LINDA Support

Hi there, Can you please direct me how i can assign one single key on joystick to control multiple functions/actions? Thanks a lot

Hello, since the last update I am not able to deactivate the Actvie/Standyby Button on the Radiopanel. I have deactivated the Panel in Settings > Setup Joystick > Pro Flight Radio Panel > no hook on Enabled. Bud the button keeps switching the frequencies. Where is the error?

Wrong action file in the zip file of version 4.15 The file is version 4.13 from 21.11.2019 Please check. Thanks

Hi all, I am attempting to read the Radio Altitude offset (0x31E4) and used the tracer to look at the output values. However, for any given altitude, the output values vary by tens of thousands as they scroll up the console. This variation suggests that it will be very difficult for me to read a value and instigate an action at a given altitude. The offset status list shows this offset as a 4 bit value. Is there a solution to this? Is there a better offset I can use? I'm very puzzled. Thanks in advance.

Hello Andrew, it's me ... again.. 😂 The downloadlink for your new version of the CRJ (1.7) is to the ver. 1.6b. This time I hope I'm right xD Best wishes Charly

Hi guys, I've previously installed the v1.4 of the NGXu Module into LINDA (running 3.0.12 if that's not an issue + FSUIPC 5.153). I made sure my previous NGX module is updated to 4.14 prior to the update and installed it according to the instructions - All of my NGX assignments were successfully transferred to the NGXu profile without any problem. Nevertheless, despite having everything installed correctly many of the programmed switches don't seem to work whatsoever, and those switches working prompt their response in a 5-10 second delay. I have no idea what seems to be the problem. In the old NGX everything works properly, I only have these problems in NGXu. …

Hello, fluff friends, I am in the process of adjusting my LINDA settings for my installed NGXU,to match the version NGXU 1.4,Current FSUIPC has been installed My new NGXU I have installed under H:\P3Dv4.1-Sim\SimObjects\Airplanes, there is also the NGX stored! To install the module I follow these instructions, 1)Download the zip file and expand it to a suitable accessible place (e.g. desktop). 2.)Open LINDA and make sure that the aircraft selector is not synchronized with Sim and --Aircrafts-- is displayed 3.)Click on the option Maintenance = Maintenance. 4)Under Import Aircraft Module, click Select Source Folder and locate the folder PMDG_737_NGXu_v1_0. …

its som missing button assigments , BC, 1/2 Bank, VNAV, Push to cancel (ALT knob) , Push direct ( CRS 1 knob) , CRS2 . very pleased with your work . here is a pic of my homemade MCP for CRJ runing Linda. https://www.dropbox.com/s/sbbf2kksrs34g4g/20191213_213119.jpg?dl=0

Hi, I managed to configure buttons. Is there anyway to show (green dot) light on/off while funtion is activated ??

Hello, you have in a routine a "r" to much typed (marked as a big red bold one) function AB_FCU_Display_Lights_inc () lvar = 'AB_GLS_IntLight_FCU_DISPLAY_Rotary' lvarl = ipc.readLvar(lvar) if lvarl < 20 then lvarl = lvarl + 1 ipc.writeLvar( lvarr, lvarl) DspShow('FCU', lvarl * 5 .. '%') end end best regards Charly

I deleted the Aerosoft A3XX Pro folders from 'linda' and 'linda-cfg' from the previous beta installation, and installed 1.6, but nothing works. LINDA is showing 'Aerosoft A3XX Pro in the orange 'Sync to Sim' box, but moving things on my devices is having no effect. I attach the log in the hope that you can point me in the right direction. PLEASE DO NOT PASTE LOGS INTO POSTS. IT MAKES ANALYSIS IMPOSSIBLE AND WASTES SPACE. EMAIL TO LINDA @ awginfosys.net.

