MS FSX | FSX-SE Forum

Let me first start off by saying that I have just done a swap between FS2k2 standard to Pro. Before uninstalling the standard edition, I saved all of my add-ons. When I installed Pro and put all of my add-ons back, this is what happens. So I uninstall and reinstall w/out my addons, and it happens still. All of my airports are like this. The rest of the scenery is fine, just the airports. Could someone explain what might be wrong here? Maybe it has happened to someone else? My specs are: PIII 550, 320Mb, Radeon 8500LE. Also, I tried different drivers, but to no avail. Any input would be greatly appreciated!Thanks in advance, Matt

I am an add-on freak and I have most stuff known to flightsimming man. I have both the "Chris"s clouds, environment upgrades, FSUIPC etc. etc. However:1. I still seem to have a "shelf" at whatever cloud base I set i.e. a flat line, which usually shows a distinct colour change. If I have overcast clouds set, it's like a ceiling to fly into as I climb. Is this right? Should it not be more ragged?2. My add-on clouds often show as two-dimensional sheets. Is this unavoidable, or do I have my settings wrong (mostly maxed at present)?3. Is there any way to change the standard Microsoft "blue" sky. Yes, I know the colour changes with viz settings, dawn, dusk, etc, and t…

I have been checking the online shops and as well as retail stores and I still have not seen any scenery design programs for FS2002. I'd like to tweek my local scenery and improve rivers, add some buildings, etc. Are there any good, easy to use, design programs around and where can I get them? Thanks. ;)

news story out of chicago today:bc-MEIGS--LANDING--B&S 05-30 0165 A single-engine Cessna 172 landed "gear up," according to Federal Aviation Administration spokeswoman Elizabeth Isham Cory. She could not immediately provide further information about the landing, except that no injuries were reported. The FAA will complete its investigation within several weeks, she said. - - A small plane made a belly landing at Meigs Field Thursday after experiencing trouble with its landing gear. No one was reported injured. Emergency crews responded at about 11:46 a.m. to a still alarm at Meigs, at Lake Shore Drive and 15th Street, according to a fire dis…

Once again, a big thx for this terrific free aircraft.http://ftp.avsim.com/dcforum/User_files/3cf6781b69713460.jpg

Based at EGHH Bournemouth UK

I have showed various real world Storms and heavy cumulus shots in the day over the past week and taken from the Senecas N95D and N145DR.Here is a Sunset Storm to compare to what we have ( taken in the Citation )and a couple of sunset Seneca shots.Peter

Recently I downloaded several Boeing 767-300 gMax files. But there had been only black bitmaps in their texture folders, so the whole mashines were black.What could be the reason for this or how can I solve this problem?

Hi SimmiersI recently released a file (kase.zip) to place the ILS approace at Aspen Co airport to aline it with the runway.But after reciving alot of e-mails regarding that it was already where it was supposed to be,(It was my own ignorance for not checking real approach plates), I would like to applogize to everyone.In the future I will double check everthing if I decide to upload a file.I am sorry for any confusion that I may have caused.Ray

Paco is soon to release a Fantastic new version of his ATR and has virtual Cockpit and EVERYTHING :)It is really Spendid and as he is kind enough to send me Preview I have now made a Template to repaint it.I Would be Happy for any body to say if they like a perticuler Livery and Will be happy to do it for you .Thank you Very muchAnniette xxxxxxxxxxxx big one for Paco (who is real nice helpfull ,friendly,and all together great person X)

I love fixed wing but are there any felicopters liek the BK-117 for FS2002?

phil I completed a Flight from Gatwick to Dallas Ft Wth Intl using a Boeing 777. When I came to make the return flight after going to the Flight Planner, I took off and crashed over Toronto because I had run out of fuel. I read the handbook, which said go to Aircraft and Fuel which I did, but this only tells me the types of tanks on the aircraft and quantities they hold. I would like to return to Gatwick before my visa runs out lol. Please help.

No solid benchmarks (yet) but as soon as I get the time to d/l 3dmark and if I ever get Sandra working I'll post the results. Results:Athlon XP 1700+ (AGOGA Palomino core)stock rating: -11x multiplier -133MHz FSB -1.75V Vcore-retail HSF-1.466GHz o/c'd: -stock multiplier -150MHz FSB -stock voltage -retail HSF-1.650GHz (16.666MHz shy of true Athlon XP 2000+ rating)o/c'd temps w/open case: idle: 42C (CPU) 34C (case)full load under Prime95 stress testing: 48 C peak (CPU) 38C (case)100% stable (so far, <>)under full load Prime95 stress testing @1.65GHz/150FSB. I checked out the Athlon XP overclocking database at vrzone (http://www.vr-zone.com/guides/AMD/AthlonXP/) and…

Okay, so maybe that sounds stupid, but inquiring minds want to know :>) This little plane flies so sweet and gentle that it makes everything else seem like piloting a brick. Are the secrets contained in the cfg? If so, are they something that can be applied to other craft, or do they have more to do with the weight and balance of this particular vehicle?As much as I love flying the Deb (and thank you thank you thank you to those who created and tested it) I do like to fly something that can land where the Deb can't -- on water (sometimes there just *are* no airports ). I only wish any of the amphibs flew half as nice as this little plane.

