MS FSX | FSX-SE Forum

Hi there, I enclosed a screenshot. Do you know what is wrong there? Last time I did visted Corfu everything was fine, but now I get this weird mesh problem.

Hi, I just took the ENB form BlueSphere but what I dont like is that it makes even the ground textures blue, I want that they be original green and not blue. The only thing I want is that the sky haze is blue like this picture below, you can see that in real life only the sky haze and horizon is blue but the ground textures stays colored and not in blue. The question now is, do I need to change the enb ini. file or even the enb palette?

HI, help required................ What im trying to achieve is a two monitor set up with my Nvidia gtx 570 GPU on a win 7 64 bit,8 gigs of RAM. Im after having the whole cockpit on two screens,i have a 24" as my main screen and to the left is a 22" and have them set up correctly(extend display) what ive manage to achieve is to add the 3600X1050 screen size via the Nvidia control panel(i just added 1680 X 1920) and that makes the whole programme fit the two screens nicely in window mode which is what i want but the problem is: The visual graphics only seem to just overlap on to the second screen what im assuming is 1920 (size of my main monitor) being disp…

I have FSX Gold. Would it be possible to download aircraft, scenery, etc. that is listed under FS2004 ? Doesn't FSX have FS2004 in it? Thanks in advance.

Hi, I've had a problem with the Live Camera. Everytime i move the eye point in the VC of the PMDG 777 i loose the ability to select anything on the VC. Any suggestions on what i'm doing wrong? Many Thanks Danny White

So I have been tweaking my fsx (again) and I found a woai flightplan file for kai tak traffic. I would like to delete the woai flightplans but keep the aircraft so the kai tak flightplans can use those planes and not have duplicate airlines flying around. Sound confusing enough? I have aifp but find it highly confusing even though there is a 60 page manual (haha) thanks

Hi, I am trying to set up AlacrityPC on a winxp 32 bit version to increase a bit performance for my fsx. In the instructions for the profile i note that in the editing section, at the bottom of the window, you can see Set to Recommend Action....however in the window i get on my pc this recommendation is no where to be seen and I am afraid to go ahead and manipulate anything without having any knowledge on the processes...this is completely chinese to me... so my question..any idea how to get this Set to Recommended Action to be seen please...or better still...anyone has a good profile for winxp 32 bit to run fsx. many thanks emann

I started fsx two days ago, and all, and i mean ALL the land was shown as water with autogen on top. I reainstalled 3 times, deleted the files, repaired the registry with the flight1 tool. I dont use UTX or any terrain mods for that matter. I did in past use terrain mods, but never UTX. I only have a couple payware planes. Specs: Phenom II X4 965 @4 GHz, 8GB RAM, 1TB HDD, GTX 650 Overclocked w/ 2GB VRAM thanks-Morris

Hi Guys I'm using FSX with accelerator and a CHUSB 3 lever Yoke with PMDG B737NGX Recently even the slightest touch on my Yoke and the nose dips and the plane plumets, I cannot get the Elevator to realign in its neutral position have tried adjusting trim wheel on Yoke but it is impossible the elevator podsition indicator on the FMC controls pg shows the elevator needle either fully up or fully down and cannot be realigned manually and I have calibrated so many times to no use, I recently installed EZDOK and have now unistalled it and reset my defaults but the problem continues with the plane just rocking up or down or falling unless I wrestle with the yoke plane is inc…

HI, the problem i´m having is that the cockpit lights on my NGX are not working. i move the switch, but they remain off. However, when i turn my MAIN PANEL, OVERHEAD and PEDESTAL to on, they work. Thanks, tatin 98

Hello everyone! I have learned that when considering a product you have to take into account FSX memory limitations. So with that in mind my question is: Can I fly LatinVFR KMIA, PMDG, and Miami City X without OOMs on DX9? I know this also depends on my general FSX scenery settings and AI traffic which I have toned down to a point where I do not get OOMs and I am happy with the compromise. Thanks for the input!

Ok, at the risk of opening a can of worms here I have a couple questions. I have been a long time flight sim user but have until now not been able to do much along the lines of addons due to poor PC. I have solved that problem and am ready to take the plunge. This is what I was planning... at least until a few days ago. I planned to purchase AS2012 so I could finally experience "real weather" for the first time, even though I have read the textures aren't the best. Now I am seeing ASN coming out in the "near" future so now not so sure what to do. I was willing to sacrifice graphics slightly for better weather with AS2012 but now with ASN I see no textures included.…

Hi guys. It has been many many years since I last used Vatsim and I think I would like to again but have hit a snag with squawk box. I have installed it so I can have it running on a separate pc. All seems to work ok apart from when I connect on my laptop and the little squawkbox window appears in the cockpit of my FSX machine. When that appears Vsync disables and I end up with some frankly nauseating screen tearing. I have spend ages this evening trying to find a solution. (one of which was to try and install FSinn) and the squawkbox forum has about as much life in it as a mausoleum but have not found the answer. If anyone has any idea how to get rid of this …

Hi I cant seem to get my cockpit and the outside an the screen at the same time. Its all too large...even after zooming out. I am using 2 x hanns g HG281D and 1 x hanns g HZ281 monitors and getting 6116 x 1200 x 32 in the game.Bezel corrected. Am I doing something wrong? Very frustrating having to move my view up and down to see out or to view my speed. I can open a new window and place the dials in the right place but its messy. Pls help!

