MS FSX | FSX-SE Forum

I searched here at work for a posible fix to my sound problems with WinXP, and this should hopefully fix it!It's called the PCI Latency Patch.This only applies to VIA chipsets.http://www.tecchannel.de/hardware/817/8.htmlI am at work, so I can't test it, will wait for tonight and see if it works. If anybody has used this fix, how does it work?Tony in Miami

Bill Lyons has included replacement road textures with the new Swift.I hope a small pic is OK here, but I knew everyone would want to see what they look like. Big, big improvement over the default and Bill just added them along with a Jeep, an airport and 4 planes, all for $12.50!http://windrfters.com/Thanks Bill

hi everyone looking to see if there is anyone out there who would like to help in putting together and running or taking part in a flightsim site that supports and provides info and resourses on canada in the world of flightsim if intrested please email mehave a great dayshane

Hey all.Just went over the edge and started flying Oleksiy Frolov's Dash-8. Well, suffice it to say that the other models I've flown pale in comparison. I routinely fly Windsor-Toronto, Canada and would love to see an Air Canada Jazz repaint for this bird. Red, orange, green, yellow I don't care.I don't see a lot of repaints out there for this aircraft. Are there restrictions placed on this by the author? Is it too difficult? I only ask for help because my talents are limited in the painting department.Thanks in advance,GlennWindsor, CANADA

Bills latest Custom Classic is another winner!Swift, "the poor man's p51", is his latest creation and like all of his previous releases is a real beauty. You get 4 versions of the plane, a great VC panel, sounds and exclusively customized goodies. Well worth the measly $12.50 Check it out on Bill's website http://windrfters.com/SWpage.htmPete S

A friend and I are taking a car trip from Virginia to Omaha, Nebraska. We'll be leaving on Saturday, February 1. Our route will take us across Virginia State, through the south end of West Virginia, through parts of Kentucky; to St. Louis, Kansas City and into Omaha.The favor? I'd appreciate hearing from anyone who lives along the way regarding the weather we might encounter....... or at least what the weather is USUALLY like during this time of year. I'm going to Omaha to help my mom celebrate her 89th birthday. We haven't seen each other in a while, and it's gonna be a surprise!Thanks in advance.-Lindy :-wave

the page is full of them, but if you scroll down to the bottom you will 2 different versions of the P3 - Chinese aircraft collision, One US and the other Chinese.kind of funhttp://paris.janes.com/videos.shtml

How effective is shared video memory? I saw a HP 2.4 Pent4, 512 DDR ram, with up to 64 mgs of ram used as video memory. Would that give good results or must you have a separate video card? Will HPs take a video card? Thanks...Roger

I am using the DF737 panel and because the FS2K2 shortcut for TOGA does not work properly with the panel, I would like to create a 'click spot' over the TOGA button on the panel and assign it to a button. Does anyone know how to do this?? Thanks.Boyd BarkerSenior Command CaptainKBOS Hub ManagerWestWind Airlineshttp://home.houston.rr.com/checklist/DFexperience.jpghttp://home.houston.rr.com/checklist/checklist.htmlMy DF737 Around the World Adventure: http://home.houston.rr.com/checklist/aroundtheworld.html

Does any1 know of a good like tutorial for this to find out how to use it in a general manners uch as paint an aircraft???????

I recently purchased the GeForce4 MX400 Video card. However, the "NVidia installation driver" with the card is the 40.72.Does anybody know how I can install the 30.82 drivers (GOING BACKWARDS IN SERIES). When I try to install the 30.82 it won't detect the card.I have had flawless experience with the 30.82 and as far as I know, they are the only ones that are 100% Microsoft certified.Any help anywhere?Thanks Darryl

