C90B King Air HD Series FSX | P3D

Backup first obviously in case you want to revert back. If you think the gear lights are a little too close change the three "10.0" values to 10.5 and it will move them out a little. Panel.cfg Add to: [Vcockpit01] gauge10=shockwave_lights!SW Lights_gear, 1,1,1,1 //shockwave light Aicraft.cfg Add to: [LIGHTS] light.5 = 5, 10.0, 0.6, -1.70, fx_shockwave_landing_light_narrow_no_flare // Shockwave light light.6 = 5, 10.0, -0.6, -1.70, fx_shockwave_landing_light_narrow_no_flare // Shockwave light light.7 = 6, 10.0, 0.0, -2, fx_shockwave_landing_light_narrow_no_flare // Shockwave light light.8 = 7, 0.1, 23.2, 0.8, fx_shockwave_landing_light_short // Shockwave …

I have created several repaints for the C90B, but am having an issue when I create them as variants of the plane. For my initial repainting, I simply made a backup of original files then replaced the 7 files (CNA_1.bmp to CNA_7.bmp) within one of the original variate texture folders (i.e. replaced the files within the "Texture.Silverblue" folder). This worked great, as seen here: I then went to create new variants, by editing the aircraft.cfg file and adding new [fltsim.#] entries, etc. The last default variant is [fltsim.6], so I created a [fltsim.7] and properly named the variant to go to the correct newly created texture folder. Everything in the new fold…

Hey all, I have a problem with my C90B and TBM 850 HD aircraft; when selecting my altitude, heading or course bugs on the ground on either aircraft it functions normally. However in flight, they all are selected in an increment 10x what they are supposed to do; heading bug moves in increments of 10, the hundreds knob in the TBM 850 moves in thousands, etc etc. Any thoughts? I'm using Saitek x52s. Callum

For those that may be interested, below is a reply from Carenado re fixing the ENG AUTO IGNITION lighting bug with engines running: Greetings, Thank you for your valuable feedback. We'll consider if we can include it as a modification on a future patch we might release for the aircraft. Regards. Carenado Team. ------------------------------------------------------------------------------- Les Parson, Feb 11 01:42: Hello Carenado. I have a special request for FSX Beechcraft C90B King Air - The ENG AUTO IGNITION lights (on front panel) are only on when the engines are NOT operating. Can you make the change to fix these lights to operate with…

Edited : sorry, double posting Jean-Jacques

I recently wanted to take up the Citation again (version 1.08a) and...it ended up by crashing fsx. FSX reported the Flight1_GarminG1000_510.GAU as the faulty module. I searched F1 Mustang's support site for a solution and the only one that worked was a suggestion by sky guider to use a clean fsx.cfg (http://mustang.flight1.net/forums/crashes-when-selecting-aircraft_topic3021.html) I thought this could only be a temporary solution and I searched for the culprit within my fsx.cfg, as the Citation used to work flawlessly before. I found two dll's from Carenado that, when disabled in the fsx.cfg, would allow the Citation to load without crashing. These are the CarSound…

Hello everybody, maybe some will recall the nice discussion about proper sound pitches produced for FSX addons, and this time again it looks like the prop sound pitch and turbine sound in its correlation again are not correct for this new release as you can hear and see in the YouTube video, it gets very obvious at about 6:00 mins in the video at approach, Power to Flight-Idle ... turbine AND porpeller sound-pitch decreases: Again as in the other post, I don´t want to flame any developer here, it is just a bit sad these things won´t be taken care of these days :Liar: ...

From the aircrafts I've been flying so far, I;m used to lean the fuel flow on the fuel flow meter. However, in the C90B the mixture-, or condition lever doesn't seem to have any effect on this gauge. How do I know the right setting for this lever?

I notice that this aircraft has some troubles with the text on the mouse-over labels. For instance, the prop sync label doesn't mention if the switch is in the on or off position. And the text with some buttons and switches is not correct, when compared to the aircrafts manual, for instance, the prop feather switch sais: on-off-on, while this should be: on-off-arm. And there are more that aren't right. Is there a patch or fix I can apply to fix this problem.

I cant seem to find the FD-button in the cockpit. Would someone be so kind to tell me where I can find it?

I have the RXP430W and I want to know how to crossfill the flight plan from the 430 to the Avidyne MFD display is there a way I can do this?

