MS FSX | FSX-SE Forum

Guys it seems that when using an FMC planned route, it is almost impossible to get IFR clearence or if you just ask for clearence straight out they give you a different runway then the one you program into your FMC.Its cool using the FMC in 737NG, but it seems like I'm breaking all kinds of laws by taking off without clearence and landing without clearence.How do you guys do it; that is using ATC and your FMC programed route. I would guess maybe creating the plan in the fs9 planner then somehow converting it to be used in your FMC.I'm new to the FMC side of things; and have just bought the 737NG stuff...while I'm definately no newby to flying GA thru big iron; I am new to…

Any one knows what happened to Richard Probst and his amazing 737-200 panel that was in the works? The site seems to have been removed.Thanks,Dinshaw.

Hello fellow simmers! I'm completely in love with the bush flying after I purchased new comp that can handle all the glamorous graphics and effects. :-coolI have recently bought the DHC-2 Beaver from Aerosoft, and oh boy it is fantastic! Nothing is more enjoyable for me than manouvering in the steep valleys of BC, (I have downloaded numerous meshes btw) and trying to land that overloaded Beaver to the small airstrips of the area. :7Anyway, to the point: My only problem would be that I'd like to navigate "the old way"; dead reckoning etc, but I lack of usable maps. I found that the FS's own map is really good for that, but the thing that annoyes the cr** out of me, is the…

In the Sim, major roads and highways in Australia look like they are dirt roads from the air.Does anybody know how to alter the appearance of them?Thanks Barry

Does anyone know of any good sources for VFR charts of Japan? I already have a fairly comprehensive set of terminal instrument procedures and area arrival charts.Thanks in advance.

What were the flap settings on the 707-320 series? I have 14,17,20, 25, 30, and 50--was 40 an option? JS

Hey folks!Howsabout some multiflying in one hour (10 pm Grenwich)?Let me know who's on!One of these servers: Any Pref?VirtualPilot Open Session67.38.117.13Flightsim.no 217.8.141.88Lets do a GA flight on a set flightplan, flying maybe Colorado - Utah or something? Maybe fly western Norway?I'll look at a flightplan or suggest one here!Hope to see ya' !-Dasher7

Hi:I am about to paint the Boeing 737-300F that Aerolineas Argetinas recently aqquired (sorry if bad spelled) and I wanted to Know if there is any good model to repaint for FS2004 and another (if the 2004 model is not compatible) whit 2002, of a B737-300.If it has the cargo door on theyr side the better, if not i will have to let the cargo door painted.Thanks for your repliesHelio Alberto Regalado Moreira

Hey guys, just popped over there to see if there was any progress on Deanes Cessna floatplane that I was wishing and waiting for and saw the notice, bummer. http://www.aerialfoundry.com/home.htmThanks Dean, love the hornets!Regards, MichaelKDFWhttp://www.calvirair.com/mcpics/mcdcvabanner.jpgCalVirAir International

There were 2 threads this past week dealing with the various ERJ's and I suppoose prompted by the release of the FeelThere ERJ. In one of the threads someone mentioned the ERJ by Charles Fox and Bill Grabowski that was updated for FS9. I have the Wilco CRJ and was not satisfied at all with it. Also have the free Fokker 100 which is good but not really complete. Well, I got the CF ERJ on Friday (cferj.zip in the library) and I have to comment that this is an amazing piece of freeware. The best freeware I have, up until now, was the Lockheed Constellation that Bear just reviewed. This ERJ goes well beyond even that. It is quality throughout from systems, panels, to t…

I have a considerable number of files for AI aircraft for FS2002, can I use these in FS2004?

Does anyone know where I can find vspeed (V1,Vr etc) tables for the dash 100 and 500 ? regardsEd http://forums.avsim.net/user_files/129637.jpgAMD Athlon 64 3500+, 1024Mb PC3200 DDR, 300Gb HD 128Mb DDR Nvidia 6600GT PCI Express, Audigy 2 ZSCH Products Yoke, Pedals and Throttle Quadrant

i fly for a charter airline and we service the bush areas in washington, etc and i was just thinkin the other day - and i dont know how you guys determine where you fly, but i have a deck of cards and i pull out one card or more for each airport i service - which is all of the fsaddon/georender airports in the washington area, ok now, no matter how you pick your next spot to go to, i was thinking that we fly to many, correct?what im trying to say is, its easy to haul cargo/pax from this airport to that airport then this then that, etc etc, we could do that all day long - which i sometimes do on my day off, now what im trying to get at is, in real life, there would be not…