Hello I sue http://www.venetubo.com/fsx.html to mod my fsx cfg file however it is down at the moment for some reason, anybody else have this problem and know when it will be back up or any alternatives? Thanks

I am flying the A2A C172R right now and I have a hard time setting the exact heading using the HDG bug and the right OBS on the VOR gauges because the plane uses the default FSX mouse wheel acceleration (when you start scrolling, you start with small steps but within no time you are taking huge steps which makes it VERY hard to precisely set the HDG and OBS). I've read that FSUIPC has an option to disable this annoying behaviour but I wondered if there is another way to get this done by hacking some file...? I fly with DX10 and so I don't have tooltips and setting the exact radial and heading is hard to do and very annoying...

I read the FAQs on the Majestic website about the bouncing problem and possible fixes. In my case, my aircraft behaved perfectly the frist five weeks I had it, but yesterday it started boundinc on the ground upon initial load. I reset the flight, went on slew and back to normal, but not of that stabilized it. I tried the fix in the FAQ, but that did not help. I did not change anything in my computer configuration or FSX during the firtst five weeks I was flying the Dash 8. Any ideas on why the bouncing could start so suddenly? Any permanent fixes planned? I uninstalled the program in the meantime. I really like the aircraft and hope for a solution. …

Yesterday I've installed Dubai rebooted for the first time since was released, I was thinking, OK maybe I wont have 30FPS on this scenery, it's so complex and with the PMDG 777 it will put my PC on it's knees! After the installation was complete I was prepare to see and prayer to have at least 15-20 FPS. The plane was on the runway (PMDG 777) I pressed Shift+Z and bang 30FPS SOLID!! I said, WHAT???? This can't be true, how come 30FPS on this scenery? Than I have created overcast condition and still 30FPS, I have moved the mouse on the cockpit 28 FPS at the minimum. I'm amazed about this. All this time I was afraid to install this scenery because I didn't expect so h…

Hi all, I'm trying to source down a couple of vibration files. Does anyone has a realistic vibration setting for both the MJC DHC8 and the PMDG T7? Or where may I be able to find them? I tried googling for froogle's settings but didn't get much luck. He has the camera set, but not the vibration (that I can find). If anyone has some realistic setups, and don't mind sharing, I'd be very happy to try them out! Thank you in advance.

Anyone know where I can find a decent pilot able blimp either freeware or payware. My three year old step son can't hang on to my planes yet, so I thought maybe hooking him up with something more tame like a blimp.

Hello fellow simers, What website do you use for you satellite imagery, radar, notams, windsaloft, etc? I use airjourny-weather.com since I mostly fly in the caribbean its really good. I just noticed that it has other sections too like North, South and Central America, Bahamas, Europe, Australia, etc. It's just nice to have all your weather needs in one location. I hope this helps, E.G.

Hello! I have just upgraded the drivers to 327.23 and my suprise came when I turned FSX.. The antialiasing was lost. I always use it through Nvidia Inspector. Opened it.. and seems the same parameters didn't change but I don't have antialiasing now. Does this happen to anyone else, and know how to fix it? Thanks!

When I get on FSX and fly, my game just stutters. When I go to NVIDIA Inspector to check my GPU usage, and it goes to 100% and How can I fix it? It used to be around 60%. I don't know what happened?

Flight start, departure and cruise is all normal and fine, then seemingly all by itself randomly in the middle of the flight, the 'Brake' word in lower left corner will come on. I've check and yup, brakes psi in the plane is fully applied. When landing, plane stops very quickly and will not move once stopped on the runway. Doesn't seem to matter what plane. Happened to me in a Captain Sim 727, freeware Lockheed L-xx49 Constellation and Concorde X so far. I've tried unmapped all brake keys, checked parking brake in plane and options and check unmapping for brake axis. Nothing I try unsticks the brakes. I fly pretty simple, only use mouse, keyboard and Rumblepad 2.…

Hey, I started wondering cause OPUS kept saying "No data available at present" when i tried to check weather. No matter where i was. So i used the spy program and i saw "Unable to extract and decode GRIB data" there. Also few rows down after "Dynamic weather created" I saw error message saying "Failed to establish link with FSUIPC error code 14" Any ideas how could i fix this problem? Thank you. -Marko-