MS FSX | FSX-SE Forum

Can anybody advise me how to use the auto pilot in the Mil 26 Helicopter as all of the markings are written in RussianCheers Semm

I fly regularly into Teterboro and in the RealWorld if the weather is better than 1000 and 5 the VOR-A approach with circle to land is almost always used. This brings arrivals in from the west, which avoids conflicts with traffic from EWR, LGA and HPN.In FS2004, however, ATC will tend to provide a straight in approach to the favored runway ... even if the weather is clear-and-a-million.Is there any way in FS2004 to create or change a default or preferred approach for an airport?Thanks!

Is there a standard procedure for converting existing MSFS aircraft into low frame grabbing AI aircraft?I finally figured out how to make TTools and the AI flightplans work and now requiere appropriate aircraft to fly in and out of assorted military fields.Specifically looking for a a couple fighter planes for T&G's and assorted transports in AI format.Thanks. Any help aprreciated.

Hello FS folks,Could anyone help me: After too many problems with the FS9 I have opted to get back to the old nice FS2002. These days I need to check out some data about one of my planes and I can not open the FSEDIT program. Does anyone know what it happens and what to do to solve this issue? FSEdit has any limitations about the number of aircrafts installed in the FS2002Aircraft folder? Let me know please!Obs: Everything from the simulator it works fine!Thanks waldemar

Has anyone out there got / had an annoying static overlay sound with some 3rd part addons? It seems to be on a loop & comes and goes in a wave, but engine sounds can be heard behind it.eg- I downloaded an A320 with it's own panel and default sound (737-400) and the problem was there,It seems to be panel based, as it has also happened with various panels on various 3rd party planes. The problem seems to isolated to jets, and not all addons cause a problem. It makes no difference if the plane is using default or addon sound files eg PA CFM56 sounds.The default planes all sound ok.Any help would be gratefully received as this didn't happen in FS2k2!CheersPaull

I'm almost finished with Chuck Yeager's autobiography. What a story! I highly recommend it.I was perusing the 2004 Aircraft section and found a Hellenic CL-13/F-86E (repaint by Nick Karatzides; here on AVSIM). One of Gen. Yeager's favorite planes is the F-86. I downloaded it and recommend it too.I was able to land it on the first try, but it was a bit tough. Being the virtual test pilot, I decided to "be" Gen Yeager and see what the CL-13 had in the skies above Edwards AirForce Base (KEDW).My first and only test so far is the service ceiling. I've gotten the CL-13 to 53,400ft in stable flight. Everything kind goes to heck in a handbasket above that. I think I found the "c…

Hello all, Could anyone help me. I use FS 2002 and 2004. On flight simulator 2002 if I set my Antialiasing to any other setting than Application controlled I get a pink panel on the plane I am flying. This has been an ongoing problem for a while now, after many re-installs it remains the same. I am using a Gainward FX5600 256 mb's DDR Nvidia card with 1.5 gb's of system ram and a 2.2 Athlon xp.Fs2004 runs great.Does anyone have an answer or even a solution to this problem.RegardsDavid BowenCyber Air 062.

Hey Guys,I sincerely apologize for asking this question, I know that it has probably been answered, but I am honestly unable to find the solution to my problem, so I have decided to go for a more direct approach. I have downloaded numerous packages and when I go to select the aircraft there is a message like the one shown in my picture below. Anyone who knows how to alleviate this problem, I would be great indebted.http://forums.avsim.net/user_files/58531.jpgRegards,

Hi everyone.After many months of fs9, I'm pretty much down on my knees.Since now I've been suffering from every single problem mentioned in this forum; shimmering, dancing mountain horizon, CTD's,...you name it.I've survived through all this crap thanks to the great support this community is offering, nonetheless I've wasted an awful lot of time messing around to make things work, and I'm definitely unsatisfied with my flying experience (and fs9) so far.Although, I've had a chance to take a peek into the great potential of this version of the sim, which will probably see true light only in the next release.So, not willing to give up yet, I'm at the point where my system n…

Hi friends :-wave I'm getting this problem with an ATR panel I've downloaded: HDG and NAV buttons trigger increments in tenths instead of units. Can't remember exactly now, but there was a fix for this... or not??:-hmmm Can someone help me or point me to where is to find the fix?Thanx a lot :D Rino

