MS FSX | FSX-SE Forum
Subforums
96377 topics in this forum
-
Hello, I have OPUSFSX since his release, unfortunately I meet a problem with cloud cirrus when an update is made. The textures of cirrus are double and fuzzy. Why!!! I have for information the last version 3.51.1. Thank you.
-
- 1 reply
- 1.1k views
-
-
Hi, I just bought the Abacus 787 and think it is very quality my new favorite plane but I don't understand why it says "smokeing" and why the rudder moves perpendicular instead of side to side. Also the winds seem way too curved up and the wingtips swing way up instead of back. Is this normal? Also I think there is something wrong with my system because there aren't very many buttons on the cockpit at all, it just looks all black for the most part. Can someone help? Thanks.
-
- 50 replies
- 11.8k views
-
-
Hi i am planing on getting a new engine sound pack . I don't know if it is possible with the captain sim 757. But once downloaded the just flight 757 an there engine sound really impress me i really like it . The only problem with that aircraft it is kind like a default 757 which uses FSX gps not CDU or FMC . But i have to say the engine sounds great way better than Captain Sim 757 engine sound. So guys if you have any suggestion you may add for me to get a great sound pack for the 757 please post any like to where i can purchase one .
-
- 8 replies
- 3.7k views
-
-
I had assumed that because the engines always started up opened whenever I had discovered a fatal flaw with FSUIPC and PMDG. I finally realized that what was happening was that when the throttle is all the way to the back, that turns into reverse thrust. The middle is thrust 0. So I thought I'd pass that along for people, setup for reverse thrust is not needed as it is apparently automatic.
-
- 0 replies
- 643 views
-
-
Hi guys. Would appreciate some info on how you guys like to set up your sim just before you start flying. Would be most helpful. Don't over think each question. Just with what answer tends to be the way you prefer to fly. Thanks, Clutch
-
- 7 replies
- 1.2k views
-
-
-
Hi I am not sure if anyone else seems to have this problem, but when I am using the 1/2 VSYNC setting I am getting a flickering whilst changing views. I also get a stutter like a delay when I change views in high end a/c such as PMDG/AEROSOFT AIRBUS. Is their any way I can stop this or at least reduce it?. Regards Chris Harwood
-
- 5 replies
- 1.8k views
-
-
I was playing at my friends house, he had already bought the Metroliner but i wasn't sure about it so i decided to try it at his house. After flying over the North Sea we landed at EGUW. We hit the brakes hard, because some very good architect skills had been used here: I know ATC likes to watch planes land, but aren't they getting a little too close now? Why the hell is there a tower on the middle of the runway
-
- 5 replies
- 1.6k views
-
-
Can some expert please tell me why the SHADER_CACHE_PRIMED is set to 1693428480 in my fsx.cfg? I see some others have this setting and most have it set to 1. What does it do and why such a strange number? Prior to SP1 mine was set to 1. Thanks, regards, Bob.
-
- 5 replies
- 6.6k views
-
-
To celebrate ThanksGiving in America we are giving a 20% discount off all products and if you buy 2 or more you also get an extra 5% discount on top. Discounts are automatically applied at checkout. Discounts are valid between 13 November 2014 12pm(UTC) and 1 December 2014 12pm(UTC) Oban Airport Normally £15.99 +Vat Now £12.79+Vat Caernarfon Airport Normally £15.99 +Vat Now £12.79+Vat Catalina Airport Normally £15.99 +Vat Now £12.79+Vat Stornoway Airport Normally £15.99 +Vat Now £12.79+Vat Inverness Airport Normally £15.99 +Vat Now £12.79+Vat East Frisian Islands Normally £15.99 +Vat Now…
-
- 0 replies
- 1.3k views
-
-
Where can I get a Dusty Crophopper plane for FSX? Dusty is the star of the Disney Planes movie. My 3 year old will go bananas if he can actually fly Dusty. If not Dusty himself, can anyone suggest a similar looking plane in the Avsim library that would be "close enough"?
-
- 8 replies
- 9.4k views
-
-
I made sure both airports were set and checked the report and visibility was over 9000 meters, however each time I approach an airport my the weather outside drops to 0 visibility no matter what the weather is out side. If I keep forcing an update on the weather eventually I can make it go away, however it takes some time. Any assistance would be appreciated as this is frustrating. I am running FSX. LW
-
- 1 reply
- 759 views
-
-
From what I understand, the BBS A330 is flyable, but it is not without it's problems. I have been considering picking it up as the A330 is my favorite widebody and the Aerosoft A330/340 won't be available for another few years probably, but I would like to to what is wrong with the aircraft before I make the final jump to purchase it. Thanks in advance for your input!
