LINDA Support

Hi guys I have linda v3.1.1 with my VRinsight FCU with my FSLABS A320, sometimes when i run my the sim starting to prepar my flight when i come to use any button or knob in my FCU it doesn't work until i restart my sim despite i get the message that my fcu ready to use and when teh sim loads i get linda message that it is loading the profile don't touch and button or knob then it becomes ready, despite of that my fcu not work until i restart my sim again !! Could anyone tells me away to reload my linda app and its settings without getting my sim restarted ?! Thx

Hello, I just updated my version 3.0.12 to 3.1.1.4 and I can no longer save the linda-gui.ini with the following options: Developer mode ticked Associate with * .lua ticked Debug mode Detailed GUI and LUA When launching Linda the advanced parameters are reset to default values. Bad update from me? Thank you in advance for your help. Regards. Francis.

How can I set up my landing gear on my saitek swich panel using pmdg 737ngxu

Dear All, Sorry for starting a new topic if the question is discussed elsewhere, I haven't found it. I would like to ask whether it is possible to read the information light states via LINDA or FSUIPC or anything else. I mean for example that I would like to read whether the APU start button light is ON, AVAIL, or OFF, and with this value I would like to make a program for some kind of hardware to control an LED appropriately. And of course if this works, the same for the other lights. Thanks for the answer. Best regards, Adam

Hi, I'm looking for the old A2A P40 Module, I can find it via a google search , but the download does not work anymore. A2A is offfering the P40 P3D Version for free right now and I expect others to grab this wonderful plane as well. I don't get along with the A2A Input configurator because you have to enable controllers in P3D (creating all sorts of problems using eg FSUIPC at the same time). Is the module still available or do you think it is unsuable in the P3Dv4.5 environment anyways? Thank you for your awesome work! I use your modules a lot. Kind regards chris

Hi, I receive this pop up window during a prepar3d v4 flight. I am using Linda 3.0.1 My keyboard becomes unresponsive and sometime VRi Combo II or Seitek controls. Any advice? Thanks Dave

Hi, I enjoy using Andrew’s Linda 787 config. Some functions are missing and I would like to ask is it possible to had them ? For example: MINS setting ? Currently, changing form BARO / RADIO available but setting MINS is not configured. FPV setting, I managed to copy paste same function from MTRS but FPV wont come on unless clicked first on aircraft itself the function is available... 😕 Thanks again for your work. Appreciate any assistance. Ittai.

Hello I have assigned my contollers switches and buttons to the specific actions for the PMDG 737NGX. I now wish to copy the same assignments over to the PMDG 737NGXu. I have the 737NGXu module in place, how do I replicate the switches and buttons from the 737NGX to the 737NGXu Clive Alexander

LINDA_3_1_1 4 P3D 4.5.13.32097 Hello, everybody, When I start P3D and the IVAO_MTL simobjects are loaded the startup process takes about 2.5 minutes. In this case I get an error message 9 errors occurred while saving the aircraft configurastion Block=1, Line=0,Key ={IDEN},Line=empty Block=1, Line=0,Key ={IDEN},Line=empty Block=1, Line=0,Key ={IDEN},Line=empty Block=2, Line=0,Key ={IDEN},Line=empty Block=2, Line=0,Key ={IDEN},Line=empty Block=2, Line=0,Key ={IDEN},Line=empty Block=3, Line=0,Key ={IDEN},Line=empty Block=3, Line=0,Key ={IDEN},Line=empty Block=3, Line=0,Key ={IDEN},Line=empty .. as shown in the picture. https://pasteboard…

Hi there, I know Windows ans FSUIPC are limited to recognise more than 32 buttons per device. How is it with LINDA? Are there any limitations? Could I use a Leo Bodnar BBI-64 Button Box Interface and would LINDA recognise all buttons? Thanks 🙂

i install FSLabs_A3xx_v1_4 and try to use macro for MCDU but it is not working can anyone please help me out what is wrong? Assigning button to macro for PMDG 737 is working fine

hello everyone, I just installed the new PMDG 737 ngxu, so I installed the module corresponding to the aircraft precisely how the new version 3.1.1 linda, this moment I have a problem, linda launches well but my mcp does not communicate with linda while the eve everything worked perfectly with the old 737ngx. can you help me ? thank you in advance

Hello, When i close my Flightsim (P3Dv4.5), LINDA does not autoshutdown. even when i choose yes in the LINDA settings: "start GUI with Sim" The LINDA console message is: Closing seesion:waiting for Dllstop to be called. it only happend with PMDG737 NGXu. and i deleted the older PMDG 737 modules, so the only module is the PMDG737 NGXu. LINDA version is 3.1.1, and NGXu module is 1.4. i hope someone can help me. regards, Alex