Hi guys,I'm really enjoying Geof's new offering - but I can't seem to find the Avionics Master Switch... is it implemented? Believe me, I'm not complaining (the B33 is a work of art) - I just want to know if I missed something in the docs... it may be time for me to assign a key-combo to that particular function.Regards,Marc

Does anyone knows any source where I can find how to do fuel planning in the beautiful F50?

Have you gotten tired of using the keyboard to use the ATC? My Thanks go to Bill Morad, who created the ATC panel that can be toggled on/off and allows you to toggle the ATC commands with the mouse. I posted a question here to see if some expert could do this and lo and behold Bill answered my call with this spledid addon. I have included a screenshot of the C182RG with the gauge installed. The circled area shows the ATC toggle button.The arrow shows the ATC panel. From here you can toggle 0 through 9 to toggle the ATC commands. It is a simple install and Bill wrote a GREAT readme with all the necessary info on installation.He posted it here at Avsim today. Hope you all l…

I've completed my final upgrade for Landclass Assistant, which includes these three new updates:-A dropdown landclass selection box-An "Update" button which will write the lat/lon info to landclass.inf-A position indicator showing where in the .raw bitmap the grid is atThis is my final upgrade. I attempted to incorporate as many suggestions as I could given the time I had to work on the program. It will require a previous installation of Landclass Assistant.Regards,JohnAuthor - Landclass Assistant

I am new to this Combat Sim, ver 1, and posted this message to the proper forum but it seems very, very quiet. I know that many FS'ers also use the COmbat Sim so thought I'd try here for some advice. Hope I'm not out of order!Just got a copy of the first version and I want to run CFS1 without the CD always in the drive. I have already patched it for no CD. My question is what other things do I need to do to have it run fully from the hard drive, i. e. editing some cfg file, copy some CD directory over etc.If there is a site anywhere which has this info posted I'd appreciate the URL.Also, are there any updates to this program like happened with some versions of MSFSThanksb…

soon as they are submitted? I just did a double post, cause I thought the first one did not take. Is this AVSIM's policy or PSS's?Thanks...BobP:)

I've just encountered a problem with the Deb's moveable panel and wanted to see if anyone else has encountered it and has a solution. I've been flying the plane since it was released without a problem. When I loaded the plane today, however, I had difficulty getting the panel to appear at all. When I finally got it to appear, I could move it down on the screen so that just the top row of gauges was displayed, but the lower third of my screen underneath the panel is just a black band. In other words, if you're lined up for take off, the runway, for example, extends only 2/3 of the way down the screen and the rest is black, except for where the panel is. This occurs in fli…

My system: p3,1g,512ram,win98,ti4600 vcard.Since I first tried landclass with mesh I have both purchased it and dl it to enhance the scenery of different areas. Now my system is not the best but it is no slowpoke either and I have sliders set at reasonable levels (midrange) except for autogen which is dense. In most areas the fps is fine and smooth.But I love Norway and particular the Sognefjord area and with default scenery (no mesh,no landclass) I get tons of trees, it's beautiful. BTW config is default values. Scenery and autogen loads very quick as I'm flying. As soon as I put in the lc file(no mesh yet) only 313k the the scenery no longer loads quick, seems to be…

Before the questions, I just wanted to say this aircraft is great and give my thanks for making it available. Now the questions.1) Where is the pilots handbook referred to in the reference tab of the kneeboard? I though there was one visible immediately after installing the aircraft, but I may be confusing it with another plane. In any case, I can't find it installed anywhere on my computer.2) Is there an avionics switch on this plane? I tried staring it with a cold cockpit and could not get the radios to turn on. I had to change to a default aircraft with an avionics switch and turn that switch on and then go back to the Debonaire.Thanks.

I bit the bullet and bought the RealityXP stack. After copying the panelxp.cfg to the Deb panel folder and then renaming it, the radio stack appears to have some missing gauges and what is there appears a little distorted and squashed. The only thing that looks like RealityXP is the GPS. Any ideas?

I don't know where to ask so i will ask here. how the heck to i take a screen shot to post? thanks in advance.