-
- 8 replies
- 2.1k views
-
-
Looking for a Biz jet to buy. Any opinions on what one to buy? I was looking at Flight 1's Mustang or the Phenom 100. Any other ones that I should look at?
-
- 13 replies
- 2.8k views
-
-
I've had this problem for a long long time across all RealTime and FSUIPC versions. On a regular time update (perhaps the second or sometimes the third one into the beginning of the flight situation - by default it comes every 10th min) RealTime hangs up my FSX on the main computer with : "Loading air, land, and sea traffic..." I've just tried the latest version and it stopped at 4% Loading. I recall sometimes it stopped at a higher %, but I'm not sure though. Anybody has seen this? Thanks, Dirk.
-
- 8 replies
- 1.4k views
-
-
I have not checked DMM and yet I still get movement. Is there any way to disable it with Live Camera?
-
- 6 replies
- 1.4k views
-
-
I have FS Commander so, I do have some FSUIPC installed so that can communicate and I've been considering getting the full paid version of FSUIPC for better control/calibration and use of my yoke and pedals. If I do get the full version, will I have to go through an uninstall procedure of what FS Commander put in when I installed that?
-
- 30 replies
- 5.1k views
-
-
November 2014 already - we at the Ford Tri-Motor Project site are now into our 4th year of providing a plethora of "Low and Slow" historical renditions of aircraft, liveries and scenery via the http://www.ford-tri-motor.net web site. All downloads are FREE from the Ford Project Site - yes, that's right, everything has been FREE to the simming community since the inception of the Project. No hidden cost, no membership fees, no restricted access or speed - everything on the site gifted to simmers all over the world. The Ford Tri-Motor Project was conceived by Edward Moore way back in February 2011 when he wanted just a few Ford Tri-Motor repaints created that h…
-
- 7 replies
- 1.8k views
-
-
Folks I've had a go at flying from FBs PHX to DEN in both the NGX and AS A319. OOM'ed on downwind both times. Not overly surprised really, but has anyone else tried and succeeded? ASN with four cloud layers. Mid range autogen. Obviously I can crank down settings, but I'd rather not. Cheers Mike
-
- 8 replies
- 1.7k views
-
-
Hello. It looks like some new AI models were released today for Frontier Airlines aircraft. But, I don't see any flight plans in the library for Frontier for FSX? Does anyone know if there are any? Thanks!
-
- 7 replies
- 1.8k views
-
-
-
I never know for sure if the autopilot in the Lear 45 in FSX is going to maintain the heading, altitude, and speed I set... sometimes it does all three just fine and dandy then sometimes it will simply have it's own mind on one or all three! It's a little disconcerting to set the altitude to 12,000 and suddenly see the aircraft nose dive for the surface or point to the sun at high noon or to have it leave the course I was steering to go 180 degrees from it when the AP is enabled. Speed seems to be a bit more tame but still sometimes has a mind of it's own... more than once it has gone from a nice sedate cruising speed of 200K to well over 350 and headed for mach 1...…
-
- 3 replies
- 1.1k views
-
-
if anyone have 2 GPUs, did you try new FSX SLI profile in NVIDIA control panel? http://www.nvidia.in/object/sli-technology-games-in.html There are 2 profiles: Flight Simulator X and Microsoft Flight Simulator X ??? What's the difference? Will this raise FPS or not? Sorry, wrong forum. Should be in HW. How to remove?
-
- 0 replies
- 1.3k views
-
-
I'm not usually into Airbuses, but I recently saw the A340 for the first time in real life and was impressed by its size and graceful lines. I've searched the web for a good FSX version, but I can only find older versions. One from CLS, one from Wilco. I have very little experience with either company. Is any of these good? Or is there anything else in progress?
-
- 5 replies
- 2.3k views
-
-
hi guys can someone check something for me with airac 1411 please i did a flight to eggd bristol to bikf iceland the active was 11 at bikf i use efb for flight planning when i go to choose a arrival runway it only shows 02 :huh: but in the approach box it shows all runways same for jersey egjj it shows up as 08-26 not 09-27 i reloaded the old airac 1410 and it shows 09-27 so im hoping that its an airac cock up iv tried changing the runways using efb runway editor but no joy the airac seems to be missing :( some approaches and departures from jersey egjj and bikf,but if someone can check on theirs planner that would be great thanks in advance gary.
-
- 1 reply
- 737 views
-