First of all, great tool!! Thanks for the good work. I have a problem with A3xxx modules: AB OVH Integral Lights faulty A320 without function A333 is OK. I think since 1.5, can you check it? Thanks

For some reasons, when I turned the knob of speed, heading and Alt of my VRI FCU, the reading is jumping. Please advise where I go wrong. Thanks Video: https://youtu.be/Gk0WJqzo_EM

Hello, i want to use the MCP-II/Boeing Type v1.100 from VRinsight in conjunction with Linda. Unfortunately I can't establish a connection with the flight simulator (currently started the PMDG 777-300) and Linda. My system: Win 10 und P3Dv4.5. Who can help me please ? Thanks in advance. Best regards Claus

Hello Andrew, The new download link is wrong. The link in the forum is right (hxxp://www.awginfosys.net/LINDA/Downloads/Aerosoft_A3XX_Pro_v1_6.zip) but the download is ver. 1.5 Best regards Charly

You have combined all the Aerosoft Airbus Professional modules together. This is fine and OK for the 318 t0 321 modules as they all use exactly the same functions. However the A330 has different functions for some of its requirements. This is causing a problem to me when trying to allocate functions to switches. With a limited number of switches available, it has become necessary to allocate a different function to the same switch depending on which aircraft is being used. How did you envisage the method to be carried out to do this? I saw your answer about using the user.lua file but when I clicked on EDIT I did not see an EDIT USER button and couldn't see how to c…

I posted this in someone else's thread so might not have been seen. There is a bug in v1.4 of the NGXu module described below: The reworked MCP2 display has a bug. It is displaying the following: During climb in VNAV mode: N1*to Dest: 0 nm At top of climb it switches to: SPD to Dest: 0 nm I did have a flight plan loaded in the FMC.

Stupid question time.... I've noticed there are several commands which use the 'show' instruction. For instance on the A2A Spitfire you can assign 'SPIT Primestate show'. When I assign this command to a button I don't see where the primer state actually shows on screen? Thanks for the help in advance!

Hi all, I had a crazy thought the other day about using LINDA to change the weight value of a particular payload station in FSX. The offsets list has an entry (0x1400) and using the tracer, I could read by default the value of the weight at station 1. However, reading from the offets list, I do not understand how to interogate any subsequent station so my first question is how do I trace 0x1400 station 2 or 3 etc? Then I thought about using 'ipc.write' to change that weight value but 'ipc.writeDBL(0x1400, 200)' didn't work. I get the feeling that actually, you can't write values into FSX using this method but I wonder if there is a way that someone here has eith…

215/5000 Hello, does anyone know how I can do the frequency swap on fslabs? com1 <-> com1/sby. I can not find any LVar, offset or control to swap the frequency, and I can write the value of com1/sby to the com1 offset, but I can't write anything to "com1/sby" offset. any tricks or clues how can i solve this? Thank you in advance. Framac

Hello everybody and a happy new year! unfortunately I have discovered two more small mistakes during my tests. In EFIS Capt and FO both\FD both\VC_GSLD_BOTH_EFIS_FD_on and VC_GSLD_BOTH_EFIS_FD_off as well as VC_GSLD_BOTH_EFIS_LS_on and VC_GSLD_BOTH_EFIS_LS_off. Contained now: FD: function VC_GSLD_BOTH_EFIS_FD_on () VC_GSLD_FO_EFIS_FD_on () VC_GSLD_FO_EFIS_FD_on () end function VC_GSLD_BOTH_EFIS_FD_off () VC_GSLD_FO_EFIS_FD_off () VC_GSLD_FO_EFIS_FD_off () end LS: function VC_GSLD_BOTH_EFIS_LS_on () VC_GSLD_FO_EFIS_LS_on () VC_GSLD_FO_EFIS_LS_on () end function VC_GSLD_BOTH_EFIS_LS_off () VC_G…

An die Programmierer. Ich habe einen kleinen Fehler in den FSLabs A320 bemerkt. Unter dem Punkt ADIRS - ADIRS1 wurde ein V vergessen zu schreiben. Hier: Funktion VC_OVHD_ADIRS_1_att () local SwVar = "VC_OVHD_ADIRS_1_Knob" local VarInc = 72001 local VarDec = 72000 local SLT = ipc.readLvar (SwVar) wenn SLT = = 0 dann ipc.control (FSL, VarInc) ipc.sleep (10) ipc.control (FSL, VarInc) elseif SLT == 10 dann ipc.control (FSL, VarInc) end VC_OVHD_ADIRS_1_show () end Bitte ändern Sie dies in den nächsten Versionen. Danke und ein frohes neues Jahr benne To the progra…

Taxi light is invalid， VC OVHD EXTLT Taxi on VC OVHD EXTLT Taxi off

Scot, tried to DM you about coolsky dc-9 and it said you don’t accept messages. DM me if you need a copy or if it will break the newest version of LINDA. best,