To continue The Jet Prop thread CoolIP started... Now for the C90:

I am wondering if there is a way to get ride of the yoke. Would be great if someone has the solution. Thanks jean-pierre

Has anyone come up with a fix for the fuel system...there are (4) tanks on the real C90B. When I select between main and aux on the fuel panel to the left of the pilots seat it only shows whats in the two tanks programmed to the airplane. Has anyone come up with a fix to include the (4) tanks and the ability to switch between main and aux? Thanks, John

I am using the C90 with Prepar3d V1.3 and the overhead panel light switch for avionics, engine instruments and Pilot flight instruments does not work. I get no lighting on these surfaces and have to resort to the Master Panel light switch to see the instruments. Does anyone else have this problem?

Does anyone know if the Flight1 download includes the latest patch for the C90? It says version 1.0 on the flight1 page. Thanks, John

Sorry folks but something is really annoying me. Been simming for years but for some reason my brain can't work this out. Bought the C90b a few days ago as I am slightly tired of the PMDG stuff for some reason probably just overkill... My issue is ....my home airport is EGLC (London City) when I first used the King Air I thought I would do short flight into EGLC to see how it flys. Thought I would test out the garmin 400 (which seems woeful) and went to PROC to select the ILS approach into EGLC for some flight guidance. All I see is the sub box within PROC showing ILS rather than ILS28 etc :unsure: I can select just the word ILS but there is no idea of which r…

Forward: This is not a complaint. I loved this plane before and after the SP.. This is merely personalizing to my tastes and posting in the chance someone else may enjoy it also. I wasn't a fan of the ambient light. For `me' it was distracting and I also didn't like how it shined on the inner wings near the fuselage. If you want to disable the ambient lighting // out the first light entry in aircraft.cfg.. Should look like this. [LIGHTS] //Types: 1=beacon, 2=strobe, 3=navigation, 4=cockpit, 5=landing //light.0 = 4, 0.65, 0.00, 1.00, fx_vclightcarcn light.1 = 4, 1.90, 0.00, -0.50, fx_vclightcarcn0 light.2 = 10, 1.20, 0.00, 2.90, fx_vclightca…

Title says it all. I also re-downloaded the latest installation from the Carenado site today. I presume it also includes SP2 in it (links to SP1 and SP2 show "Exp"). Reinstalled everything but still no luck....weather does not display in VC. Thanks

How do I set cabin altitude to over 10000 ft... ? That is as far as I can go...!? Thanks

Is there a way to move them together ? I currently move them one by one...creates a lot of yaw as you can imagine .... Thanks

When I start the engines torque goes way into 1400plus..After a while it settles down to 200s and 300s. on idle. I am presuming this is normal. If not, what can I do to avoid this ? Thanks

Hello everybody, on my now mid-range PC the Avidyne Unit is the most power hungry and FPS killing gauge in the C90B and also is in the B200. If I completely powered it off in the vc and 2D gauge then I have a very fluid and pleasing experience, back at "full FPS" in my case, so I decided to cut it out and replace it with the RXP Wx500 device, which gives still a realistic look and feel to the panel .... and besides of the Avidyne own Wx-radar , it shows allways the weather in my case. Carenado, I really like your Avidyne Unit, but for me it is a fun killer to see frames be cut by 10 FPS when using it! This is just an idea how to get some of the performance ba…

Download link: http://www.mediafire...4vsuwk4fm9xyqws Installation: Make a copy of your "textures.common" folder. Copy the files in the zip into your "textures.common" folder and over write when prompted. This only replaces 6 textures but it's just easier to backup the entire folder. What is does: Gives the cockpit a slight lived in look by adding finger prints, dust, smuges, and light wear, (very sparse) where needed. What it doesn't do: Make a promise that you'll actually like it or think it's even good. Most of what I do is for personal taste and not public opinion. :) Examples, hard to see some of the changes in these but figured I'd at least post the…

Hello, I am thinking about purchasing the XP530 for my C337 and C90B. But first, I would like to ask, is it possible to replace the Avidyne in the C90 with the XP530? Or if not, would it be able to use the 530 as a pop up when clicking on the supplied 400? Any tips on how it is done would also be appreciated. Thank you in advance and all answers appreciated. B.