The Prepar3d Forum

i recently changed my graphics card drivers and now i have jagged squares near all of the shore lines. never had this problem before. any ideas?

I'm considering this one, so I would welcome opinions on it. Looks very nice in the screenshots. Does it have animated jetway's of some kind..?? No mention is made of this in the product description. The lack of animated jetway's, preferably SODE, but default CRTL+J at a minimum, is a deal breaker for me. Opinions and info are appreciated. Thanks.

So Project M wrote me about maybe how to fix my problem with not being able to program lets say the AT disconnect button. I am using P3D, PM GC and PMsounds, PM MCP software with CPflight MCP hardware. Can someone in plain english tell me just what to do from what they are saying below here. Where do I get the offset lists for PM and or what do I do with this Ox4Fs value 99. I have never used offsets. Thanks Randy, You need to select the PM offsets from the list, not the FS autopilot offset.Or write to 0x4F2 the value 99, which is a universal AP off command. PM team

I got white buildings and trees since ive installed tomatoshade and reshade, what did i wrong? Sending some pictures too

the normal (usual) pattern that LM follows for their point releases is three to four month and some times with advanced announcement (as we saw with V4.4 release), we knew that V 4.5 was in the works for some time and most of the outcome is fixes and fine tuning, today is 28 Mar (4 months) after last release with no leaks or announcement yet, what do you guys think? how much longer that we need to wait for next point release?

Hello, I was having a hard time to find proper search criteria for this so I thought I would ask. For the longest time I am having issues with click spot location in pop up windows in P3D. Every time I fly it can be different. I use the GSX and AS-P3Dv4 on every flight. Here is what happens. I load up P3D and start preparing. In the course of preparing of course I open up the GSX window. This opens the semi transparent dialog box. Now when I hover over a certain item, the actual selection I make is one or two items above/below where my mouse currently is. And since the color change when highlighting an item is almost imperceptible I end up choosing wrong things. It d…

I have posted on another thread with no answer. i would to purchase zspd so I thought ide start my own i have read and also seen on YouTube Video that zspd imaginesim P3d v4 that there is texture bleeding and overlapping only around the outer perimeter of scenery. is it compatible with envtex orbx vector or global thanks in advance mike

Greetings friends. I was hoping someone might have a solution to this problem. I'm mostly a heli pilot in p3dv4 and have several that I absolutely adore from nemeth and cerasim (Cera's 222 in particular). However, I have this horrible phasing issue when panning view in the external aircraft spot view. Does anyone know of a solution for this problem?

The speed of ai vehicles (cars, trucks, ...) is too high imo. AFAIK there are two ways to reduce speed. The more general method is to reduce "<FreewayTraffic TrafficSpeed="100"> to a lower value in the LWcfg.xml. The other method is to modify each vehicles speed in the corresponding sim.cfg in SimObjects\GroundVehicles folders. Does it make sense to modify the settings using both methods or is there a tool which can do this. Who has some experience with lowering vehicles speeds?

What do you think happened to this? In the preview screenshots it looked great. I wanted to buy it. Started one or two years ago? Do you think it caught up in Otbx's underestimated manpower resource demands for their TrueEarth regions?

ELITE XTS IFR training desktop simulator using P3D visuals… Not my setup - got it from Youtube... https://www.youtube.com/watch?v=JbkJ9-aSLdM https://www.youtube.com/watch?v=shOywsCZ6hQ

When I first installed P3D last week, any daytime flights to extreme altitudes showed, as expected, a darkening sky, tending to black as the altitude increased. I have now added SkyForce3D, EnvTex, EnvShade, ASP4 and ASCA to the installation, and now I don't get those desired black skies - now they are dark blue, and not that dark either. Any ideas what might be causing the difference? I believe I'm configured for: SkyForce3D - cloud textures EnvTex - other textures apart from clouds EnvShade - Shader stuff ASP4 - Weather engine ASCA - I assume this is still doing cloud structures? I should add that I was using PTA for a short while before…

Really love the Embraer 145 regional jet since I'm often a passenger on one in real life. Are there any of these jets available for Prepar3dv4? Thanks. Stan

I installed it, but it looks like this does someone know how to fix this?

