The FS2004 (FS9) Forum

I need helpHow do I get the Fanda panel Dash 8 get to work in the dreamwings Dash 8. I have the panel showing in flight simulator 2004 but the gauges won't show up. If anyone can tell me how to work it That would be great.Thanks

I just uploaded my update to the Overland 777-300ER FDE. It should be available in the file library in the morning, along with my others for the Overland series:http://library.avsim.net/esearch.php?CatID...&Go=Change+ViewEnjoy!-- Bryan

Hello all,I have accidently deleted (don't ask me how) the Piper J3 Cub from FS9. I would like to get it back & from the info I have, it appears that the FS9 disk directory show that aircraft are on disk 1.What is the procedure & how is the Piper J3 Cub obtained from disk 1?Thanks,Bob A

So at La Calderera, last night - on my long journey to Fuertaventura in my wonderful Eaglesoft SR22, I encountered the strangest problem.After waiting a long time for the avionics to kick in (like they always do), I was ready to take-off and head south, only to get the following read out on the engine page...http://i73.photobucket.com/albums/i223/jon.../STUPIDSR22.jpgI don't know about you, but it looks to me like the engine is revving 10 times more than it should, the manifold pressure is next to nothing, and I'm apparently putting in 210% power, which is impossible. The CHT is also through the roof.You'd think that this anomaly would give me the most ridiculous power bo…

I have installed just flights traffic 2005 and the americna airlines woai package but at the default airports i dont have any AA traffic and 70% of the traffic is missing dispite the slider being on max. However i fly over to one of flytampa's addon airports and there is hundreds of planes and my AA woai package is showing up.Any ideas? sorry i havent been at fs2004 for a while so ive lost touch with stuffThanks for the helpRichy

Has anyone purchased this? http://secure.simmarket.com/product_info.p...roducts_id=2892Looks pretty good from the shots...was hoping someone could comment on it. Curious how well it integrates with GEPro and Flight Environment.THanks.F15Driver

Hi again!I get a very annoying, pulsating squarish marking on water in my FS9,which I never noticed before. (See screenshot)How can I get rid of it?Grateful for help.Thanks.Hans HermanssonSweden

Overland has just released in update to there vol 3 and vol 4 scenery's.http://www.overland.co.jp/english/index.htmlhttp://www.overland.co.jp/english/sms/download.htmThe newest updates are as follows.-Taxi way lights' brightness has been increased, in all 6 airports.-Airport ground vehicles and 3D general vehicles have been added to all 6 airports.-Narita Airport's newly refurbished terminal.-Support for Airport Enhancement Services (AES) software (Only on FS2004).

I am prolly one of the last people in the community to have bought the PSS 777 which I find to be better than I had been led to expect and very flyable. I recently visited the POSKY website for the first time in quite a while and found their 777 v2 with a VC which looks very nice. But I am wondering, how does the POSKY jet compare visually with the PSS T-7 visual model? Also, does it have more features or working surfaces that you can see in action? Appreciate any posts, thanks!JS

Hi, After downloading and installing the update for Japanese Airports Vol 3,not only does it not work but when opening flight simulator i get this message:- You do not have permission to install new files on this computer.Please have an administrator log on to complete the scenery installation I get this even though i am logged on as an administrator and have never had a problem with any other program. I click OK then get this message :- Unable to write cache file Addon ScenerySimmmerskyRJAAScenery.dat.You log on as auser with write permission. Then i get put back to the desktop. It is obviously related to the JA 3 update b…

Hello,I was just wondering, does anybody know any file for FS2004 that i could download off Avsim that will allow the Aircraft that i have downloaded off Avsim as well (e.g Project Opensky Aircraft) to appear at certain airports when i am flying an Aircraft?would appreciate any help given.cheers, Matt

Hello,I am driving myself insane trying to activate a SID for Honolulu HI in the default fs9 gps500. More specific it is the KEAHI THREE Departure Procedure in PHNL.I can't seem to load or even find this procedure in the default fs9 garming gps500. Has anyone had any success loading SID's in the GPS 500. I can load approach procedures without a problem but cannot load departure or arrival procedures.I did some searching and it seems like alot of people have the same problem. Also the fs9 learning center says it will cover it later in the section but I was never able to find a way to load departure procedures.I would like to use the default without having to load any a…

I have the Overland packages and love the 747-400 turning radius. Is there a way to help the A380 turning radius so it is tighter? I have been watching the EK A380 as it taxies in NY a few times and I know it is a much better turning radius than the overland model. Is there any way to change it?thank you!

