MS FSX | FSX-SE Forum

HiThis fighter has no NAV/VOR or and ADF!!! Am I missing gauges?Has anyone else d/load & checked it out.Anyway this Typhoon flies like a dream! except for the nav.

Hi allI'm using a X-36 Saitek joystick with the elevator trim assigned to one of the rotaries.Say, if I decided to takeoff and climb manually, trimming the elevators to suit a constant climb, then i decide to allow the Autopilot to climb the rest at the current attitude.During this time of switching Autopilot on and on a postive rate of climb, I haven't centred the rotary, leaving the elevator trim in the positive position - as when flying manually. I noticed during the climb the trimmer wheel is constantly moving about, from what looks like it's having to match trim to suit my rotary position ie. positive. In this position, the trimmer can't seem to settle down to a corr…

I'm getting as excited as others when I see the wonderful screenshots posted from the press copies of FS Century of Flight. At the same time, I think about my collection of freeware and payware add-ons that make FS2002 so much fun and how they will work in FS2004. Many of my add-ons rely on the genius of Peter Dowson and his FSUIPC module. So it's going to be very important for Peter to release a FS2004-compatible version of FSUIPC. Of course, the sooner, the better! :-smile12 If you also have add-ons that rely on FSUIPC, you may want to consider donating to Peter and supporting his efforts to upgrade FSUIPC to work with FS2004 and well beyond.I don't want to start a deba…

I have seen some of the screenshots of the detailed airports like SEATAC, Miami, JFK...I was wondering what the list of detailed airports are. Anyone know.1811

i was cleaning up my computer to free up space. and then i clicked to defragment on the control panel. and before it finsihed, i think it was like at 1%, i cancelled it. first i did analyze. after i cancelled i turned on Day of defeat and it laged alot. then i turned on FS2002 and it lagged alot. i was getting 2 fpm at KORD with the PA A320 merged with the PSS panel and sounds. i also chose the clean up disk space and cancceled it before it finished. what does defraging do? do i have to uninstall FS2002? can someone help me out?adam

Well, I think I may be on to something as far as flying this a/c. Here's what has been working for me and really seems to make the aircraft flyable. I set takeoff trim to the first line below the center. This is also with a full tank of gas. For the people who zig zag down the runway apply the throttle SLOWLY and smoothly, you'll run right down the centerline. With the takeoff trim set apply alittle back pressure on the stick at about 85 knots and it will smoothly and gently leave the ground. Nice. Now for the big stuff. As for leveling off make SMALL adjustments with the throttle and when using the trim just make ONE adjustment at a time. WAIT for that one adjustment to …

I have seen some of the screenshots of the detailed airports like SEATAC, Miami, JFK...I was wondering what the list of detailed airports are. Anyone know.1811

Hi,Maybe a foolish question, but, my pilots in the cockpit don't have any textures. Even when I installed the base textures of BWIA. Also I do not see any interior textures. Did I do something wrong when I installed these excellent planes?Regards,JeroenThe Netherlands

Whenever I fly and I either open the SquawkBox program to ATC and such or if I open FS Navigator, my screen turns white. Then about 30 seconds later it will turn back to blue. I have the latest version of FSUIPC and I even have the apply whiteout fix, box checked. It gets old quite fast and I was wondering if anyone out there knew of anything else I could do to fix this.

GUYS!!! Specially you Peter "Jetpilot"To all of the fans of "PerfectFlight Fly B717", a great great news: there is already a great patch for theire incredible package!!!Now you can edit the view spot!!! Great Hum?And a new gauge, hum?Of course, there is a problem: they can't fixed the lack of the FMC... But, see the good side: they are improving!!!!.....give me a break!!!Cheers,Miguel

Can someone confirm that he is getting echoes on the TCAS when using DF737, PSS3xx or JL2/4 in multiplayer with SB on a second PC and runnin AiBridge. I really need to know since I been tearing my hair off to get it to work. When SB is on the same PC as FS it works perfect but not with SB on second PC running through WideFS. Went over to a friend and got the same result with his gear.I also been corresponding with Jos

Hi I just purchased Ready for pushback. It looks great, but I have a small problem.

can any of the testers tell us what Fs2004 looks like at night? Are airports lit up with flood lights? how are the roads, city glow, etc... Just wondering if they improved how night flight looks.mark- insert your favorite quote from the movie Airplane -

Is there a merge kit much like Lee Hetheringtons PIC/POSKY merge available.I am trying to get the A330 and the PSS Panel to fuction together and not having any luck.Thanks for the help

Hi All,I've read several posts that suggest frame rates would increase absent the inclusion of the VC feature. If so, is there a practical method for disabling the VC feature in sims :-hmmmJack

There's a nice litte R22 in the library for you rotor-heads. Nice job and thanks to the author Gilles Arlove.

Could some nice fellow help me find a good A332 Austrian airlines for use as AI.ThomasESNN

Hi,Any of you have some nice vortices or smoke effect (and there line code.....) for the excellent FFX738?It is such a gret airplane. I really like Mike's AA livery.... BEst regards Minos

I have just downloaded and installed the EW ATR. In FS2002, I can see the plane, but when I try and load the plane I get "Invalid license". Anybody have a solution, because the planes are not flyable as is. I am surprised that this was not caught before they starting selling the ATR on the aerosoft site.

Hi Pls see screenshot, I'm *trying* to use Paul Mainville's DTW scenery but it seems to have been giving me some problems with the interaction with the default DTW scenery.I've tried all sorts of scenery library configurations - changing layers etc but without success.Can anyone offer any advice?Cheers

Normally, my reactions to FS2004 screenshots have been kept inside... The first picture in this set made me verbally blurt out a holy "shiznit" when I saw it.http://edirectamerica.com/fs04/utfs04/Edit: There's a first set as well... (Including Princess Juliana!)http://edirectamerica.com/fs04/index.htmEdit #2 : I just noticed this was already linked on what is currently page 2 of the forums under the thread "FS2004 Screenshots at FS Gateway". Sorry Siggy for reposting your find!

Hi Chicago (KORD) Simmers,This Dutch Flight-simmer is going to Chicago next week for a congress, but can hopefully / probably spent an afternoon or evening to places of interest for simmers.Please advise me about interesting "simmers places" and how reach them. Where is a big computer store ? Are there spotters places at O'Hare ?Oh, I know, Merill C. Meighs is one of them .....Hessel Oosten, The Netherlands.

I don't understand this: I have made a picture-perfect approach just like I have done zillions before, no wind, touched down just at the perfect spot on the runway - and then this bird simply "sinks" in the ground, i.e. the rear wheels "eat" themselves into the concrete, making plenty of noise and firy and flashy flames (and thus the plane unsteerable)... why?? I have tried it with several of the POSKY 744Fs (Cargolux, Air France), at several airports, always the same problem.Anyone can help? Is the plane badly loaded, i.e. too much weight on the centre of the plane? If yes, can I influence this? Other reasons?

Which SimFlyers airports have the "amarda" (sp?) that services the aircraft upon landing and dialling in the correct freqencies to activate? I also seeme to have lost the URL for them, if anyone has it.Thanks,Bruce.

Has anyone experienced an appreciable amount of improvement by using Intels' new Hyper-threading Technology while using Flight Simulator running on Windows XP?Again, has anyone experienced improvement of using Intels' on-board Extreme Graphics.Thinking about upgrading Thanks for any feedback.jim in NM