MS FSX | FSX-SE Forum

Hi, I would like to have your comparative impression between PRO-ATC/X and Pilot2ATC, I check the respective supplier web site and I cannot figure wich one to choose. I Have Also X-Plane 10, P3Dv3 and Headset with microphone. I use also GA and Commercial airliner on short, medium and long distance range. I know thar RealATC exist for Pro-ATC/X. Does it make an inluent variable on the decision ? Do you Have a cue based on your experimentation ? On the support ? Thanks Michel

Hello, I was wandering if it is possible to have another FSX installed on 2nd computer and use share-cockpit function to obtain 2D panels (as observer mode)? Michal

Hi Does anyone know if the EPR/Rat or the auto throttle is fully working on the SS DC-9 V2

I've had this on all my recent flights: ATC works normally for clearance, taxiing, during departure, handover to the centre, but then some moment during climb or cruise ATC "disappears". The ATC window only gives the choice of "Airports in proximity", but my own flight's following by ATC has been lost. I tried re-loading the flightplan into FSX but that still won't make a difference. Only once on the ground do I get the possibility to select ground control frequency, and all is back to normal again. What to do?

Hi, I was wondering which of the two (coolsky cs SS V2) is better, and also which has more systems simulated. Thanks

Hey Guys, I love the Boeing aircrafts by pmdg and captain sim to some extend. I think its time to move to the airbus to learn the systems !!!! ( pun Intended ). my queries are: Should i buy the airbus x or wait for the airbus extended ? or wait for the FSlabs version ? I look for in depth system simulations, so which is more simulated ? aerosoft or FSlabs . I ask this because i plan to do a lot of failures and ab normal checklist which go with it. Is Fslabs planing to do all the airbus aircrafts because their website shows A3XX which generally means all the airbus. With the development time i see that will be another 5 yrs ... :huh: I love to see a good ATC as we…

Hi all. I did a break from my usal GA flying. Recently i was using the default CRJ, with some liveries and sounds that i find. I'm having a great time flying on full fat ORBX regions with out worring about VAS, FPS etc, taking off Seattle. But now i'm looking for something better. I'm not interested on FMC and hardcore simulation (surely, soon or later i will end up buying Majestic Q400 or the AS CRJ). I want to get airbone fast, use default ATC and program my flight route with the default flight planner, don't bother with navigraph or simbrief. Just to enjoy the simulation and scenery. So I'm looking for a "carenado" style regional jet. Maybe you know something …

Does anyone know of a setting/option where I can get FSX:SE to start in the Free Flight screen. It now starts in the "Home" screen, which attempts to display a website from Dovetail- causing the sim to crash suddenly on start. The times it does start successfully, the website doesn't load. FSX Used to begin the screen where you last left off- but that function seems to have disappeared.

Howdy, I hope you're fine, i have some trouble with installing FSX Auto save 1.0.4 the error message shows : Incorrect FSX Version this requires FSX SP2 FSXSave installation cannot continue. NB: i've already installed the app but the module wasn't runnning correctly after uninstall and i try to install it again this is the issue Thanks in advance

I noticed this problem with FSX + acceleration on the F/A-18 back when it came out 9 ish years ago. Now I am seeing it with the default 737 on my FSX-SE. What happens is quite frequently when I lower the landing gear I get a warning that the gear is not down when in fact it is with both audio warning buzzer and the gear not down indication. After I land I notice the audio warning goes out once I retract the flaps. Now for the worse part. Once I land I have no nose wheel steering. The rudder moves but the nose wheel will not turn. I end up forcing the craft to the apron with differential thrust and braking. I use Saitek pedals with there driver but do not u…

I noticed today that FSMap by Aerosoft is 40% off (+10% Tuesday discount). I have heard a little about this product but could not find a good review anywhere. Does anyone who has this program care to chime in with some thoughts? I figure at $22, if it is halfway decent, it might not be a bad purchase. Thanks in advance for your help! Cheers, Pete

I'm trying to figure out if the problem I am having is unique to my setup, or is 'normal'. I really don't know how to fix this one. Problem: The GSX follow me car does not work if I ask for service from Yankee (Y), holding at Zulu (Z) to Gate 73 (Airside 4). The results are not only frustrating, but outright comical. Steps to duplicate: Start a flight with your initial location on 36L. Roll down the runway a little less than half way and bear right on Yankee. Hold short of Zulu and select Gate 73 in GSX. Request Follow-Me services. In theory, it should go something along the lines of B6 to north on Bravo or Charlie to west on Echo to south on Gulf and into A…

Hi everyone, I am going slowly mad as I have some issues with FSX:SE that make me spend more time @#@#%%%%%% around than actually flying. I hope someone can kindly help. 1. FSX continually crashes when I cancel a flight. 2. On occasions the program takes ages to start and I get a warning box "attempt to call a nil value" 3. On startup I get scenery errors on areas 120, 122, and 130. I have been trying to find out how to access FSX.cfg so I can see what these areas actually are, with no luck. 4. I have accessed scenery.cfg but it doesnt tell me whst these scenery areas are either. 5. I have some addons including Airport GPS that need to appear on …

Hello, So I've been noodling with carriers in FSX. No matter what I try, I can't seem to receive an ILS from either the default carriers or Javier's, spawned with AICarriers. I've tried every frequency I've seen mentioned - 110.00, 111.00, 112.00. This is in the default F18, the VRS Superbug, and even a C172 just to try it. No dice. ILSs work fine to regular runways. Is there some trick to getting the ILS from the boat? Thanks...

