MS FSX | FSX-SE Forum

I am getting this at London Gatwick, anyone have any ideas why? I edited my .cfg according to the Avsim hardware/software guide with these entries: [GRAPHICS] HIGHMEMFIX=1 [DISPLAY] TEXTURE_BANDWIDTH_MULT=120 [GRAPHICS] TEXTURE_MAX_LOAD=4096 [DISPLAY] UPPER_FRAMERATE_LIMIT=30 [TERRAIN] LOD_RADIUS=4.500000 [DISPLAY] WideViewAspect=True [Main] FIBER_FRAME_TIME_FRACTION=0.2 UIAutomationCore.dll placed in the FSX root folder I have edited some of them, such as the bandwidth (setting it back to its default), but no change. Many Thanks

Anyone know how to stop the FSX.cfg file resetting every time I start FSX. Many Thanks

Hi, When im taxiing from the taxiway into the runway and about to get in the air i first need to get speed ofcourse on the ground, but i fail at it? i cant keep going in one straight line im going from left to right pls help?

I don't run dx10 but I use the shader3 mod. In REX can I check the boxes for dx10 waves and water? Will the shader3 mod make the effect work?

I'm looking for the latest navdata, the worldwide.bin file I think it is called. Does anyone have a Garmin database from 2013?

I was hoping the latest release of Scenery Config Editor would fix the issue of some areas not being properly placed back in their group when using "RESTORE GROUPS FROM BACKUP". For me, it was about 30-40 areas I always had to place again manually, somewhat of a pain. Well, the new release did not fix that for me, so I dug into it and found out why this is happening, and, fixed it in my case. I found two things that will prevent the program from restoring an area to a group, both easily fixed. #1 - Any scenery area with a location that ends with a " \ ": Local=C:\Program Files (x86)\FSX Add On Scenery\Addon Scenery\PWS Vol 1\ needs to become: Local=C:\Prog…

Just a heads up, World of AI flightplans have been released in the AVSIM library for none other than ALL four of the biggest U.S. Airlines, with SUMMER 2013 schedules! This is incredible news, because not too long ago there was talk WOAI was shutting down. For you folks tired of seeing the old Northwest liveries in your AI skies, or are missing out on seeing the new American colors, you are now in luck. WOAI had been on the decline for the past few years, as it appears to be a difficult task to compile the program that auto installs the paints and models and merges them with the flightplans. It was mainly because of the slow release schedule a few years ago tha…

Hi guys, yesterday I've downloaded version 3.34.1 and I have two problems. The first is about DHM. Whenever DHM is enabled and the effect is starting, my eyepoint is set to a position way further back and higher then my default eyepoint. Disabling DHM solves this but I like the DHM effects very much. A second thing is windshifts. During climb and descent in the NGX I experience severe windshifts. Sometimes a sudden 180 degree change or sometimes the wind spins 360 degrees during 10 seconds or so. I have the Adjust Sim Friendly Options and Use Maximum Stabilisation options ticked. Also Wind Stabilistion and Automatic Windstabilisation is ticked. I always enter …

Gooday gentlemen, Title says it really, I use P3d but just reinstalled FSX to try out the T7. I have filled out both paths in the Opus Config window. OpusWeather option doesn't show up in the FSX World/Weather window as it does in P3d . Any guidance please? Many thanks in advance. Gareth

I know the site says that the scenery is not compatible with FSX but I'm wondering how well or how poorly it actually works has anybody tried it. Lots of their stuff looks great.

Just a heads up, World of AI flightplans have been released in the AVSIM library for none other than ALL four of the biggest U.S. Airlines, with SUMMER 2013 schedules! This is incredible news, because not too long ago there was talk WOAI was shutting down. For you folks tired of seeing the old Northwest liveries in your AI skies, or are missing out on seeing the new American colors, you are now in luck. WOAI had been on the decline for the past few years, as it appears to be a difficult task to compile the program that auto installs the paints and models and merges them with the flightplans. It was mainly because of the slow release schedule a few years ago tha…

Shot from FSDG's germany-x: ?

When I choose a weather theme in FSX, how can I determine which clouds are loaded? I want to use FEX to generate weather themes and I need to know how they link to the FSX weather theme. For example, I create a FEX theme using the cloud Extreme Realistic......which FSX weather theme will use it? In FSX, do I select Fair Weather, Building Storms or ?????? I would like to be able to tie each FEX cloud theme to the appropriate FSX weather theme. Any suggestions would be greately appreciated. Thx in advance.

I'm looking for better AI sounds for props and jets for my AI traffic. Is Flight1 Audio Environment Airliners edition good? Also it says enhances AI traffic but I see nothing there about props, only jets. What's the best AI traffic sounds to use with an addon like Ultimate Traffic?