HelloI'm on windows 10 with P3DV4 with in module: Fsuipc5,Linda 3.0.12.811, to operate FsLabs A320.Until now I had Linda who was visible at startup, which allowed me to make additional adjustments. I no longer have access to Linda even by going directly into the P3DV4 module file, when I call the Linda folder, I can see the Linda window in blue appear then nothing.Can you help me please?Thank you in advance

Hi Scott, When I recently updated to Linda version 3.1.1 from my previous version of Linda I found several but not all of my switch and/or button assignments stopped working across several aircraft. When I reverted back to my previous saved "Modules" folder all was well. I followed the process of copying the new Module folder into the P3D folder and accepted the overwrite of the new files as I had done in the past and it always worked flawlessly. After some investigation of the issue and looking at the files that were overwritten I found the update overwrote my "lib-user.Lua" file and therefore all my custom Lua user files no longer worked. Once I…

Fixed! I can save my button assignment for the Piper Comanche, but not for the spitfire. I tried reinstalling the spitfire linda modules and checked ownership values. Even tried running Linda as admin. I'm running Win10. Having run out of ideas, I thought I'd see some help. Maybe I should mention that there are No entries in FSUIPC specific to the Spitfire. Not sure why. Log said that it couldn't access/open the config-hid.lua file. I deleted said file and Linda created a new one that it can access.

Hello I have the PMDG737NGX module installed (v4.15) When I click on SYNC TO SIM it reverts back to AIRCRAFT, please advise Clive Alexander

Hello, Is there a way to toggle the DC-6 water injection pumps using a button on the throttle? I can't find this function in the DC-6 Linda module, i tried with War Emergency Power in P3D but it doesn't seem to work. Everything else works well, many thanks for the great Linda software and DC-6 module !

Hi , is it possible to start LINDA with a specific aircraft ? I do not want that LINDA starts always with P3D in general. I just need LINDA functions with my FSL A3xx, not with others. The other aircrafts are controlled by SPAD.neXt. Thanks

Hi, I've been trying to combine two functions to one switch on Saitek Switch Panel to be able to turn on and start the APU in my NGXu. This is probably my 500th attempt. What am I doing wrong? Using the latest LINDA, FSUIPC (reg) and latest 737NGXu profile. Any help would be much appreciated. function NGX_APU_on () ipc.control(PMDGBaseVar+118, PMDG_ClkL) ipc.sleep(50) NGX_APU_start() ipc.control(PMDGBaseVar+118, PMDG_ClkL) NGX_APU_show() Thanks, Glenn Asher

Hello All, Maybe beating a dead horse here but I have installed the latest LINDA application onto my machine and am trying to program the buttons on the HoneyComb Yoke to correctly control the exterior lights on the A/C (i.e strobes, landing lights, beacon,etc.). I can see the button activity occur in the LINDA log screen but the PMDG panel is not switching the lights on/off on the screen.. I have Win10, P3D 4.5, the latest LINDA and FSUIPC applications and have downloaded the 737-800NGX module for LINDA. Jim

Hi guys, I've just purchased a new Warthog HOTAS and am loving it. Over the past 2 days I've downloaded LINDA and learnt a lot about assigning events to button presses and am currently utilising the NGX modules provided. Great stuff. What I'd like to know is if its possible to assign two events to occur consecutively upon a single button press. I.e, I want yo assign one button press to firstly enact NGXCDU GND PWR ON and then NGX GRD PWR ON. I;ve tried creating mouse macros with FSUIPC but thats been problematic and I think part of the issue is FSUIPC not being able to pickup certain PMDG events or something. Anyway, is ther…

Hi, I'm missing the notification sounds when switching the Modes in LINDA on my fresh WIN10 System. Is there a solution? Soundfiles are there where they should be. EDIT: Disregard, Sounds are back

Hi all, Me again... Would anyone be so kind as to tell me why this doesn't work? I have taken the joystick and button number straight from the 'buttons + switches ' tab in FSUIPC. The code is straight out of the Lua Library doc. The sound file is in FSX/sound. The code is in the aircraft user file. function LibUserTimer1Hz() function set8000 () x = ipc.testbutton(0, 11) if x == TRUE then sound.play("MRSDAHL") else end event.timer(1000, "set8000") end end What dum mistake have I made this time? Thanks in advance!

Does anyone know if this is possible in Linda ? (everything else is working great) - want to setup a button to swap active / standby for com on radio1 and radio2 if possible. thanks - Julian