MS FSX | FSX-SE Forum

I have the IFLY 737. I would love to remove the cockpit window reflections. they are somewhat distracting and I would like to have a nice clear view out of the window. Is this even possible? Secondly is there a way to lower the volume on the left and right pack. they are quite loud. I have tried lowering the volume settings in FSX but that did not work. any help would be appreciated.

Hi, I'd much appreciate help with Aerosoft Wilga's gyro compass. According to the manual: - On overhead switch gyro horizon on. After 2 minutes unlock the gyro horizon using the arrestor knob on the gauge, check arrestor indication is not shown - On overhead switch gyro compass on. Set the correct heading and after 2 minutes unlock the gyro compass using the arrestor knob on the gauge, check red indication is not seen ...which is OK with the horizon, but I can't see HOW to "set the correct heading" in the gyro compass, nor it is specified at all in the manual. Of course I can lock it with the arrestor knob, rotate the aircraft horizontally in slew mode until the …

Is it safe untick my Fsdreamteam and flightbeam airports in the scenery library to save on VAS? FSX loads all the sceneries even I'm not using them. I don't want any conflicts of when the next time I choose to fly at one of their airports the buildings are missing etc.

I have searched up "free FSX ai" on Youtube looking for a better freeware AI addon (WOAI kinda sucks with radius pattern) and I came across ### AI. Is it really a freeware addon? I have been told its a freeware addon but now I do not even remember where that came from!

hi all just wondering if anyone has some advise I'm currently running fs global ultimate all regions and ftx all uk regions ftx lc Europe ftx global and global vector. jus wondering do I need all these together of just some and which would you recommend many thanks Darren

I had Ezdok installed in the past but it totally screwed up my fsx. I don't care so much for the different cameras but I like the way the plane shakes at takeoff, turbulence and landing! Now I see in the cfg file the values of dynamic head movement and such. Can I get simular results if I play with this settings?

I got SimConnect from the Acceleration SDK to work with my FSX:SE. I'm new to FSX development and it seemed that people where having trouble getting the SDK to work with FSX:SE. Is that so or is that old news? Here's a screenshot:

Hi all, I ask the question because almost a week ago I bought one of their 747 repaint packs. I've had products from them before, and they've always been of a pretty good quality. However, I have a problem - I can't install this pack because the installer is asking for a registration key, and they haven't provided one for my order. So I raised a support ticket through their website. A couple of days went by, and there was no response from anyone. So I raised another ticket. Still no response. And finally I tried raising a third ticket under a different category - still nothing. I've even sent them a message via their facebook page, and still absolutely no response. …

Ok so long story short. I was advised to delete my fsx.cfg file for it to re-generate a new one to fix a certain scenery I have installed (which didn't work BTW) and in the process I have all my add-ons affected by this now. They all seem to work normally, but I'm missing pretty much all my re-paints for every add-on. For example my PMDG series It only has 1 or 2 repaints showing up in FSX. Everything looks good in the folders as if they're installed. I've even tried uninstalling/reinstalling my PMDG aircraft to get to the same result. It also affects new installs with multiple liveries. I am wondering if it is because I have FSX installed in my Program Files x64 …

I like flying to the New York/Newark area but the frames are just so awful for me, I get around 10-15 in the NGX. I'm using FSX:SE and a lot of my fsx.cfg is already tweaked. At New York the only addons that effect the area are MyTraffic X, FTX Global, and ActiveSky Next. The rest of my addons are either aircraft or other airports (Buffalo, Paro, Dubai, St. Maarten, etc.) Also, I kind of like my settings how they are right now. Would getting an addon like New York City X increase my frames? What other solutions are there? Here are my computer specs: Motherboard: ASUS Z-170 AURA CPU: Intel Core-i7 6700K (overclocked @ 4.639GHz) GPU: Gigabyte GeForce NVIDIA GTX 106…

I have following issue: I'm in cruise, my route has no link-type issues, it's downloaded from SimBrief. I choose a point to which I want to descend in VNAV. I wait until I'm 2 nm out of TOD, I press Vnav it activates in white. Alt sel on. Altitude set properly. At TOD aircraft starts to descend, 5 seconds after it switches VNAV off and enters pitch mode. What the...? EDIT: FIXED Reason was simple, Mephic, who is a complete utter idiot, was pressing VTO instead of entering appropriate waypoint as "TO" in VNAV screen. Thank you, I will be learning something new every day with this amazing bird

I have scoured the forms and watched 10-15 you tube videos and cant find my answer. I wan to stretch my FSX steam version over 2 - 24" 1920 x 1080 HP monitors. Apparently eyefinity only supports 3 monitors at this point. Is it still possible to split the screen on to 2 monitors? I have it setup with one screen for field of view currently and the other for alternative things like GPS. This works but I would prefer a 2 monitor stretched view

Would some kind soul please help me out installing Reshade and Master Effects? Step by exact Step would be an advantage! I've downloaded the latest Reshade and Master Effects. I have a 64 bit system running and (obviously) 32 bit FSX, so placed the 32 bit dxgi.dll labelled as DX10 compatible. I am running DX10 mode with DX10 fixer, ReShade.fx and MasterEffect.h are in the FSX main folder. I have the Master effects folder within the main FSX folder and that folder contains another folder. I have opened the MasterEffect.h file and assigned scroll lock ley (0x91) to enable effects but nothing is happening, nor is the screen splitting. When I start FSX I get a reashad…