Would like some opinions on the Aerosoft Prague P3D v4 airport scenery... The good, bad, and ugly...😁

I have recently installed this scenery, and I like it very much, but I have one problem, The Salzburg Castle is flying 10 m above the hill. I have ORBX Global, EU and GS installed. I have tried to disable some .bgl files, but it don't solve anything. Does anyone have some advise for me? Tor Arild

Hi when I try to install just flights dc-8 into p3dv4 i get this error message I have looked around and it seems to be a common problem Some of the answers have been to rename the installshield folder in c/program files/common files, but that folder is nonexistent for me. I have also done the usual (turn off antivirus, make sure no other programs are running, run it as admin) but no help. I also have this problem with justflights other products. Help is much appreciated. James

I am running 4.4, and the built in Falcon as well as Flysimware's DA50 (both use PBR) do not render external textures completely. I have run both the client and content installers; in the control panel I show 4.4.16.xxxxx for both. I have also re-run them, deleted shader files, and restarted my system... what else can I do ?

I read about external hard drives like the WD small portable ones and I was wondering how they work in relation to P3D. Can you move scenery and ai planes to the external hard drive to save space on the computer? If so, then how is P3D able to "see" the scenery and use them in the sim. Do you have to plug in the external hard drive into the computer each time you want to fly?. I don't want to buy a new computer but with the large size of sceneries nowadays this could really come in handy. I am just not very computer savy and I just heard about this today. I have an external hard drive that I use to store files but I didn't know it could do more than that. Thank you very m…

We need it sloppy everywhere around the World... And, if possible, also Airport-updated.... Heck,my little LPMN is in ELITE now, and in XP11... Nothing No NADA in P3D... I'm tired of Flatness :-) But don't overdo it guys... sometimes it can become ridiculously sloped ...

, Hi all, been off this site for a bit building up my 737 P3D link trainer. I use P3D v4, Project M GC, PMsounds, Sateik Panels, and CPflight MCP unit. I can't seem to find a Project M forum (where would that be?), so I thought I would post this here for now. PM staff helped me set up and fix some PM MCP/CPflight hardware problems, but I have 2 main problems right now. One is I cannot ( after auto loading, PM MCP with CPflight MCP hardware auto starting as well) the AT or AP disconnect buttons thru FSUIPC. Before I had loaded PM MCP software, I could program these disconnects thru either P3D controls or FSUIPC. I am running for now the P…

I use P3D 4.4. incl all ORBX Products and Pilot Ultimate Mesh 2018. After installing WSSS and starting the sim directly, everything ist fine. Layers and buildings seem to be okay. After that test I closed P3D. If I start the sim with SimstarterNG, I do have scenery Issues with WSSS (Imaginesim). The standard main airport building is showing in front of the 3rd Party WSSS Imaginesim Scenery and does not want to dissappear. I use the latest updates on all products. In SimstarterNG I use the scenery.cfg fresh "imported" or "created" from P3D without any changes. But it doesn't matter at all. Tested this with changes and without them (enabling/disabling, row up, row down…

Why my ATC module don't change the status from Standby to XPNDR in IVAP? under FSX environment works correctly, after change to P3D v4.4 only partial functionality occurs. Opencockpits hardware based on SIOC, FSUIPC PC Master - WIN10, P3D v4.4, Ifly CBE, Ivap (master) PC Slave1 - WIN10, Ifly Client PC Slave2 - WIN 7, Ivap Client - PROBLEM Installation and connectivity without problem. From hardware and Ifly is possible: - tuning of transponder - OK - tuning of frequencies - OK Problem: - change the status from STBY to XPND - change the ident status (IFly works correct as programed by SIOC and FSUIPC offs…

Try HT ON , made THE differents on my system. Totally Michael Moe

Is there a P3D Registry editor similar to FSX/FS9 Registry Repair Tool, please?