Hello,Most of you guys know the site http://www.myairplane.com where you can get approach plates for the US airports.Anyone knows where I can get a similar site for Canada and maybe Europe and the rest of the world?I know I saw a page one day with dozens of links but I can't remember where it is I saw it...Any help would be greatly appreciated.Thanks

I hope I am posting this in the right place. Whew! This site is confusing!Anyway, I wanted to thank Tony Gould for all the hard work he went through to redo all the default FS9 aircraft textures. Great job, Tony! ;-) In fact, I have uninstalled FS9 and reinstalled it so I could use those default FS9 aircraft again. If anybody hasn't seen these textures, you should check them out. I couldn't believe how much nicer the planes look in Spot View and how much better the Virtual Cockpits look.Thanks, again, Tony.Tim

....and bought the Classics Vol 2. I'm very impressed with it. I finally got all the updates done (i also made like an installer, with all updates in it, so I can easily reinstall!)I found one small error with the DC10s, but I'm lovin' 'em so far...even with the limited time I have in them!

I just acquired FS2004 with the hopes of making use of some of the great addon scenery. I have tried a few and think I followed the directions but can't get it to work. For example, I downloaded the New York Objects V3.0. I Unzipped it, copied the NYObjects directory under the addon directory under my flight sim install directory. I then go into settings upon startup and "Add Area". I restart FS and I do see the area NY Objects there (Prio 1). However, now the buildings that it is supposed to replace (e.g. World Financial Center) are completely gone! I also tried the New York Modern and I get no World Trade Center and, again, the World Financial Center is gone. I tried th…

Hello,What is it that is set that tunes the "morse code" audio? What do I turn on/off to disable/enable it?It seems that it is set for all of my addons whan I start up so I assume it is in my default startup somewhere.Thanks,Ron Sagel

freeware or payware?ricardo

Ed inspired these, took a few times to get this!!http://forums.avsim.net/dcboard.php?az=sho...id=214787&page=Ed, if you see this...I need to chat with ya for a minute :)

Several months ago a thread was posted with solutions to tail-dragger handling problems (lack thereof), principally Cubs. A great series of solutions was provided by a member named "farmer", which I failed to print, involving a/c cfg scrape-point changes and some air file changes for the FSD Super Cub 180. I have searched for this thread, using every subject I could think of, and have yet to find those posts. Several more recent inquiries about ground-handling for tail-draggers refer the writer to the solutions by "farmer", without providing the reference location. I have found that searches of these forums have a kind of "Christmas Morning Surprise" element in the result…

Hey Guys,I have been watching the Aerosim stuff closely! I want to get the Aerosim things, but I was hoping they my do a pick your package deal. I'd like to get the L1011 and DC10, but not the DC8. Maybe they'll do it! Congrats on this forum! And way to go repainters and Aerosim!I don't know if they do either, but here are some suggestions for them:1. Make the main file fully updated, so new customers don't have to purchase the main, then d/l all the updates. (as I said, this might be done already.2. Put a link on their website to this forum (because it is very advantageous (sp) for them.3. Do as I said above, and maybe have various packages. I would like L1011, …

This topic has been moved by the moderator of this forum. It can be found at:http://forums.avsim.net/dcboard.php?az=sho...&topic_id=10826

Hello, I have a question for you guys! I love this scenery. Wouldn't fly without it but I am stuttering in turns and in flight. The frames are fine but it stutters. I am noticing some hard drive activity during this. I am assuming this is a ram problem? I am running 512mb of ram and my system specs are listed below. I remember in the past this was cured with another sim with a processor upgrade but something is telling me that this is lack of ram? Any suggestions?Athlon 2400xp512mb sdramati 8500 64mb7200rpm hdyaddda yadddaa :)Thanks,Todd

Hi All,I Would like to congratulate the developers on a fantastic add-on, it really does bring the flight-simulator to new standards. Combining it with FE2004 and you'll get unparralelled graphical realism (until fs10 comes along, offcourse). There is one small thing I would like to say as a side note; Being a beta-tester for FE, i have worked very close with Peter Wilding to get him to the results we have come to enjoy today (Update 3 is just around the corner), and although the BEV ground textures are top-notch, their water, environment and ocean-heightfield textures IMHO are not. Firstly the Ocean-heightfields are 1st - the wrong size, 2nd wrong color (why blue? it's a…