MS FSX | FSX-SE Forum

Does anyone know what default AIRAC cycle was in use when the latest FSXSE was released? I ask this so I can obtain charts for this time period, if even possible. I have no need to update AIRAC cycles and charts all the time as per how I fly on the sim. Thanks, Andrew

Hi everybody, I experience some issues with the ground map of EFB since I've added the PacSim scenery for RPLL. It doesn't show the correct parking stands and taxiways. I've tried to update the AFCAD, then update the Data provider of EFB, but it's still showing the default taxiways and parking stands of RPLL. However, GSX and FSX both recognise the new BGL because it shows me all the available stands in the RPLL_ADEX_GM.bgl Does anyone had this problem and find the way to fix it ? Thanks in advance.

a week ago my fsx flight planner window was working but, yesterday i wanted to make a fpl from SKBO to SCEL to use it in B787 Aerosim. When i enter to the window, the game crash. it stop of work and you can only close by homeworks administrator. HELP PLEASE!!

As I indicated in the title, I think that reinstalling FSX is inevitable, but I'm hoping that someone has some clue as to what might have caused or could potentially solve my issue. Note; I have deleted and allowed FSX to rebuild; fsx.cfg, dll.xml, exe.xml, scenery.xml, controls.xml. logbook.bin. Cleared the scenery/facilities and shades caches, Also have deleted all FTX Global, etc., but there likely is stuff leftover (the nature of FTX!). Other than that, no third-party add-ons are loading. Anyway, using Process Monitor I can follow the loading of FSX SP2 and noticed that once it completes the steps for 'Logbook.BIN' it goes into a 'Thread Exit, Thread Cr…

FSX Steam Flying any plane from any airport. As you can see from the attached pictures anywhere a road appears black boxes appear. I can see cars, trucks as traffic but cannot seem to get rid of the black boxes. In scenery I have unchecked all addon scenery but that did not solve my problem. System: i5-7600K Kaby Lake 3.8mhz Gigabyte Z270X Gaming K5 16GB DDR4 (2x8) Ram 3800 AMD Radeon(TM) R7 370 Series 120GB SSD & 850GB SSD Dell S2415H(HDMI) 24" Samsung SyncMaster 2243 22" Addons: EzDok v2 FTXAA_ORBXLIBS New FSX Library Objects FreeMeshX - North America Toposim US Southeast Rex4 Texture Direct

On page 4 of the Special Feature Guide there is a listing of the joystick axes names-X, Y, Z, ....FSlider 2. How do these names map to the fsuipc designations for the axes. For example, PFC throttle 1 in fsuipc is axis "U"; the USB Game Controller views it as Xrotation. How does this correspond to the listings on page 4? Thanks-- Robert Willis

Frustrated with WOAI; never any problem running under FSX! I'm running FSXSE on a Win10 platform and cannot get WOAI planes to show up. I've been flying FS for about 10 -15 yrs and pretty much know how to get around the file structure however I just can't get AI to work. I've spent two weeks installing, reinstalling WOAI, reading posts on this issue across many websites and nothing seems to work. I'm well aware of the mixing of FS9 with FSX issue and AIFP3 never shows any FS9 files present so I'm relatively sure that is not the issue. Rather than what I've tried better to see how I have things set up now: Traffic files in Addon Scenery: STEAM\....FSX\Addon Scen…

Hi, recently I tried searching for my FSX.cfg file but I couldn't find it. Only what I could find was a FSX file (without .cfg on it) and when I opened that there were still my configurations. Can I still use that file to make configurations or not? Beacause I deleted by mistake the FSX.cfg

Hey! I've recently been having some FPS issues with FSX, and I would like some tips on how to get better FPS (30+), and good graphics. (Not really low end graphics, or not really high graphics, just normal ones) NOTE: I don't really want to upgrade my PC at the moment. Guys, I need help how to improve my performance in FSX. My specs are as follows (brace for impact): Operating System: Windows 10 Home Processor: AMD A6-6310 APU with AMD Radeon R4 Graphics System Type: 64-bit operating system, x64-based processor ------------------------------------------------------------------------ My fsx.cfg is here: http://…

Hi, sorry if previously discussed, but I just discovered this in FSX Acceleration under Windows 7 Pro: Once you choose the variant of an aircraft with blank textures (i.e. the variant whose texture folder is named ""), then you can't choose another variant for the same aircraft unless you restart FSX. To be more precise, you CAN actually choose a different variant, but it will keep showing the blank textures, both in the preview window and inside the simulation. Any cure for that? Thanks in advance & best regards.

Hi there, My airports in FSX are showing black vehicles and jetways. Is there a way to fix this? I got a file fsx_veh but there is no explanation as to how to install it. What's the best thing to do? Any help? Thanks in advance. John Goncalves.

