY General Discussion Forum

Since istalling my new yoke, I notice its hard to tim out any Fly!2 aircraft without the porpoise effect and I`m constantly fighting the yoke to hold attitude.Any suggestions?.Kind RegardsAndy

I had to get at least one livery up and flying to keep up with Pete. Allow me to share this NAL757. Needs a few more cosmetic touches, as do the rest of the liveries I have lined up. In the paint hanger now are:American AirlinesDHLUS AirwaysAir Holland (new scheme)British Airways (old livery - Speedmark)British Airways (3 Utopia versions)DutchBirdThat makes 10 liveries coming, including the NAL. Stay tuned.Grant

I have these strange receding horizontal stripes on runways, taxiways and water. Can someone tell me how to get rid of them? Video card Diamond Stealth III S540.Tks in AdvanceCesar/Venezuela

I NEED SOME HELP WITHFS BUILD ?WHEN I BUILD WITH FS BUILD AND AUTO GENERATEEVERYTHING WORKS FINE. BUT WHEN I CLICK ON QUICK FLIGHT AND CLICK ON : eg: (lets say) kdal-kmiaI GET AN ERROR: LOADING FS BUILD ERROR:STREAM CORRUPT. CANNOT PROCESS NEXT TAGLINE (FILE)FILE: STREAMIO.CPPLINE 826 BUT I TIED TO LOOK FOR THE SIT FILES TO SEE IF I HAD ANY IN THERE ! WHERE DO THE SIT FILES RESIDEAND, ALSO WHERE IS THE DEFAULT.KEY FILE ? JEFF AKINS:-zhelp

Pardon my ignorance. Could somebody please tell me how to take a screen shot in FLY!II and to what directory it goes to? I thought that is was shift-s. I tried that and nothing.Thanks,CB

Check out this post in the PMDG forum.CB

I know that this probably has been asked by now but I can't seem to find out any references to it, so here goes..I have been using Fly 2k with the SKY, Ground Control, and C4TO add ons for some time now and love it. My question is this, if I go to Fly II will I have to add the same add ons that I have with Fly 2K? Is the secenry in Fly II much better than Fly 2k? What are the differences? Appreciate any help!Thanks,DickS

I still have the samething happen no matter what.After flying for no more than 5 mins my computer restarts.I know it's the famous loop error.Iam still the only one dealing with this.I reinstalled fly2 today with no problems.Flow around for 20 or so mins with no problem.The all of sudden it happened.just as a before and now just as before it does not stop.I just can't get rid of it.Being a fly support since the beging i do not give up easly but iam at my wits end with this.I done everything by the book for upgrading fly2 as stated in the FAQ here.My system is completly up to date.i have not seen this issue in the forums for a long time so i figured i would give it another …

Here's the first cut on the new PMDG 757-200. It could be finished by mid week but I need to check with Robert on the paintkit. Forgive the small image size, JPEG issues.Pete

Hi,Could anyone tell me an internet address were I can find a forum like this avsim one that I can get support for computer hardware?I am building my own computer and have some questions.Thanksric

I'm getting an occasional problem with a DRAW VERTEX error mainly when changing views the error comes up an FLY crash's to the desktop can anyone shed any light as to the cause of the problem. Thank's Wayne [email protected]

Tell me what you think, These shots are all non edited, compressed jpgs.different sky.ini may have been used in different shots. Enjoynote: make sure you have your desktop set to 32 bit for best results. Shots are taken, around Larnaka airport in Cyprus, Switzerland, the early morning ones over NYC and another bunch on the way from Montreal to Charlevoix ( east) and finally a few over photoreal Las vegas terrain.http://littleitaly.fortunecity.com/cremona/190/

I constantly Crash to Desktop w/ the message. can't load testure Osprey.Raw and I am unable to get excessive Left Rudder trim out by any means whereas my rudder pedals work fine on all other sims.Any Ideas?AMD DURON 600, GigaByte MOBO, Win XP, 664 MB Ram, Thrust Master FLCSATI Rage Fury Pro 32MB VRAM

Hope this works this time. Unable to start fly11.

OK this is a first for me - flying over France I got this message:Unable to open file: datad002167fulltex2.rawThis was followed by a crash to desktop. I do not have a d002167 directory, so I'm guessing this refers to some pod's info. Anyone have any ideas?

Can someone tell me what the other options would be,

I am in the process of making VFR navigation maps available within Fly! of the Benelux. As I am scanning from an original Jeppesen chart the first question that comes into my mind is if I can share this work on the Avsim library without breaking Copyright issues.Has anybody had the experience with this?Mannie

Is there a way to cause Terrascene to render textures at a resolution better than 7.5 meters/pixel?? I know that FLY! cannot do better but this is for another project.Thanks,Dick

The win98 joystick calibration box indicates that I have my yoke working properly. When I enter FLY or fs, the joystick is not recognized. The throttle works normally. In the axis set up window, I can move the throttle and the program will recognize the axis--but not the ailerons and elevators.I have reinstalled the drivers, the win98 control panel shows everything normal. Any ideas, short of a reinstallation? thanks.tony

I have built several Global Titles using Terrascene 2.1 for FLY 2. The problem is that Fly 2, "sometimes" does NOT load my new scenery, but loads the generic Fly 2 scenery. It seems to very, sometimes it works, sometimes it does not (load new scenery). Any idea why this is happing? Is there something in the start up file that needs to be set or checked?Thanks,Jim B

Some shots......http://ftp.avsim.com/dcforum/User_files/3cdd4a0409b59a92.jpghttp://ftp.avsim.com/dcforum/User_files/3cdd4a1609ed172c.jpghttp://ftp.avsim.com/dcforum/User_files/3cdd4a2b0a32744d.jpghttp://ftp.avsim.com/dcforum/User_files/3cdd4a450a79e327.jpghttp://ftp.avsim.com/dcforum/User_files/3cdd4a580acbc144.jpghttp://ftp.avsim.com/dcforum/User_files/3cdd4a690afd6538.jpgJohnny"I'LL BE BACK"[div align=center]http://www.avsim.com/hangar/fly/josve/fly2/vas.gif][/div

WHEN I GO TO SELECT THE TBM 700 I GET THE SUBSYSTEM .CPP ERRORI HAVE ALLREADY DOWNLOADED IT AGAIN.REINSTALLED IT , AS I TOOK MR SALTER`S ADVISE DELETED FLY!IIREINSTALLED UPDATED THE PATCHES. NOW WHAT THANKS FOR YOUR ADVISE AND SUGGESTIONS JEFF AKINS

Hi,When can we download Simvol`s ATR42 ?The plane looks so gooood:-lol !!!I hope it is as realistic as the incredible TBM700.But when we talk about Simvol...-the products are always perfect;) Bye , mikeair

What does this message mean and what to do about it?

The MD-80! Made by the great Italian Giorgio Gnesda!!Here are some pics!!http://avsim.com/hangar/fly/josve/fly2/jet/md/md1.jpghttp://avsim.com/hangar/fly/josve/fly2/jet/md/md6.jpghttp://avsim.com/hangar/fly/josve/fly2/jet/md/md10.jpghttp://avsim.com/hangar/fly/josve/fly2/jet/md/md2.jpghttp://avsim.com/hangar/fly/josve/fly2/jet/md/md4.jpghttp://avsim.com/hangar/fly/josve/fly2/jet/md/md12.jpgMore pics at The Fly! Zone!Johnny"I'LL BE BACK"[div align=center]http://www.avsim.com/hangar/fly/josve/fly2/vas.gif][/div