Never had any problem with FSCommander flight plans but now with PFPX it exports the .pln file with no gate assignment. I end up going into the file and manually inserting the gate before opening. When you load your plan and it asks if you want to move your acft to another location you click "yes". I then click the location again and change the location to a gate instead of the runway that was input with the flight plan. The problem is that I can't click on start flight... it is greyed out. If I tell it to find route it gives me an entirely new FP. Been simming for years and never had this problem. What's up? Any ideas? Jeff

Just a quick question... Is polar flight actually possible within the world of FSX? I ask as a search on Google gives me no results with the answer I'm looking for. E.g. a flight from Toronto to Hong Kong. Thanks a bunch.

Not sure which is giving this problem but when I toggle pause on and off my view will change a bit (see pics below ) I set my view ezdok by pressing 2 adjusting it then press 2 again just like usual. Then when I toggle pause off so I can look around my view will jump up higher and closer to the dash. It used to be that when I hit pause it would just stop my view right where it was. It used to just smoothly stop and start when I toggled on and off. Not sure if I change something by accident any thoughts appreciated. PS I have precision on. sorry for double post

Hello everyone, i am posting this topic just to try to understand if i'm wrong or there something strange in this plane... I hope the first one ^_^ I use to fly this 320 quite easily, but sometimes it pi**es me off a little bit... Here I come to the problems: ---I'm all ready to take off on my clean and nice runway, so i apply thrust to TOGA/FLX T. and i lift off at my Vr... SUDDENTLY as soon as it feels that is free to play with the throttle (when the A/T has been engaged), it starts to accellerate to speeds like 280kts or above... which are illegal under FL100. I understand that i could be a matter of thrust power to set when setting up the FMC. My stadard initia…

Hi there, I am having some moments of frustration (mind you, I'm used to these around FSX *sarcasm*) with EZdok camera, as I can't get some of the things to work. I like EZdok for it's dynamic camera system, but the setting up of it is rather difficult I was wondering how I could fix these: 1. When I press and hold SPACE, I can look around with my cursor. But almost about a second as soon as I stop moving my cursor, while still holding down the space button, the view changes back to the default. Default being where it was before I moved the camera. Is it supposed to do this? Or is it supposed to stay where I stopped moving? I tried to disable Middle Mouse Button …

Have spent last 2 weeks trying to reinstall FSX which had been working perfectly well for several years apart from usual minor hiccups. Everytime I try to install FS Acceleration Expansion Pack I get the message "could not open Key" and installation rolls back and terminates. I have tried reinstalling a drive image of FSX which includes the Acceleration pack and which worked up to 2 weeks ago but then I get "fatal error". I have tried completely wiping FSX from PC and reinstalling from scratch but with same result. I have tried a completely fresh installation of Windows 8 but still get same result. As far as I can tell all equipment works okay and I have done virus and m…

http://qwsim.flight1.net/forums/topic2806_post18796.html#18796 SP3 adds some fixes for the Avros and now the analogue 146s.

I have a camera from this position... Pretty much for any and every aircraft! I usually remove all EZDOK views in any aircraft.cfg But I am unable to get rid of this. EZDOK Aircraft Universal camera I want to permanently remove this (with extreme prejudice) or at the worse case how I can I modify this to something that remotely has some utility? Hopefully if I can modify it, I want to do it once and then onwards that would work for all aircrafts I have now and I may get in the future. Every time I see this view.. My blood pressure shoots up.

Not exactly sure where to to post this. I was having some sound issue with Real Air Duke V2 and tried to reinstall Direct X (The latest). But I am unable to install it. Any ideas? It fails with a pop up error: An internal system error occurred. Please refer to DXError.log and DirectX.log in your Windows Folder to determine problem. DXError.log contents from that install: -------------------- [10/11/13 12:07:59] module: DXWSetup(Mar 30 2011), file: dxwsetup.cpp, line: 229, function: CDXWSetup::InitInstallEngine Sections are not initialized. -------------------- [10/11/13 12:07:59] module: DXWSetup(Mar 30 2011), file: psheets.cpp, line: 705, function:…

http://www.orbxsystems.com/forum/topic/66203-ftx-global-freeware-airports-na-pack-3/ Includes these beauties: KMDQ, Madison County Executive, Huntsville, AL KAUO, Auburn-Opelika-Pitts, Auburn, AL 8A1, Guntersville Municipal Joe Starnes, Gunterville, AL 3M5, Moontown, Huntsville, AL - turf KHSV, Huntsville, Int'l, Huntsville, AL I69, Clermont County Airport, Batavia, OH - home of Sporty's Pilot shop KSSI, Malcolm Mc Kinnon Airport, Brunswick, GA KCRQ, Mc Clellan-Palomar Airport, Carlsbad, CA KGCN, Grand Canyon National Park Airport, AZ Woohoo :rolleyes:

Hello. I just got my Opencockpits MCP v3 delivered yesterday. However, they forgot to include the power supply with the shipment. I have an e-mail to them as well, but was wondering in the mean time if anyone that has one of these can tell me or even better yet, show me via a pic, what type of jack it is? In the manual it shows a pic of what looks to be a standard 3.5mm stereo headphone type jack("male") but all I can find on the web are "female" versions. Can anyone help me out with a pic of the power supply that came with this unit or one that you know works to power this? I was thinking I'd just try to get one at Radio Shack or order from Amazon rather than…