RXP GTN 750/650 Touch

hi im downloading Garmin Trainer Database but the progress bar stuck and not move (more than 1 hour) Please help me Thank you

Hi, I created a set of checklists for the GTN using the Garmin ACE. They're based on the Just Flight PA-28 Arrow III manual and the Pilot's Operating Handbook from Piper. The file is attached to that post in the X-Plane.org forum. If you spot a typo, error or anything else, feel free to fix it using the checklist editor (link in the aforementioned post) and share it.

Just installed the latest version of the GTN750 into XP but they will not turn on

Hi all I bought RXP GTN 750 For XP 11 today , V2.4.9 and Trainer 6.41 Installed in the default installation folders and Windows defender was disabled , it seems the gauge are corrupted or need other graphic settings , please see the image in the link https://www.dropbox.com/s/flkqyk4tzs5jius/gtn750.jpg?dl=0 same problem with 2D in default C172 Windows 10 Home , XP 11 V 1.05 Any idea to solve this problem? Best regards

So, after I figured out how to get the GTN 750/650 working with my setup, I loaded up the Carenado King Air B200. Start up the battery and the avionics, every thing was looking good. I turned on the GTN 650, then powered down the avionics and battery. When I tried to turn on the battery I noticed that the battery switch wasn't moving. I did the same for the avionics and it didn't move. Since I have a couple of Saitek panels, I usually turn stuff on though that. I noticed that the power did come on but some instruments didn't look right. The GTN 650 come on though. Here is part of the log.txt file where the problem occurs. [SASL INFO] loading GPS_hdef_dots_c…

I have the older version of Flight1 and was using FSX Steam at the time. I now am using X-Plane 11 exclusively and purchased the new Reality XP version for X-Plane 64 bit capable? tried to down load several times and the installer cant find the X-plane folder on my C: drive even when I manually select it? seems to be looking for the 32 bit path I don't know if this could be the problem. The trainer soft ware is installed and working properly, very frustrating. I hope someone will be able to help get me going. I really like the program and have an actual GTN 650 in my airplane. There also seem to be security issues both windows and Eset do not like the soft ware. I had to…

Hi, I'm pleased to announce v2.4.9 Release Candidate is now available! This update includes stability and performance enhancements, and corrects all known issues to date. Please make sure to post your feedback for this version in this thread only. Once we get enough feedback, this will become an official release through "Check Updates..." Please note: along with enhanced support for the latest trainer 6.41, this build tries addressing the 'black screen' problem some of you have reported in the forum. We'd particularly like your feedback on this issue. Download link for both e-commerce installers

Can this one or any other device from RealityXP get fully integrated into a virtual 3D cockpit in X-Plane? I used Google for two hours now and find no description/ how to guide to estimate if I can do that. I read that it is possible in the PilotEdge forum. But I've no clue, how difficult that would be. My interest is to put such a device into the 3D cockpit of the Carenado SR22T aircraft. Second question is how regular one can update the database for the tool and how much that cost? Many thanks and cheers, joomie

Just downloaded the latest release candidate, went to install it and got a message saying I had reached the activation limit and that I should sign in to my account to reactivate. I didn't know I had an account and have no idea whatmy login and password would be. I purchased my software from the Reality XP website. Any hel

Hi, I would like to update the Garmin nav data in my unit but want to make sure I purchase the right product to purchase. Does anyone have a link to where I can purchase and what product is the one for the RXP units. Thanks! Ken

Hi, flying round for the last couple of weeks the 750 has been working fine, yesterday fine today back to black screens, any thoughts.

Hi, quick note to let you know v2.4.8 is now live! You can now use the Settings Panel | Check Updates button, and get the release notes and download the installer. New: Added support for the latest GTN Trainer v6.41 We're now working on the next update with support for pop-out windows on XP11!

