MS FSX | FSX-SE Forum
Subforums
96377 topics in this forum
-
Hello Gang!I have had the pleasure of test driving Frolov's wonderful Dash-8 and I have to say that he has created one of the most wonderful freeware addons to date in the Flight Simulator series. Yes, the airplane at the moment has no liveries and looks like it just came out of the factory, but the flight model, the sounds, the handling, and the panel, are second to none. I have e-mailed Mr. Frolov with some of my initial observations in hopes that it helps him fine tune this beauty and make it the most awesome addon. Below are my observations for those that would like to concur and perhaps add.1. The sounds are magnificent. One problem is that the sounds come u…
-
Am wondering if it is possible of clear up (either partially or completely) the smokey or tinted effect some designers place on the vc forward and side views. I'm thinking of the Gforce Cessna 150H and some Ercoupes among others, where the attempt for a greater realism may cloud side views a little too much. Is there an editable line in either the aircraft.cfg or panel.cfg files that controls the extent of tinting or smokey effect or is this effect incorporated in a .bmp file? Hope someone can clear up this issue! Thanks.Richard Ball
-
Hello,I have had problems with PAI's autoinstallers. Is there anyway for me to get all the aircraft config files without using the autoinstallers?.I have manually installed all of the PAI aircraft textures. What i am looking for is the aircraft.cfg file which contains all the setups for the different textures._________________________________________________________________________EXAMPLE:title=PAI B737 SWAsim=Project Ai 737-700model=panel=sound=texture=SWAatc_id=atc_airline=SOUTHWESTatc_flight_number=ui_manufacturer=Project Aiui_type=Boeing 737-700ui_variation=Southwest Airlinesdescription=Project Ai B737-700 Only for use with Ai Traffic!_________________________________…
-
After planning an IFR flight between O'Hare and the Quad Cities airport, I get the following error while loading the flight.Unable to load flight plan.Then, to be sure, after the flight loads and I am sitting at the terminal, I check the GPS to make sure and no flight plan loaded. I then end the flight and get this error message.Unable to unload flight plan.I have deleted the plan directly from the myflights directory, then try to recreate the plan and still get the same error.Now, when I reverse the flight plan and fly from Quad Cities to ORD, I have no issue. Same with planning and flying any other flight to/from ORD.Any ideas??
-
Would someone tell me where I can obtain this program, please.
-
-
Hello Guys!Since I had to delete my old FS2002.cfg, I have lost an argument to constantly remove the red text lines, just as "brakes", zoom level and so on...I know there has been a simple line, but does abybody remind it?Thanks for your comment!Alexos
-
Hi everyone,I am having problems with FS2K2 and vertical speed indication. On all my aircraft including the default ones I am not getting the correct VSI relitive to actual vertical speed. For example when I use say the 737 I rotate, gear up, set AP on then I usually set a climb rate of 2000fpm on the vsi. When I hit the VS on the autopilot the jet just pitches up and up until it stalls, the ias is fine as I am well inside the envelope for a vs of 2000fpm. If I reduce the vsi to say 300fpm the jet will climb (slowly). The vertical speed indicator is not showing what the aircraft is actually doing. Last night I deleted the FS2K2 config file and restarted again so it c…
-
- 1 reply
- 810 views
-
-
Well it works for me! Basically I do the old windows mode trick everyone else has tried, but I was annoyed with the windows title bar. So I just got rid of it by re-sizing my monitor screen until the bar dissappeared off the top! A bit of a pain to reset it each time I enter or leave Flight Simulator but worth it for the reflective textures. You can even see clouds reflecting off the wing. :)Also of note was I found that every time I switched views I would have to do the windows mode trick again so as to get the reflections back. What a pain in the afterburner. :( I did a bit of research and modified the display.cfg file in the main 2002 simulator folder. Firstly I…
-
Guys,I'm repainting a Concorde in British Airways Union Flag colours and have a small problem with a texture which is covering the visor bay when the visor is down, this means I cannot view the visor in it's down possition from out side the aircraft. I have seen this texture removed on a previous repaint. Attemps to contact it's author have been unsuccessful. I hope some of you may be able to assist me. Check the visor bay area on the picture below.http://flightcraft.avsim.net/Screenshots/ConcordeFive.jpgBest Regards,Adam NardoneFlightCraft
-
Hello everyone, I've had my eye on IL-2 Sturmovik for a few weeks now. I'd like to know everyone's opinion on this sim. Thank you. Earl
-
I have never used any AI traffic tools to enable my 3rd party aircraft (ie POSKY 767, 747, PSS A320, F1 Cessna 421C) to work as AI aircraft.What is the best tool out there to accomplish that (payware or freeware)?Thank you in advance,Kerke (KMIA)---
-
I am Sorry to my Visitors who I am sure are mainly From Avsim Forums:) that My Website has been closed today.This is because it has exceeded its monthly bandwidth limit and has been disabled until the end of the month. On 01/09/2002, this site will again be available.This is bad news and good news :It is good that so many visited me (2000 people every week !)and sent me nice comments and it is good I will have a little holiday from maintaining it, and good that while it is closed I can do some new Artwork and Make the Site Even nicer when it returns.I just hope the bad news that people Forget to go back when it reopens does not come true Big Thankyou to all who visit me …