Hello all: I have experienced a problem with a KLGA freeware upgrade I made where while landing on RWY22 the plane will hop up 2000ft right before the touchdown point. I have did a little research and it seems like it maybe a problem with a conflict between the new LGA and the default LGA files. I have crash detection turned off when this happens, and I am certain if I had it on it would detect a crash. Can anyone share some guidance on how to change the default LGA scenery? I don't have any software for changing the files, just wondering if there is a way to find the file, and a way to tinker with it using notepad or word? Thank you. Mike

I just downloaded SCE to FSX and found many "Path does not exist" errors. How shall I corect them? Do I need un-install/reinstall FSX? :Whew: THX http://imageshack.com/a/img538/8886/LdaoR3.jpg

good morning Yesterday i was trying to update the taxi way graphics and something went wrong leaving the ground textures with a black snow or black fuzzy effect.I had this before and only way around i found was to reinstall any idea's

Hi, having installed Tom Ruth's lovely A310, I have started flying cargo runs with the Martinair repaint. GSX, however, produces baggage/cargo based on passenger numbers, and I am receiving only a single pallet for each cargo door. What can I change in the A310 cfg file to fool GSX into giving me lots more cargo? The GSX manual states (on pg 12) that: "The number of wagons in the baggage train depends by the estimated number of passen- gers on board, which is the total weight of all the loading stations, divided by 220 lbs." Where exactly is this, and how should I tweak it?

I'm scrathing the surface of AI Traffic/WoAI and I need some very basic guidelines for building up my AI fleet. First and foremost I'd like to understand what I would gain by converting fs9 AI traffic packages (that are plenty and well organized in the file/links library on avsim and woai) to FSX packages. The task seems quite daunting, so I'd like to understand if my AI fleet will benefit from it at all. I'm using WoAI Installer and AI Flight Planner (V 3.1.6) tools to manipulate and convert bgls. I found already a few errors with AIFP in a package from woai/avsim and was able to fix them by editting aircraft.cfg. What is also important for me is to have random …

http://secure.simmarket.com/taxi2gate-ksea-seattle-tacoma-international-airport-fsx.phtml I'll wait for FTX user review. I hope there are no OOM issues. Cheers!

Good evening, I am using the demo, latest version of OpusFSI and it is fantastic but I am not able to see any weather updates during the flight so I don't know if the demo only updates once. Question is what does the weather looks like when the software updates weather in the simulator? I know p3d control the cloud position but does the cloud slowly appears and the old clouds slowly disappear or does it change everything in a eye blink? I am wondering if it works like ASN, ASN does pretty good job with the clouds. I am using prepar3d v3. Thanks, Brian

I started a new thread in case this was missed in the other T2G OTHH thread. For those with BGL based AI, download http://stuff4fs.com/...er=AIFP&JS=TRUE It has a "Find & Replace" option to edit airports. Ok, here is what you do, in aifp2, go to "files", select "Open Traffic BGL" after it loads, at top menu, select "flight plans", select "Find/Replace" Next, where it says "field condition", select "Destination", next in the "Find box" type OTBD then in the "Replace" box, type OTHH then click on "replace With" and your done. Easy as that. Edit: Re compile BGL when finished Works in FSX, and P3D Not tried this with My Traffic, that could be …

I have a question to all there who fly this thing on daily basis, i really enjoy aircraft, but just was curious if this thing as busy hands on flying in sim as in real life, specially when coming for approaches, seems like it takes so much hands on flying to bring this bird into smooth landing, constant trim and constant adjustments, it just wants to get away from you, doesnt feel like solid when like flying 737 for example. for those who will say check ur balance weight etc, yes all within paramenters i checked that first just feels i am trying to balance a rock on a pinhead of needle. i do love the aircraft and just want to know if this is something normal or …

Hi Has anyone had problems loading after installation the Aerosoft Airbus update 1.31. I and many others are getting a blue screen when trying to load the aircraft. Aerosoft has closed the topic and says it's the fault of the user's computer. I have all my other addons including PMDG, Majestic, A2A etc working perfectly and don't accept Aerosoft's explanation. I'm using Windows 7 64 bit and FSX. Any comments or help please. Cheers simdown42

Hello question In the PDMG 777-200 before the patch you could get wind information from Simbrief and could directly link it into the FMC saving a large amount of time. Question in the PDMG 747-400 Queen of the skies, is it possible to do this as well. Also is it possible to transfer the wind data into the FMC of the Captain Sim 767-300 ER without actually typing it all? Thanks for all the help. Also I have the latest version of PDMG 747 and I have occasionally turned the Brake sensitivity down to practically nothing and the Null point to full. Yet the auto brakes still don't function. Thanks