MS FSX | FSX-SE Forum

quote; " ACTIVE 3D COCKPIT: EXCLUSIVE!Enabling armchair pilots to control the aircraft directly from FS2002's virtual cockpit without switching to a 2D flat panel. Pan and zoom around the flight deck to your heart's content, then click any button or switch to activate the autopilot, grab the throttle, access the FMGC, or perform any other operation right from the 3D view. It's the way to really fly - virtually. "However, I remember reading something about clicking on buttons brought up 2D panels, like in the picture below. http://www.wilcopub.com/nonfls/img/A320_1lg.jpgAnyone got any info? Is this product not going to kill my frames? Heard the release of the download vers…

I realize I'm an occasional lurker here, but has anyone got a status report on Taxiwaysigns.com? I haven't seen any new work from them in months and was just curious. Hopefully they're still in business, they do fabulous work.

I will start by showing you a picture of what im trying to fixthe p-51 was taken yesterday and the crj today. I was messing in the fs2002.cfg under the scenery section so that may be it.http://members.shaw.ca/evan.lask/help.jpgIn the before shot you can see that the scenery at distance looks ok, Its fairly sharp and still retains some of its quality..Now in the after shot notice the scenery at distance gets very pixelated.. When I view it it almost looks like lots of squares.If you can see what I am saying Id apretiate the help.. ThanksEvan

does anyone know where i can download a panel which will have all the callouts from 2500' to touchdown with also the callout approaching minimums?i used to have it a while back with a particular panel i downloaded but i dont know which one it wasthx

Hi all,I've been seriously considering ditching my thrustmaster throttle/joystick and going with a CH Yoke/Pedals combo. Since I've gotten so used to using a real throttle handle for so many years, I'm probably going to get a CH Throttle or similar too. Now all of these items add up to 3 USB cables which would be taking up alot of valuable ports. I've seen some discussion about connecting the yoke to the pedals. Is this accurate (ie: connecting the two so just one can be plugged in)? Anyone know if this also applies to the CH Throttle too?Also, can one of the rocker switches on the yoke be mapped to the elevator trim? I've heard that FS doesn't like that.Thanks in a…

Just installed XP Home and have an interesting glitch. Planes now default to VC cockpit view instead of 2D mode. Any way in FS to change the default panel view?

I finally made a really cool trim wheel for my home cockpit but I find I have trouble using the AP altitude select now. For some reason the wheel seems to "take over" and the plane won't level out at the right altitude. Has anyone else seen this and/or found a way around it? Thanks!David

Hey Gang!I am experiencing a particular problem. Every once in a while I get a "Scenery Library Object not Found" error message. At first, it was thought that my "scenery_fs_props.bgl" file, found under the SceneryDB/Props/Scenery folder was corrupted. I extracted the file from the original CD's and re-installed it and I am still experiencing the problem. I have been observing, however, that it only happens in areas where the Mooney AI aircraft is present, and especially when I turn the view to look at it.Any ideas out there on how to fix my problem? Thanks in advance folks.Sincerely,Dennis D. Mullert

Just some observations I noted running FS2002 on my beefed up system.System Benchmark:CPU: Pentium III 866MHzMotherboard: DFI CA64-TCRAM: 1.25GB SDRAM PC133Graphics Card: MSI G4MX440Hard Drives: Western Digital 30GB 7200rpm Fireball 20GB 5400rpmMonitor: Gateway EV700OS: Windows XP Homenotes:first note about running fs on this system is frame rates had all sliders to max and display on max settings and encountered steady performace at 17FPS (no reason to believe it won't run any smoother at 17+FPS if i turned it up).Encounter serious slowdowns at the airports or wherever AI traffic showed in large numbers. FPS averaged about 6FPS.Encountered serious slowdowns f…

Does anyone know where I can get the default cloud textures.. I want them back but I dont want to reinstalll flightsim

Just did a nice flight from CYVR to KPDX in DF734. Nice approach through the mountains but when I tried the ILS approach to 28L(IJMJ)110.50 the localizer in the plane did not seem to line up with the runway plus the g/s was way off. Has anyone else experienced this?Thanks, Adam :-)

Hello all...It has been such a long time to this forum that Im sure no one remembers me, or maybe even this quote that was always used, but if there are any people here that remember it, please either email it to me or post the reply here.It went something like: "Experiance is a hard teacher. First comes the *blank* and then the lesson."What is the correct quote?thanks again,Eric TKJAX