-
- 9 replies
- 1.4k views
-
-
For some reason I am not getting any of the usual red text in the bottom left corner of the screen (ie, BRAKES, etc).. I do get the red text at the top if I use "shift + Z" to view FPS. Anyone know what might be wrong? Thanks!!John-PaulToronto
-
- 1 reply
- 499 views
-
-
Attempting to fly an Air BC Dash 8 with the new panel today but I can't read the guages or writing at all! Is there a better way to view the guages on the panel? Andrew Heath[a href=http://www.duncanfuller.com/d21tracon/]Detroit TRACON[/a]THE RED WINGS RULE!http://www.duncanfuller.com/d21tracon/banner1.jpghttp://www.duncanfuller.com/d21tracon/banner2.jpg
-
Hi,Can anyone please tell me how the frame lock works? I have it set to 25, and if I understand correctly that means the frame rate should always stay around 25 - but is doesn't! So what is the point behind the frame lock? And how come you can't turn it off?Does anyone know?Keith
-
I just downloaded the new Dash 8 and was wondering if anybody else noticed that it appears to be the MSFS2002 Dash 8 model with a stretched fuselage. The front portion looks exactly the same as the default model.....Is it the same (except for a few model changes)?And if it is, isn't violation of copyright to release it as your own model that you "modified"?Thanks!Shane
-
Am jealous, i admit it, am jealous. I go to the screenshoot forum, take a look at the picks and see airports full of planes, full of those little trucks that carry the food, and trucks that fill the planes with fuel, i want my FS2002 looking like that. Problem is i dont know how.Now i understand how to add planes that can be flown by me, i've also added AI planes from Project AI. What i dont see in my FS2002 is the business i see in the screenshots, mine just seems really sparse. Where do i go? Do i need to purchase add-on's? Can i download from the internet? Here some examples of what am after[http://ftp.avsim.com/dcforum/User_files/3d6bb6896bc4dd1e.jpg][http://ftp.avsim…
-
- 4 replies
- 1k views
-
-
I was looking through my aircraft file & I noticed a lack of add-on panels w/ my downloaded a/c. Can anyone suggest some freeware add-on panels to me? I'm looking for panels for the following models:757/767-200/300747-200MD-80 series (I know about Paul Golding's panel, but I have a 28.8k connection & am hesitant to download it. If anyone can send it over AIM that would be awesome. I get faster transfer times over AIM)Thanks everyone!
-
Hi to all when I click to fly now it crashes :-grr and it gives me atc.dll module. Could someone plz email me their atc.dll mine is date 9/19/02 size 233kb thanks :-wave . Eric :-beerchug [email protected]
-
I know that the G-73T isn't too far off, but while we're waiting for it, and I haven't seen any repaints of the original, I have a couple suggestions for some awesome repaints (even though they are mainly modifications of the same airline):Chalk's:http://www.airliners.net/open.file/109388/L/http://www.airliners.net/open.file/061120/L/http://www.airliners.net/open.file/210644/L/(I know that the last 2 are turbopropped, but I remember seeing some piston-engined 'yellowbirds' and of the older (pictured) 1987 colours.West Coast Air:http://www.airliners.net/open.file/111629/L/http://www.airliners.net/open.file/111628/L/Air BC (BC Airlines):http://www.airliners.net/open.file/10…
-
- 0 replies
- 589 views
-
-
Hi All,Though Mike may now be having a break from the building tasks his aircraft are still very popular and requests keep flowing through. The latest two releases from me for texturing his aircraft are:An RJ85 for a Personal Request from Ralph:http://www.gjsmith.com/images/Husker-Air-2.jpgAnd the release of a texture for young Ben for his little VA he is trying to make:http://www.gjsmith.com/images/AT-7.jpgBoth of these textures are available through:http://www.gjsmith.com/textures/by-type.htmIt seems like it was just the other day I was posting to the forums saying "almost" 200 free textures available at my site but with a tally done today I discovered there is now 229…
-
I have posted a poll asking users what screen resolution they use when on the internet. If you haven't viewed this poll yet, please go to the Hangar Chat forum here:http://ftp.avsim.com/dcforum/DCForumID6/859.htmlI realized after starting this poll that I didn't have all the resolutions out there being used and it doesn't account for users that use more than one resolution. If you fall into one of the above categories, please just answer with the resolution you use most often if you use several. And if your resolution isn't listed, just select the closest lower resolution that what you are using.Thanks for your participation.
-
Hello,Anyone has info about how to edit the aircraft.cfg, item by item, I
-
My goodness it is true. I have been up 5 times or so since doing this and it has breathed new life into this P3 1GHz w/ 512 PC103 ram, Radeon 64 DDR VIVO. I am truly amazed as I am running this at 1600 x 1200 x 32 and it really is totally smooth. Seems the AGP disable in DirectX was the thing that seems to have gotten rid of microstutters, or at least 95% of them. I am building a new machine but this clearly tells me there is not so much hurry anymore. Now my lovely Lian Li PC-68 case modified with RheoBus Version 2 and subfloor cooling will sit empty save the nice Yamaha CDRW and Toshiba 16x DVD player I already installed. I am running everything maxed except for t…
-
- 51 replies
- 5.6k views
-