PMDG 777

Dear PMDG, long time ago i asked for a possibility to choose different seating conifgurations and capacities. You told me that you wanna try to realise the ability to choose different seating capacities and configurations for each different livery. Is it possible that you implement this kind of feature in SP1c? I know: Weight is weight, but this would a "nice to have". Have a nice day!

Hello! Please tell me how to configure disconnect A/T ARM with one button? Thank you!

Hi guys, I'd like to install the PMDG T7 with an external autopilot (MCP). Unfortunately, the SDK from PMDG is not complete, does anyone know a solution? What cards would have to buy, so bringing the PMDG 777 with the autopilot or radio panels to run? at the moment I have a Arcaze USB module, unfortunately that does not at all

Hi, has anyone managed to get the reverse spray effect by Edward Cox work on the 777? I tried but in order for it to work I need to press "I", and the smoke will stay on forever (even after stowing the reverse), unless I press "I" again. Thanks.

Hi all - I picked up the 777-200 right after the first SP was completed in August. Once the SP1b came out I updated but it appears that after I did that I lost my FCOMs, FCTM and QRH. The Intro and Tutorial are still there. If I try to go though the Ops center to access them it states that 'This page cannot be displayed'. I checked in the 'Flight Manuals' folder where the pdf's should be residing and they are not there. I searched the entire computer as well as my recycle bin to no avail! My guess is that I have to reinstall but I'm hesitant to do so. It's working great and I have Ezdok and my hardware set up and working nicely. If I do reinstall, do I have to unin…

Hello, I have noticed lately that when saving a 772/3 flight with this ; button in fsx, the FMC does not load back. The plane loads where I saved it, but the FMC is empty so to speak. I have to re enter all the weight and waypoint etc. I used to load the plane and FMC back. I normally save over pevious saved files with no problem. However once I noticed the FMC not re loading I deleted the old saved files. Still save the plnes but not the FMC, autopilot or anything. Anyone have this happen, if so what did you do to fix this? Thanks Mike

Random as I am flying when I turn to the Spot view I will notce that non of the light are working anymore, the engines aren't spinning but I still keep cruise speed etc. Also there is two random cones hanging from the top of tail and from the stabilizer. 1) why does this happen? 2) how do I stop/ control? 3) Any other insight would be great Thanks Brandon Card

http://www.simflight.com/2014/09/11/pmdg-777200lrf-sp1-review-interview-robert-s-randazzo/

Hi all, Is there another way to get the new upgrade Version 1.10.6061 [777-300ER] as my Operation Center is telling me there is a new version available for my 777-300ER but everytime i hit the download button, nothing happens? I apologize if this has been noted before. thank you for your time and help. kind regards Andrew

Has anyone given this new version a try? http://secure.simmarket.com/toper-calculator-tool-b777-v3.0-(takeoff-performance-calculator).phtml

Hello, I want to load a script to use my MFP to control some functions and switches in the PMDG B777-200 and need some help at locating what I need to get this started. I have looked at the SDK.h in Notepad and have found the values I want to use but am a little, or allot, unclear on how to use these to program this device. I use these values to program my VRS Super Bug in FSUIPC, but do not know how to do this in PMDG. I have started to build my own home cockpit for the Super Bug and use FSUIPC to link those switches to FSX through FSUIPC and I use the key commands to control the MFP to operate the DDI's in VRS. This, using key commands with the MFP for simplicit…

Hello, I have been getting 'config stabilizer' warning on takeoff recently. Then after I did some tests on the ground. I noticed that whenever I increase throttle, STAB value immediately decreases to minimum (shows -15 in FTCL), and whenever I decrease throttle, STAB immdediately jumps to maximum. It seems that somehow that vertical stabilizer is controlled by my throttle input. I have checked my control setting and they were all in good order. I have also tried re-installing PMDG 777 but it did not solve the problem either. At this point, I am running out of ideas and I would love to hear your suggestions. I do have FSUIPC installed for using other add-on pr…

Hi All Ok started at Cold and Darkl. Applied external power. Go to doors page 1 is says ARMED ARMED OPEN ARMED ARMED ARMED ARMED ARMED Page two All closed They used to work OK, no nothing Any ideas Thanks Clive

Hello. I have a licensed PMDG 777 copy with the extended download service. Date Processed: 6/28/2014 Yesterday, after my pmdg ops center told me that there was a pending update, i installed it. After that, i reupped the liveries and i tried to make a test, and i found the aircraft, in any livery, was showing with no landing gear, fan blades and no VC interaction. I installed as Administrator and my specs are as follow: FSX Windows 8 Pro Edition (64) Nvidia GeForce GTX 770 Intel Core i7-4770 @3.4GHz 32GB Ram

Gents, I know this might seem like a weird request, but I have been looking for this thing for months. Literally months. Air Canada has for I think most of their aircraft a "Quick Reference Handbook NORMAL" book. No, it's not the QRH that comes with the 777 that's for abnormal procedures. I'm looking for the "normal" handbook - it's a 40(ish ?) page document, outlining a bunch of of standard procedures and checklists. As an example, what to do prior to oceanic entry, proper procedure for securing the aircraft for de-ice etc. It looks like a fantastic document... But, I can't find it. Other airlines might have these too, and if anyone could send one to me, I wo…

Just got the T7 the other day. Today was the first day to fly it. KBOS to EGLL. 30 min into the flight it froze. Still had sound. Tried again and 39 min into the flight it froze again. I was running ASN and UT2 at 40%. Checked the forums and tried the fixes but still no joy.

disregard....dubble post

Considering that the weather radar detects rain droplets, if I am on the ground and shoot the radar beam ahead with tilt 0 (thus about 5-6 meters above the ground, considering the height of the 777 radome) while it is raining, will I get radar returns?

Hi had a look through the documents but couldn't seem to find the answer, I'm sure it's right in front of me. How do you start auto time compression with the digital clock? Was a right click on the analog clock but now that there's no clock where do I click? Galen

Hi, I upgraded my computer with up-to-date hardware and reinstalled FSX and the 777. No matter what I do, either with uiautomationcore.dll (tried at least 3 different versions) or without, when I quit FS I get a CTD with the fatal error message once every 3-4 times. Any recent advances on what may cause this? Is it something unavoidable with the 777? Thanks.

Is it only me or there is a little problem with the 777 outer/midder marker sound? The outer marker tones are not equally spaced at times, some are slightly shorter, a kind of jerkiness, same for the middle (don't know about the inner, not used in my area). Anyone experienced this? Thanks.

Flying EGLL-WSSS today, I encountered a rain storm over southern Thailand. I managed to skirt around the biggest storm and continued my journey successfully. I had wondered how severe was each of the radar returns indicated. How deadly is a red return? I found an article that others may find interesting. Cheers, Richard

Hi everyone! I have a problem with the ils approach: ils pointers and "diamon" don't appear and i'm not able to do the approach.Sometimes LOC button illuminates but the localizer diamon does't appear and the APP mode doesn't work. The ils FREQ and the curse are correct . Any ideas of what it could be? Regards. Thank you. Stefano Colombo

Hi all,since installing the service pack for the 777 i cannot trim up using my ch yoke, i can see the trim switches working in the VC but it will not trim up to set trim for take off.I can move the trim lever by clicking it to set the trim.There is no problem in the ngx, md11 or 747 so it is not a problem with my hardware,any help would be much appreciated Gary Stallard

my problem is ever since I installed the Sp-1 update I no longer have external views through my joystick and what views I manage to get are skeleton views of a partial say 15% of the view