I am downloading as I type.http://www.eaglesoftdg.com/been waiting for this.

Hey guys, I am currently in the process of doing my first ever repaint for a FS2004 aircraft (can't tell you what it is yet, except, of course, it's for an MD-11 ;-) ), and i hope to upload a Kneeboard HTML checklist with it, which i have already done, but i also hope to provide a Reference Information sheet too, the same as the default FS2004 standard.... But, i am having extreme difficulty finding all the VMO, VLE, flap placard, maximum air penetration, accurate V1 VR and V2 speeds etc, so does anyone know where i can find these? This also begs the question, where did Microsoft get this information?Be great if i could get some replies on this, Thanks a lot

I ran FS2004 on an older AMD 950 MHz, 256k ram, machine with accelerator video (WIN XP PRO) with just the basics, and got okay frame rates but could configure all the settings within FS2004.That machine died and I am running now on a new pre-owned Compaq 2.8 GHz Intel Celeron, good video, a gig on ram, and I installed FS2004 last night but noted that all the slider bars in the option settings, from display to sound, to realism, cannot be slid using my track ball. They are all non-functional even though I have the options set to "custom" settings. I tried to un-install and then defrag'd, and then re-installed again today, but get the same issue. Everything seems like …

Hi,Firstly,Q66004GB9800 GTX+auss p5k-evista 64FS9 with addonsFSX tooLatest drivers..FSX runs no problems at all.. but I FS9 won't even load up.. I click the icon, the splash screen shows, and then it's just flicks and then goes away.. and nothing.. it just closes... is this a driver issue?.. I saw a message once about some graphics issue and it wouldn't load FS9.. but I can't get this message to show again... Anyone any idea what is causing it?CheersCraig

Hi! I know it

Here's a link you can send if you want to give a totally unexperienced person a general (though limited) idea of what sim flying can be like. Just have them bring up the link and move cursor from side to side. Pity it doesn't include an elevator control too -- but the scenery's nice.http://www.electricoyster.com/electric3d/index.html

Hi AllFriend of mine cannot get his 'F2' key to operate his reverse thrust. I had a look under 'key assignments' & strangely it is not listed? So i could not re-asign that key. He has changed his keyboard (a bit drastic i know) but it still does'nt work. What if he deletes his FS9 c.f.g. file & re-starts? Any suggestions please?CheersRod

Hello GentlemenI downloaded and installed Learjet 25d by Lars Roennig witch is I must admit a beautiful aircraft. However since there is no manual I would like to ask some questions if I may.1)Is there a way to shutdown the engines form the panel or do I have to use the key command?2)How do I set speed hold on and off?Thanks in advance! More questions might come as continue flying this aircraft... ;-)Regards

Hi again!I just wanted to add another screenshot with my FS9 watersquarish marking.I never noticed it before, but it is very annoying.Does anyone know how I can get rid of it?Grateful for help.Hans HermanssonSweden

Could someone please tell me which disk this is on or send a copy to me at [email protected] as i cant find it for the life of me on any of them, I need to do an uninstall of FS9 and this file is missing on my system for some reason. Any help would be apprecaitedRagards from a rather stressed and bald from pulling my hair out Rich!

Hi,It seems like pretty much everytime I fly an ILS, I never get any distance readout which is obviously pretty important in IMC. I was wondering if there is some kind of patch of update available to fix this issue.Thanks,Jeff

I was absent from flightsimming for nearly 2 years and wonder if in the meantime a 737-300/400/500 with virtual cockpit became available, either freeware or payware (besides the default one and the one FeelThere Wilco).I did some web search and the only 737 Classic with VC I came across was from Overland/SimmersSky but this one is apparently not available any more (at least I cannot find a place to download/buy).CheersWolfgang