When I am flying an IFR flight plan, following ATC commands, when I am nearing my destination and ATC starts vectoring me in, is ATC actually vectoring me according to a published Approach that I can use the chart and GPS as an aid, or is it just random commands that may or may not be the same each time I fly the same flight plan? If ATC is actually vectoring me according to a published Approach, how can I tell which one it is? Thanks, Dave

I've never had this problem before. I have the PMDG 777 and FS Labs concorde and have always changed views continuosly between VC and spotview. All of a sudden now, when I change views in these two aircraft, I get the chime that I am low on VAS and I see a significant drop in the VAS ( I am using FSUIPC to monitor VAS). What can be the cause of this? Assistance to solve this one would be greatly appreciated. Regards Trevor

Hey there, I am currently uninstalling everything related to FSX:SE because I haven't touched it in almost a year and want to move XP11 to my SSD once it leaves Beta. In doing so, I have encountered some minor problems, maybe some of you can assist me with your knowledge: 1. FTX Central: How do I uninstall that? It doesn't show in the control panel and there's no uninstaller that I can find in the respective folder. I have found a couple of threads related to that problem, but it seems to be difficult. Does anybody know a reliable method of cleanly removing it? I am still on V2 btw. 2. Flightbeam KDEN: Oh god, I've always hated their DRM and FS dreamteam Co…

So i am currently using WOAI and AIFP side by side to create my AI traffic as its easier to add the 787 and A350 as well as creating my own flight plans. Anyway its taken me around 2 months to add what I have done and I really dont want to have to do an uninstall and start from scratch. When I used Ultimate traffic 2 I had my sliders set a max and had no issues like this. I'm not sure if I have missed something or not but all the traffic seems to be landing at the same time. (well 1 aircraft lands and about 8 go around) Anyway I have reduced my sliders to 15% and again still no luck. A lot of empty parking spaces and a ton of aircraft circling the airport. This is really …

Can anyone help?? When i am inside the cockpit..i hear all sounds nicely...for example gear up/down lever is very loud...if i then go outside i still hear this sound as if i was still inside the cockpit..This is confirmed as if i start the APU i do not hear anything outside?? I am using Chaseplane for my views and the new sound pack for the noises...but this happened before those were installed.. P3D version 3.4.18 in hope

Hi I loaded my fsx-se a few weeks back only to realize that no aircraft approached for landing at airports (EGLL, EGKK, EGSS). Instead They just pop up in their parking places. Aircrafts have no problem taking off. This issue is not isolated to the UK but across my FSX-SE. I do see propeller planes coming in and out thou. The only time I get airliners to land is if I fix a test flightplan so it takes off and comes back to land at the same airport. Does anyone have any ideas? Thanks.

Attempted to install an Avsim AFCADS KMEM. Went to FSX:SE directory to find that the addon scenery folder wasn't there. Any input would be appreciated.

Have you guys ever attempted to automate any part of the FSX startup process? If so what have you done?

Hello all, my first AVSIM post. Ive been a long-time casual user of FS9 and now FSX. Over the last few months I've been getting more interested in real world techniques for commercial airline flights and since Christmas I've been mastering the 'Freemium' 757 from Just Flight. Now I don't intend this thread to become a discussion on the comparable merits between this aircraft and other superior pay ware models; suffice it to say, I LOVE this aircraft and it is just the level of on-board systems immersion that I want. My question; does anyone know if this aircraft is sufficiently equipped to be able to fly SIDs and STARs? And whether there is a way to progr…

Overall, this seems to be quite a nice, accurate looking model. (Cannot comment on how it flies compared to the prototype, but it "feels" like a nippy bizjet should imho). https://flyawaysimulation.com/downloads/files/2846/fsx-honda-jet/ However, the prototype has a clamshell airbrake (similar to the Handley Page Victor and BAe AVRO RJ100) in the tail, but the sim version doesn't appear to model that. Yes, the spoilers work as do the other control surfaces. I tried chopping the throttles in a descent and deploying the spoilers, but no airbrake operation. Am I missing something? Thanks.

One of the things I find most challenging about FSX is the myriad of addons available, how they interact with each other, and which one to use for the best desired effects. Take for example night lighting. I have three (maybe 4) applications which appear to configure night lighting effects. Which one do I use? Which one takes precedent if I were to configure each one? I have REX4 which offers 23 sets of airport lighting profiles. I have Lights of UTX Interface which offers what I see as perhaps a complex configuration tool allowing different effects according to road type? I have FTX 3D Lights Tweaker, in addition to two tools I am not positive on their purpose…

So I got ezdok quite sometime ago but haven't used it till now. I'm in the 1.16 version. So my issue is that when I go to the aircraft view or the external view whatever you wanna call it, I am stuck in the zoomed out top down view basically seeing earth and not the plane itself. I have searched tons of avsim discussions but still can't get any help. So someone please help me ASAP.

I tried this question before but it kind of veered off-topic and I didn't really get an answer. I have the FSDG-Nuuk scenery which comes with an AI package that includes helicopters making realistic take-offs, hovering and then doing a realistic transition to forward flight. Heli-Taffic 2009 does NOT work in Steam so that's not the answer. Can someone tell me if it is possible to replicate this with other FSX-SE sceneries and if so, how? Thanks Ian

Hey, I've recently been doing IRL flights (and FPL's), and I've realized that fuel for me is a huge problem. On most fuel planners, and FPL's, it comes up with one fuel number (block fuel). However, I've realized that as I'm using default FSX fuel loader, you have to load up a certain amount of fuel in each tank. However, let's say the aircraft that I am using has 8 tanks. You can't just divide the block fuel by eight, as each tank has a different capacity. Is there any way to find a way to load the correct amount of fuel into the aircraft? Signed, Jacob Passam