Hi Simmers,This forum post is to announce that a GJSmith.com Encouragement Award has been presented to Vern Opperman for his MelJet B777 GE engined Royal Canadian Airforce Livery.http://www.gjsmith.com/images/Award--ENCOURAGEMENT-small.gifThis excellent texture was one of Vern's first for an FS2002 aircraft and has demonstrated a considerable amount of effort in the primary graphics and a maturing understanding of the Alpha channel reflective effects, and he has gifted this hard work to the Flight Sim Community for our flying pleasure.Please see the commendations for Vern at:http://www.gjsmith.com/awards/awards.htm and navigate to the [blue]Encouragement Awards[/blue] pag…

In my never ending quest to make keystrokes work with addon payware aircraft, RC ver3 and MSFS2k2 ATC, I tried to set the radios via the dialog box. Here is as far as I got, its late here and I am tired, please tell me what I am not seeing??...okeyhttp://ftp.avsim.com/dcforum/User_files/3e30e252254e5c8a.jpg..dokey DOH!!!http://ftp.avsim.com/dcforum/User_files/3e30e239245f3043.jpg

I have a GeForece 4 Card and the NVidia drivers that come with the cardare 40.72. I wish to use the 30.82 drivers but when i go to install it itwon't detect the card. How can I go "backward: on a driver like this?Any help anywhere?ThanksDarryl

I have a GeForce 4 with Win98SE.When I go to install the NVidia 30.82 driver I get this error message."Unable to locate detected devices PCI ID in INVAML.INF."Then the installation closes and I am back to nothing.Any help??Darryl

Hello guys,A computer technitian told me that he read somewhere that if we run FS2002 for long periods like 4 hours consecutively (sometimes I find this short), we can diminish the life expectancy of the CPU considerably.What about it guys, anyone, please?Flatspin_Fumble

I AM SURE THIS HAS BEEN DISCUSSED BEFORE, BUT IS THERE A WAY TO INCREASE THE RANGE OF LOW ALTITUDE VORS IN FLTSIM 2002. SOME LOW ALTITUDE VORS'S, SUCH AS ARMEL AT DULLES (IAD) DEFINE JET AIRWAYS AND THE RANGE OF THE VOR QUITS BEFORE RECEIVING THE NEXT VOR ON THE JET ROUTE. THANKS IN ADVANCE.

Hi all. I purchased the Dash 8-300 awhile back but recently have uninstalled the product. I tried to go onto their site but the page cannot be found. Can somebody try to go onto this site to see if it works. Could you please send me a live link to the site if it works. Or does anybody know why the site is down and for how [email protected]

I am making an MD-11F using FSDS 2, and I've setup a website where you can track its progress. I update it nearly daily. The address is http://www.thescorned.homestead.com/md11.htmlThere is also a message board that you can visit to ask me questions or make comments. From the page above you can reach the board by clicking on the prominent button. Thanks!-Albaro Villegas

Can someone tell me when I hit "print screen" button on keyboard where can I then find screenshot (pic)(in which sub/folder).I use Win XP Home.I know this is a stupid question but can someone help me please.Thanks.

After reading this forum the other night a user wrote,

I have a GeForece 4 Card and the NVidia drivers that come with the cardare 40.72. I wish to use the 30.82 drivers but when i go to install it itwon't detect the card. How can I go "backward: on a driver like this?Any help anywhere?ThanksDarryl

I was wondering if anyone has encountered this problem with Air Traffic Control. I have loaded a couple of flights lately, one leaving Salt Lake International, the other leaving San Diego Lindbergh. Soon after takeoff when I am supposed to transition to a certain departure frequency, I am not able to transition to it. What I have had to do was go back to the tower frequency, then go to transition to class D airspace. Once I do this, and then clear the airspace, I am able to transition to the departure frequency, and everything seems normal for the rest of the flight. If I do not do this I will not have any contact with ATC for the rest of my flight, until I ask for cleara…

Microsoft should be announcing FS2k4 some time soon, does anyone know in what month 2k2 was announced back in 2001..? Thanks.

The fun part is not only can this be used in a real plane-but also can be used with fs2002 with Peter Dowson's gpsout utility!http://members.directvinternet.com/geof43/Multi/multi.htmlhttp://mywebpages.comcast.net/geofa/pages/Geofdog2.jpg