The X-Plane General Discussions Forum
General discussions focusing on the X-Plane Simulator. Help and user to user guidance on this simulator is available here. If you are an X-Plane user, please contribute to this unofficial support forum for X-Plane.
9560 topics in this forum
-
Well, it is now open. I suggest you go take a look and insert whatever you feel like XP would need. Of course there is no certainty in anything (especially considering that Austin does what Austin likes), but it is still worth a try 🙂 https://feedback.x-plane.com/
-
- 93 replies
- 12.5k views
-
-
Is there an NDB in the Laminar Boeing 737 ? I cannot find it . Thanks
-
- 3 replies
- 1.9k views
-
-
Hi there, I am new here on AVSIM. Right now I am going crazy for something I cannot seem to solve in mij XPLANE 11.50 (running Vulkan). Have CPU 9900K and GPU 2800TI FF A320 cockpit view with ALL sliders set to minimum in the settings and only getting 50 FPS. My CPU frame time = 0,02 and my GPU frame time = 0,004. I guess the CPU is bottlenecking the FPS but how can it be? It's running on 5GHz no throttling, no C state, usage on average is about 25% ... What am I missing here? Tx, Olivier
-
- 37 replies
- 5.8k views
-
-
I have seen the GTN 750 installed in the panel of the default 172 but have not been able to install it in 11.50. Anybody who has done this please tell me how. Greg
-
- 2 replies
- 738 views
-
-
I loaded in X-Plane a Carenado C182T G1000 Skylane. I use Simionic PFC - MFD on iPAD's synced to X-Plane. All works great except the Low voltage CAS light remains illuminated on the PFD due to Bus E showing 23.9 volts on the Carenado C182 in X-Plane. It need to show 24 Volts on the Carenado C182 in X-Plane. Carenado say's I have to ask on the forum how to edit this value as they cannot edit an airplane.
-
- 0 replies
- 955 views
-
-
I may have reported this some time ago but can't find the thread. Anyhow when I enter the 737 cockpit in 3D, the camera is facing the rear of the cockpit and I cannot get it to swing round to the correct position. I've tried running XP11 from a clean boot (I first had this after playing around in FS20, rage quitting and going to XP) and still get the issue. I've tried verifying Steam files and that hasn't helped. Any suggestions, please?
-
- 1 reply
- 621 views
-
-
I just bought realityxp gtn750. what are the planes that it is compatible with? Thanks...Grrg
-
- 6 replies
- 2.2k views
-
-
On the google drive link says quote exceeded... Any other way to get the most up to date Zibo mod? Reason I ask is because I'm having issues with the AP disconnecting all the time and pressurization doesn't seem to work at all. I'm really rusty on 737 ops - used to own the PMDG for FSX... but forgot basically everything. So hoping for the most recent version before I go ask for real help LOL zibounited by ryan b, on Flickr
-
- 17 replies
- 12.9k views
-
-
Hey im thinking to buy one of the TrueEarth addons especially for bush flying in the US, or maybe in EU? the reason i want to switch region because Xenviro does not cover major and small non updated metar airport in my region, previously i want to fly in papua. I tried Ortho4xp but theres so much cloud in my region too.
-
- 2 replies
- 952 views
-
-
Hi all, I have two monitors, one a 42 inch which I run at 4K, and another 23 inch I run at 1080P. No matter what I do XP11 will not let me run these as I choose. My 42in is recognized as the default monitor but will never seem to go into a windowed mode, not at its native resolution anyway, and previously had to use a lower res just to get it to go into windowed mode, now windowed mode doesn't even show up as an option. My second monitor is sometimes recognized, sometimes not, sometimes I can move my pop-up screens, sometimes not, and then they go over to the second monitor then quickly spring back to the main monitor. I deleted (moved) my preference folder to…
-
- 1 reply
- 767 views
-
-
Does anyone know a source of free orthos for Germany? Sort of what Forkboy did for the US. I know I could create them myself, but I'm not in the mood for that.
-
- 12 replies
- 6.5k views
-
-
Hey guys, so i bought two airplanes from this company named Aerosphere. They are the Piper Warrior II Turbo and the Piper Warrior II 161. They were $24.95 ea. But here is my issue. When i purchased them through X-Planestore.org, they did not come with serial numbers that i need to activate them in X-plane once i installed them. X-Plane store told me i need to get them from Aerosphere directly. Well i have emailed them 5 different times in the past week and they never get back to me with the serial numbers i need to fly these planes. So i tried to get a refund from X-Plane store and they laughed at me telling me sorry no refunds on software period for any reason. So I'm st…
-
- 8 replies
- 1.8k views
-
-
Hi there seems to be pirated X-plane etc. airplanes on discord. Never used discord, how to search for such? Thanks
-
- 1 reply
- 723 views
-
-
Where can I find instructions on how to add or edit GA traffic in Traffic Global installed in X-Plane 11?