Well for all of you KPDX FBO pilots someone finally took charge of the blatent error of our great freinds at MSLOP in regaurds to the missaligned ILS 28L and fixed the bloody thing......My Hat is off today to Mr.John Kramer he has joined Mr Page Cline as a great hero in the flightsimming community, there contributions return the fun back to this lifestyle.This file can be found in the WHATS NEW section of AVSIMs Library.Here's a screeny for ya.........Thanks Johnhttp://www.flightsimnetwork.com/dcforum/Us...9d503cc53ab.jpg

Yeah, I bet everyone knows what I'm talking about. I first started getting it in Matthias' Rj85 panel and now the Dash-7. can someone please tell me how to put that damn anoying and extremely sensitive GPWS in my recycling bin. It must be a module or something ...please help,.cheers, panther

I used to have this website in my favourites - but lost it!! Now I have it again -- it is invaluable to keep your startup menu absolutely clean to save resources for FS2002. http://www.pacs-portal.co.uk/startup_pages...rtup_full.htm#NIf you don't know what I am talking about, read the website.If you still don't understand what I am talking about, then it would be wise for you to forget it . :0Barry

Hi everyone...I usually set 1500 on the ground and going up from 1000ft to 6000 at 18000ft. However, Since getting 2.9 thse visibilty doesn't seem to change as I get higher.I tried different settings but no change... Any Ideas?:-)Pete

Hi All,I was just wondering if anyone else is seeing this problem with the Dash-8.Enroute to KRNO from KSAN between PDZ and EHF. I am supposed to track R-126 inbound EHF. The HSI is lined up but the ap is commanding a track of almost 270 for intercept. I find the Dash 8 tries to turn very early for intercept taking you on a wild zig zag. Anyone else see this? Is there a fix?MarkFollow up:I was writing this as I was flying. I went back into the sim and find my ac on a track of 120 doing circles when Vor Nav is showing as active and the course selector is set to EHF R-126????????

Does anyone know if these is a scenery package for Catalina Island located about 1 hour off the coast of Los Angeles?Cheers,MothEGLL

I was wondering how different the 757 sounds with the Pratt Whitney 2037 type engines vs. the RR RB211-535E4 type turbofan sounds inside the cabin and outside as well. For the Project Airbus A320 I am using the CFM sounds since there isn't any IAE sounds yet, but how different are these sounds comparing the two?1. Where can I find the sounds for the 757 using the RR?2. Where can I find the sounds for the MD-80 variants with the JTAD-200 series turbofans from Pratt Whitney?Any info on this would be helpfulThank You,

Hi now that Posky has released their CRJ-200 i was Wondering if Someone can make a Repaint of a CRJ in Alitalia Colors?

Sorry fellows but this is driving mad (be a hatter soon!!):-newburnI am able to start the Dash 8 engines only by using Ctrl+Shift+F4 ONLY in version 1.I have tried over and over following the Sample flight but when I get to the moving the cursor above the right condition switch I get the hand and a + sign but nothing happens when I click the mouse???At least I am able to fly with version 1 and might I add what a pleasure it is, super in fact. I am able to take off and land (using auto pilot for the landing) very well but things did go a bit pear-shaped when we touched down!!!!!!!However now with Version 2 I am not able to start the engine AT ALL which is a great dissapoin…

I am trying to reinstall the ProjectAI traffic after installing a new harddrive (ugh!) but I still have so many of the stock planes (Orbit, Emerald, etc) that the real flights rarely show up. I used to use FSTrafficedit to alter the files (ie. take out the stock planes) but for some reason that program doesn't seem to like the flightplans created by the latest Ttools. It will read the aircraft and airport files but crashes with the flightplan files. What would you guys recommend instead? Thanks!David

HiCan someone help me plsI have a 7 overlay at EGLL but what do I need to check to stop 2 ai going to same gate? Which txt causes this the AFCAD file or flightplanNo aircraft or flightplans are duplicated and the egllaircraft.bgl is moved to remove static a/cThx Sun

Hi,First, is it so that the CSI MD-11 is the only thinkable MD-11 model to use in FS2002 ?Second, has anyone made better, FS2002-style lights to the CSI model (or some other quality model) ? The default FS2000 lights look just awful, like white and red tennis balls glued into the tip of the wing... yuck.Information very much appreciated, as usual.regards,Tero

Hi Folks,Once again we are blessed with a truly great scenery add on (freeware by the way). Malpensa (Italy) is a work of art. Extremely good buildings, taxiways, statics, and an innovative de-iceing area.Night lighting is beautiful.Many thanks to the developers at ISD project.Download from this site: http://www.isdproject.com/The site is in Italian and English.Have fun,Howard