How does the FS ATC work with the Garmin as far as departure & approaches, etc? Do you cut over to the Garmin when FS ATC gives you the "Resume Own Navigation"? What about the approach?I have gone through the training on the Garmin and looked at the actual manual on the Garmin Website. Is there any other resources to help get trained on the Garmin?Thanks!Barry

Hi fellow simmers!During some ac install I must have lost the default FS2004 Bendix radio stack: Bendix_King_Radio.GAU. (Very clumsy, I know!)Can someone please send me a copy, my lovely RealAir SIAI Marchetti uses it :

Dear All,I have made a complete mess-up with my Texture file, I have been like most people experimenting with various cloud textures, but unfortunately I accidentally deleted all my back-up copies of the original textures for the cloud .bmp's !!Where can I get the orginial textures from as now I am having a compelte nightmare with the visibility as it appears all blocky, I have read various other postings regarding the vis layer etc.All I require is the original default files.- Also once I have found the orinigal textures can I just copy them from the CD straight into my FS directory and overwrite ? or will this cause any problems with other addons etc. ?I do not really w…

Found out exactly what this does in the sim. If I disable it (value of 0) then you lose the nice grass textured polygons around all the airports and taxiways! Personally I had never seen this stated anywhere and thought some might like to know about it. I was working with some new mesh and noticed I had done this by accident doing some tweaking. Thought it was worth posting about!Hornit

Get yours at http://www.fsd-international.comBring on the FS2004 add-ons all you payware companies, I'm ready to buy!!Chris

I can see the VC textures just fine, but for some reason, no matter what I do, I cannot get the individual gauges to appear. Have the model=vc text in the aircraft.cfg and all of that. Any ideas / suggestions?Thanks In Advance!http://www.2decker.com/media/solent1-2.JPGAlex ChristoffN562ZBaltimore, MDhttp://forums.avsim.net/user_files/58539.jpg

Hi, Matt. Thanks for Charts and your time and effort you put into uploading and converting them. It

Does a graphics card with 256mb of RAM provide any significant FS2004 performance improvement over that of a card that has only 128mb of RAM? Has anyone done a comparison? Thanks,Robert

Hi, I know this is not an FS related topic, but I found this and it is great!!!!...."On this website, you can download a scaled-down version of the program that NASA scientists use to operate Spirit and Opportunity. During the mission, updates will be released on this site containing real data from Mars that you can add to your copy of Maestro."http://mars.telascience.org/home

Hi,I have downloaded the latest FSUIPC (3.14) from both Pete Dowson's site and also AVSIM, and when unzipping I am advised that the dll has the "Win32:Gaobot-61 [Wrm]" virus. I am using the Avast 4.1 Home Edition Anti virus program which is fully updated.Has anyone experienced this or do I have a very nervous anti virus program?ThanksDavid

Does anyone know how to get the Concord's landing lights to display in front of the aircraft instead of the three dots on the ground directly in front of the nose gear. I remember there was a key command that allowed one to adjust landing lights that displayed in the wrong direction by default. I forgot the key commands to adjust the lights to move forward and ahead of the aircraft.Thanks for any help anyone can give me...

Anyone else having this problem? No matter which texture set I'm using (currently Bill Lyon's latest) it seems the water is 'breathing' in that it changes / morphes it's shapes every second or so. Kinda like it's going in / out of focus. I use a Nvidia fx 5600 with the 53.03 drivers...have tried some of the older drivers and still has this effect. If anyone has had a similar problem and found a solution, I'd love to hear from ya...thanks!http://forums.avsim.net/user_files/58534.jpghttp://forums.avsim.net/user_files/58535.jpg

Anyone else have problem with this Scenery where the default terminal buildings are not excluded??I've tried everything to get rid of the default buildings including making my own exclude file, but can't seem to figure it out. Only way I can seem to exclude the default buildings, it also gets rid of the runways and aprons.Matt

Tell me wath kind of FS versions you have!(I'd like to know if there's anyone here with FSolder than FS98 (and FS98 as well))

Anyone of you gurus care to tell me how to tell WIN 98 to play nice with 1G of ram? I have two HD's one with 98 and I want to keep that set-up but also use 1G of RAM for the XP HD. When I want 98 I just boot to the old HD and use that install. I want to use 1G of ram, or limit windows to using 512 in 98, does that make sense?? How can this be done, I know I have seen it before with regards to cache or memory tweaks in sys cfgThx.Hornit