Voice Control Version

Hi Byork, I have seen that in Circuit Training mode the FO set flaps 15 immediately after touchdown, in accordance with standard procedures for touch and go. Could it be possible to include in the FO flow also the trim reset to take off value ?ThanksRegards

I have just thought of what would be nice to hear in the future and this is a female voice! It'd be great to have a female co-pilot and perhaps ground crew. I have found two threads that link to this idea already. Something worth thinking of in the future I believe ;)Regards

Hi,On my FS2Crew voice version installation, I've noticed the F/O is not turning off the Flight Directors as part of his shutdown flow. I'm not positive, but it seems like he is first turning off the Flight Directors during his after landing cleanup flow, then turning them back on during his shutdown flow. At any rate, the Flight Directors are in the incorrect "ON" position after the shutdown checklist is read. Thank you.-John Thomas

I think it's been noted already that the Autothrottle ON/OFF voice command is reversed. The command for the Flight Director ON/OFF also has this bug. Commanding them OFF has the FO turning them ON and vice versa. If it's already been noted then fine, but do you think this can be fixed for the upcoming SP1?On a 2nd point - my FO volume seems very inconsistent. His responses/confirmations to commands have a much lower volume than when he initiates checklists etc. The captains volume (during briefings etc) is also much louder than the FO. This is all with one constant setting of the volume knob on the main panel... Anyone else have this problem?Adam.

Hi,I'm new to using FS2Crew but I installed the Voice version without difficulty and managed to get the flows working (...but I'm still looking forward to the Tutorials).My main problem at the moment is uncertainty as to when I can issue ad hoc commands to the F/O.For instance, I've found the F/O ignores requests to perform most of the MCP and Overhead commands unless we are flying. After engine-start I tried issuing "set heading xxx", "flaps 5", "select wipers on", "Select Seatbelts Off", "Select Seatbelts On", "Select TaxiLight Off" etc etc but the F/O did not do any of these tasks despite the commands being understood (ie displayed correctly in the green status bar).I…

Hi AllOK, this is my first run with FScrew and I have managed to get as far as 'S.Crew/Engstart' in yellow. what do I have to do now.i've looked through the manual, but I can't find anything.Please adviseSorry if this is a real dumb question. I've been sat at EGGD for over an hour and my PAX are wondering why we haven't moved yet lolregardsPS hope someone does a tutorial, looks like I might need one !

HiHave been using FS2C offline for a week, tonight was my first flight on VATSIM with my brand new FO and it all started so well...After pushback the FO failed to hear my voice? Tried recycling the program without any luck. No green box was appearing in the top left, the FA made announcements I could instruct a briefing which seemed like all was working. Passed FL 100 and FO completed his flows but still couold not hear me?Is this an issue with FSINN? Or what should I try? BTW ATC could hear me fine and no mutes were being used...?

Hi,still learning but when would the PNF accept the "Flaps Up Speed" after takeoff when i have the NADP2 activated (1500 reduction and 1500 acceleration height) ?. I sometimes have to say it twice. First time he do repeat the command but not the action.ThanksMichael

Sorry if some of these have already been mentioned but a few things I've noticed on my last flights.1. The FO won't set the transponder to TA/RA during the runway entry procedure2. The FO didn't switch the flight directors OFF after I said it was OK to clean up before vacating the rwy and nor did he switch them OFF during his shutdown flow. Switching them OFF is indicated both during his after landing flow and shutdown flow...?3. The FO left both the wheel well light and the pos light ON even after securing the a/c, is that standard procedure IRL?

Hi BryanReally love Fs2crew for the NGX, I noticed that you can hear the cabin crew running through the safety brief for the pax I was wondering if more cabin crew ambience could be added, I do recall in an older version hearing all the chatter as the pax were being greeted as they walked past the cabin door and also when they unload. wonder if more cabin noise can be added in a Service Pack through out the flight such as cruise and descent etc etc. Other alternative would be for me to get something like fspassenger or something similar. To me its make a big difference with the cabin ambiance in the background, thanks again fs2crew makes a huge difference to the NGX and …

Well, after much trying and frustration I have given up on FS2C for now. I have followed all suggestions on uninstalling/reinstalling PMDG and FS2C and still cannot get it to work properly. Wont detect window heat, pmps, seatbelts, cdu preflight complete or beacon all being accurate. Any command for the MCP (speed, alt etc) causes the chosen item to run away and I have to stop it with Cancel Last Command. Cannot contact ground crew (yes, I'm setting it up right). Ground crew will respond to "Ground from Cockpit" but not "Cockpit to Ground". Even tho it will answer Ground from Cockpit it will not go any further. Any call for engine start results in a Not configured …

I have reinstalled fs2crew but the test is being cut off in the flow box. see attachment.

Hi,I'm having an issue with voice recognition controlling Windows 7 menus instead of correctly interpreting what I say as FSCrew commands. I am not starting Windows Voice Recognition before running FSX, nor do I have Windows Voice Recognition starting up automatically at Windows bootup. Rather, I am starting Windows Voice Recognition only AFTER running both FSX and starting FS2Crew as stated in the FS2Crew online user's manual. I also have a fresh installation of the PMDG NGX, along with SP1C correctly installed.Specifically, what is happening on my installation is that when FS2Crew seems to correctly understand my voice phrases, everything works fine. However, if…

I like the layout of the online manual with the hyperlinks and search functionality but would it be possible to make an offline version? It would be really nice since my internet is slow. (im not talking about just a pdf)

I would like to practice using the checklists and then finally a complete flow without actually flying just yet. Is it ok to do a prefight > end flight > then start anew and repeat that process to get the hang of it?

Is there any way to shorten the pre flight from 30 minutes?

Hello! I need to buy a new headset, for FSX. What is a good option, and compatible with TrackClip Pro? USB will be better? Not too expensive... Enviado desde mi Galaxy Nexus usando Tapatalk

When I lower the sound of the cockpit and engines in FSX it does not lower?

Hi AllWell, I've tried as per the EFB manual, but All I get is A 'SCRIPT ERROR' :Hypnotized:Hmm, I know its a bit 'yester year' but please could I have the PDF version or can the script error be fixed.I use EFB's library function for all my manuals, its saves trying to hunt them all down, when you need them.Regards

First after a reinstall everything works as it is suppose to (i guess :-) ) in the default livery but will try out in other versions as well.On my mind is this.Just one minut Prior to pushback and enginestart the Cabin would annonce it is ready but it seems like i am suppose to close the main door BEFORE i run the Before Start Checklist which i did 2 minutes earlier. Is it not the cabins responsability to close the main passenger door or is it not simulated ?The search option on this AVSIM forum on the top right corner : Why is it google that pups up and not search results for simular topics :-)Just prior to descent: Is it normal that the PNF would set Brakes at FL390 for…

Just had this error after one hour or so in flight between EGCC-EDDF CTD!!!!After new install and ONLY DEFAULT LIVERY. 737800 /Michael faulting modulepath:C\windows\system32\FS2AUDIO.DLL/Michael

Great program! Works well on my system. A minor request. Anybody out there have a text copy of a typical briefing? If not I'll transcribe and provide one.. just thought I'd ask... I'd like to be able to do my own....Ed F.

I do not have many problems but after i choose British airways livery i was not able to perform pushback,engine start (not conf for engine start) etc.Will try default livery this timePS!even choosing 2D would auto switch fast to 3D after loading. Maybe EZDOK is doing something ?/Regards Michael

Guys and GalsAnyone know when we should be getting the update?Thx Ian

hello i just want to turn down the volume in FS2CREW ?