Hello, I have windows 10 , FSX I have bought and installed RXP GTN 750 , I think I have done everything correct, new panel.cfg, realityxp.gtn ini in good place in the plane folder, the wizard tells it will reload the plane, and nothing changes, the same gps than before ( I speak of A2A planes, like C182 or Comanche ) I think that my graphic card ( ATI 512 mo ) is too weak ; is it correct ? if so, I would like to have a refund and buy an older gps, for instance the rxp GNS-530 WAAS ( I see that you gave a link to have it ) can you tell me your opinion, I really want to have a reality xp gps, even with my old ( but still in good shape ) graphic card…

I've been using the GTN 750 for a while. Stopped simming for a short period of time and now I cannot get the 2D popup to appear. Funny thing is that I have the Cessna 172 modded with the GTN in the 3d panel and it works fine. It will come up when I click on the hotspot and also works from the menu. On any other aircraft, when I try to bring up the 2d popup from menu, I get nothing. I tried the reset and still nothing. Any ideas? Thanks:)

In the newly released XP11.1 beta, the map will not zoom on the GTN750.

Hi, A quick note to let you know we've further decided to delay the release of the update mainly for stability reasons. I'm not satisfied with the 'black screen' fix so we rather ship a sound update with a little delay. Besides, the next update restores the mouse wheel on XP11.1B3

What is the most up-to-date version beacuse i am having problems with it

I would like to make the suggestion to have a location where RealityXP users can share their aircraft integration setup files. Just a suggestion, rather than having to scour the internet.

Hello, I purchased the 750/650 combo and absolutely love them. However, I am totally in over my head when it comes to getting them to integrate into the 3D panel. I was able to find bluebell2's file to integrate the 2 duel 750's in the 172 default and they work great. Are there any other resources that could help me get the 750/650 installed in my Carenado 1900d and Cessna 208? Have searched around and could not find much to help a novice like myself. Any help would be appreciated. Thanks! Ken

Hi, I am interested in purchasing the GTS 750/650 combo. I just have a question. I know that the units do not support Navigraph updates. How do I keep the units updated to the latest cycle info? Is this a complicated process? Thanks for your time.

Jean-Luc. I just installed the updated Xenviro 1.07 and now the 750 will not start and has a black screen. I have tried reinstalling the 750 and restarting the computer and still no luck. Also, toggling the Battery & Avionics switches on and off didn't help. I even tried taking out Xenviro and still have a black screen Thanks, Howard

Hi, I'm pleased to announce v2.4.7 Release Candidate is now available! This update includes stability and performance enhancements, and corrects all known issues to date. Please make sure to post your feedback for this version in this thread only. Once we get enough feedback, this will become an official release through "Check Updates..." Download link for both e-commerce installers

Greetings. I've been scouring these threads trying to find a solution to a vexing problem re the use of the 750. Expert help greatly appreciated a this point after far too much trial and error! Had it running fine, then installed Carenado Baron + REP. Found need to start tweaking and something is now clearly out of whack. Issues/questions as I identify them: 1. Does the plug-in for the Carenado install to its own folder or should it work off the X-Plane 'general' one in root folder. I use latest ver. of XP11. 2. How do I completely uninstall the RXP GTN 750 prior to a re-install? Is it more than delete ProgramData folder plus the plug-in? 3. I …

Hello, when I do the approach and am just over the runway I get a missed approach / waypoint box on screen. What am I doing wrong, it doesn't give me the chance to land before saying go around.

I'm using (well trying to use) the GTN750 as a popup in the Carenado Baron 58 with Simcoders Reality Expansion Pack. This is the scenario what is happening (GTN750 power is tied to Avionics Master in the settings): I end a flight shutting the plane down, so master avionics off, battery off I start a new flight (whether X-Plane is shut down and restarted does not matter the scenario remains the same) I start up the plane, battery on, start the engines, then switch the master avionics on (exactly in this order) I press my hotkey to open the popup GTN750, (or click display window from the plug-in menu) and the pop-up window appears. Howeve…