Good evening everyone ! I Had a problem with my FSX i had blurry ground textures i opened a topic i was told to have reset my fsx.cfg the blurry texture problem stopped but my FPS is extremely low i tried adding some tweaks it's nothing like the old CFG with the blurry textures ! OLD CFG FPS WITH PMDG 737 NGX AND ORBX EU ENG : 12-22 NEW CFG FPS WITH PMDG 737 NGX AND ORBX EU ENG : 7-9 These are my specs : CPU:Intel core 2 Duo E7400 2.8GHz 2.79GHz RAM:6GB DDR2 GPU:Nvidia Quadro 2000 Please help me tweak my sim ! Addons i have : REX 4 TD and Soft clouds ORBX Global and vector and EU ENG And PMDG 777 ,737 And the aerosoft A321/320 All fly tampa airport scene…

Hey, this may be a weird question. Is there a mod that changes the physics in fsx and so you can do belly landings in fsx better without bouncing? And water physics so you can at least set the plane down on top of water? I don't know, its probably not possible. I don't think enough people would want to practice these crash landings.

New version of Wilco Falcon 7, v2.0 is out details on their facebook page changes to ILS, Nav database etc haven't tried it yet, but hoping for an improvement in frames. :smile:

Has anybody come across this problem, know a resolution to this problem where the snow on the ground appears to be in tiles. See in the screenshot below - the snow-covered ground ends, behind the aircraft, in a straight line.

I am being warned in the upgrade process that Nassau X developers used the latest version of SODE for the scenery updates. This can create problems for other installed add-on sceneries that used earlier SODE versions. Is anyone here on the forum experiencing issues with other add-on sceneries because of the Nassau X upgrade? If so, were you able to address the issues without ditching the Nassau X upgrade? Thanks in advance for the kind responses...

Like thousands of others, I've downloaded aircraft from the Library to get favorite liveries only to discover the aircraft doesn't perform as well as desired like slow climb or can't achieve or maintain a reasonable desired airspeed. I downloaded a Project Airbus A321 base file and a couple liveries to go with it, but it can't climb beyond FL180 and maintain a reasonable airspeed. I've been using a vertical speed of 1800fpm and speedhold set at 300 IAS. The max altitude I can achieve is FL250 with VS down to 1000 fpm before the aircraft is virtual stall mode. At that time, I have to level off to prevent the stall. N1 never goes above 87% and airspeed is down to around 200…

Hi all, Very basic question here. I'm using DX10 with Steve's fixer but had this same effect with DX9, so don't think it's relevant. I've always been a big of an AI airliner traffic but, willing to tolerate poor performance for absurd amounts of planes. (I'm using a custom mix of FSX native and FS9 models where FSX ones aren't available). Usually I run airliner traffic at 100% but limit it to 100 planes with the traffic optimizer. In the past, that usually meant a visible performance hit just from those AI aircraft existing in the sim, whether or not they were actually in sight. So since I lock frames at 1/2 Vsync it would drop e.g. to 20 or so in busy airspac…

Looking for correct navigraph path for the majestic q400 for fsx steam. Any help appreciated- pro.files(86) steam, steam apps,, common, fsx, ??

There s no doubt in my mind this has been answered here, but I have not been clever enough to find the appropriate search terms to net me any results. My apologies in advance if I unintentionally missed the obvious. 1. Is there a means of editing the entries in the Coutnry filter of the Free Flight > Select Airport dialogue of FSX. For example, in mthe drop down I have US, USA, United States and United Statesq. I would like to be able to promote some consistency and change them all to United States. 2. I have a lot of custom scenery (ie non default) as I'm sure most do. Is there a means to customize the airport ID with a user type identified, text addition) to …

My assumption regarding external fps limiters is that they would prevent fps from going past the set limit. In my case, no matter what number I set it at, with fsx internal fps set to unlimited), the fps number always spikes above the set limit number. I have tried it with vsync on or off and various refresh rates. Nothing. The only thing that works is fsx internal fps limiter. So what am I doing wrong. One more thing, N inspector frame limiter starts at 29, yet it has a 1/3 refresh rate option. My monitor is 60 hz, and I should be able to set my number to 20 with 1/3 refresh. Some clarification would be appreciated. A 3 step guide would be helpful. My system is…

Need a little help in deciding which is the best to use with the Real Air dukes. The Reality GNS 530 or the Flt 1 GTN 750.All opinions are welcome. RLJR

I had posted 2 ish weeks ago about framerate issues with FSX SE, and thanks to your help it's incredible now! I also bought Active Sky 2016, which actually increased my frames as well. I'm going to have to adjust some settings to get better visuals, but KPIT at night (with night environment Pennsylvania and Megascenery Pittsburgh) I get 25 FPS. During the daytime (with Night PA off) I am at 45 FPS. In the air my FPS is a constant 30 to 35 FPS, and going through the cloud layer I'm at 25-30. It's incredibly smooth now!!! And no more lag! edit: Someone also mentioned going to other airports like ATL, and those are smooth as well. I don't see my frames drop below 20 at a…