-
- 2 replies
- 1.5k views
-
-
Every time I use the popout for GTN650 it disappears I need help.
-
- 0 replies
- 502 views
-
-
Hi I am recreational pilot no longer flying solo and am eager to do some flight sim. I have played around with an older version of Xplane on my iMac. However, the more up to date versions require a better platform. I am a pensioner on a tight budget (getting tighter with the pandemic and financial situation). Is it feasible to get a decent platform for the latest Plane secondhand and if so what roughly am I up for - include a decent monitor. I am happy with minimum requirements specs rather than having plenty of reserve. Thanks guys
-
- 5 replies
- 1.3k views
-
-
Hi xplane11 steam users! I've been flying around in Xplane11 for years but I bought it via .org store. I've been trying to increase cockpit size in vr for a year or two now. I've set iPd to 58 in oculus software for my rift s. In p3d you can choose steamvr software to adjust iPd to a lower level to increase cockpit size. Is this possible in Xplane11 via steamvr or does xplane only use oculus software? Yes, I know the cockpit size in XP11 is accurate but I have a kind of deviation so that I can only fly comfortably when cockpit size is abnormally large. Thanks for any advice! Jozeff
-
- 2 replies
- 1.2k views
-
-
Whilst the flight model for the Cub seems generaly quite well done, I see that Im not alone in finding a lack of elevator authority in the roundout and flare, a three pointer is almost impossible without adding a an unrealistic chunk of power or coming in too fast Has anyone come up with a workaround for this, its a shame as it spoils what would otherwise be my goto Bush Plane
-
- 2 replies
- 1.1k views
-
-
Hello, I am new to using flight simulators. I am trying to run a Garmin 750 plug in from Reality XP and the Aspen EFD 1000 from Sim Innovations in Xplane 11. All works well, except I have no course guidance. When I start the Garmin 750 in the game, the test it has you do at first works only partially - DTK is not shown on the Aspen but the course momentarily shows half left. It shows no half up on the glideslope. If I select VLOC or GPS mode on the Garmin, the Aspen reacts accordingly at the bottom showing "NAV1" or "VLOC". However, no change in course or heading or course guidance no matter what type of approach I log or in what mode. Any ideas on how I could tackle this…
-
- 2 replies
- 1.2k views
-
-
sometimes, stuff I thought I had already understood, but was actually not quite understood... Anyways, a great series of videos from a dedicated student pilot and simmer, trying to use Plane Maker to build as close to the rw as possible a model of a SkyHawk. Really worth watching, if you can. The video linked bellow is a summary of the various sessions on his channel on desgning and testing a C172 that could match real numbers the closest: https://www.youtube.com/watch?v=dluyBJMNSpw
-
- 0 replies
- 718 views
-
-
I was wondering if anyone else was having trouble connecting X-Plane 11.50 with Air Navigation Pro on Ipad. Apparently Air Nav Pro now no longer needs a plugin (it worked fine with one), but I simply cannot understand the instructions on their website. This is what it says: X-Plane Plugin With ANP iOS 8.0.300 and onward. Pilots do not need to install any plugins to connect X-Plane. Standard position/attitude sharing settings for sharing via a network (UDP) must be turned on in X-Plane settings. To be able to use the AirNav simulator, a .airnavdebug file with AirNavSimu = true must be imported and ANP restarted. To reset to the actual X-Plane simulator,…
-
- 10 replies
- 3.3k views
-
-
X-KeyPad in VR Mode video.
-
- 0 replies
- 688 views
-
-
Hi all- I've seen a few add-ons (paid and free) to make adjustments to the visuals for the sunlight hitting the ground. What's currently the "best" or easiest/most straightfoward way to make the ground look like it's being hit by direct sunlight? Ideally... with more pronounced cloud shadows... thanks
-
- 6 replies
- 1.6k views
-
-
Hi guys, See my question..... Tried several Lua scripts I found online but my shadows keep appearing. Due to fps issues I'd like to disable cockpit shadows completely but I don't know how? Any tips? Thanks in advance! Jozeff
-
- 10 replies
- 8.4k views
-
-