The FS2004 (FS9) Forum
20979 topics in this forum
-
Hello AllI am currently trying out two versions of the ERJ 145 one model by Dreamwings and the other by Posky.I have found a very good panel by (apologies for spelling )by Bill Grabowski, the 2d panel is excellent but the other cockpit views are rather poor and also include a rather scary looking co-pilot that stares unsettlingly back at you.I have managed to find some wingviews for the Dreamwings model,(thus eliminating the staring Cpilot)but as yet have had no success with the Posky variant.I was wondering if anybody knows of or can create some wingviews for me.?One other thing as well.With Posky ERJ there is no VC (i am not bothered about that)but there is a disembodi…
-
- 8 replies
- 4.4k views
-
-
Hope someone has this aircraft and can let me know if you have the same strange issue I have.The aircraft is the BAE Hawk T1 as created by DSB. The filename is BAe_Hawk_Mk_T1.zip and I downloaded it from this site:http://www.farmboyzimsflightsims.com/Milit...t_Fighters.htmlThe aircraft is a joy to fly but no matter which version I have been flying, when I hit "end flight", I am always dumped out of FS2004 back to my desktop.I don't think that has ever happened with any other aircraft. Before I attempt to reach the authors (package was released back in 2005) I thought I would see if anyone else has had the same experience and if so, if they found a fix or workaround.Than…
-
- 4 replies
- 1.7k views
-
-
I am freezing in the forward-up view while on AP after a short period of pilot inactivity. There is no way other than restarting FS9 to get out of this. Restarting the flight does not change this. I am running XP, 2 gig RAM, 512 video, using a CH Products yoke and Saitek rudder pedals. Any ideas would be appreciated.Thanks
-
- 1 reply
- 844 views
-
-
As soon as I release the breaks they start to taxi. Is there away to lower the idle thrust value, perhaps in the aircraft.cfg file. My Posky 737-700 idles at 31% for example. I'm sure that I managed to tweak something the past that sorted this out. Thanks in advance, Ren
-
- 7 replies
- 1.9k views
-
-
My C drive is where fs9 resides. I have installed addon scenery, payware or freeware, in C as well as D.I'm running out of space. (80GB for each drive)I noticed that as soon as C was over 85% full, fs9 began to be unstable. I had to uninstall some great scenery to bring fs9 back to life! (such as the Netherlands 2000 scenery-29GB!). So if I get a new external drive and use it for space hungry addons will fs9's performance be better/more stable?Eytan OrnsteinIntel 2core duo 4400 2.1 GHZDDR3 2.0GBGeforce 8600GT 256 MBWindows xp sp3
-
- 8 replies
- 1.3k views
-
-
Hi,My name is Richard Keene and I am a Pilot for AMERICAN AIRLINES based in Dallas (DFW) but I live in Nebraska so I have to Commute back and forth. Anyways on NOV. 12, 2001 I had lost my best friend and fellow pilot "Captain Edward States" on American Airlines Flight 587, I don't know if you are familiar with that accident or not, If not you can google it.I am opening up a Virtual Airline in his Memory And i could use some help. I am making it as true as possible from what i know from working with American Airlines for many years. but if you would like to help and want a "Virtual Airline Job" have some Advancements to higher positions, A fun, real, and Family Airline Exp…
-
I have a 747 model that comes in a little hot and need to know about reducing AI aircraft landing speed. I have an instruction about adjusting the speed at which plane rotates, which is lowering the "reference speeds". Will this also adjust the landing speed?Sometimes it overshoots the runway and has to go around because it's still too fast on final. Thanks for any help.
-
- 4 replies
- 1.6k views
-
-
i've searched the forums but can't find exactly what i'm looking for so thought i'd post it. most of my takeoffs are done manually but i tried using the TO/GA for takeoff in the default 747 { the switch is supposed to be on the throttle quadrant but i don't see it} so i use ctl=shift-G. i fly from the VC also. after i turn it on i get full power, pitch up and rotate then try to throttle back alittle but i still have full power. exactly how am i supposed to work this thing? are the auto throttles involved somehow? if so when and how to switch over and what about auto throttle settings as far as the TO/GA is concerned? any info at all on using the TO/GA would be a BIG help.…
-
- 10 replies
- 3k views
-
-
Suddenly my right side engines stop responding to my CH throttle quad on verY short final right after after I turn off auto pilot and autothrottle to make the final touchdown. Happens on all planes and all flights, doesn't matter if it's 2 engine or 4, turboprop or heavy and only the throttles controlling the right side. I can control them using the mouse, but not the quad. Takeoff and Taxi are fine.Am I doing something wrong procedurally or should I continue to root around in my FSUIPC, and software settings. I have even gone as far as setting my default flight to the default cessna at KSEA, but no joy.I've never had this problem before and not sure what's causing it…
-
- 16 replies
- 1.8k views
-
-
Everytime I accidently hit the E key in a jet, I only get engine 1 operating. I have tried everything to get the other engines working again but can't. I have to reload the craft to get all engines working again. Any thoughts? Maybe I have to turn off the E key in the assignments to stop this. This happen in both RFP 747 & default 737.JimCYWG
-
- 8 replies
- 2.2k views
-
-
Hi everyone. I have been out of the Flightsim loop for about 12 months, with an unrepairable 8 year old computer behind me. Thinking that waiting for developments on the CPU front would be a good thing, I have been watching and hoping myself to death over the last year and still remain unconvinced that Intels Core i7 would eat FSX for lunch. I have deceided that I am going to stick with FS9 with XP as an O/S. After a fair amount of research this is what I have come up with. ANTEC Nine Hundred Gamers Case - Black Intel Core 2 Duo E8600 (2 x 3.3 GHZ) 1333FSB - 6 MB Overclocked to 4Ghz. ASUS P5Q PREMIUM 1600FSB (Intel P45) Corsair XMS2 4GB PC2-8500 1066 MHZ (2 x 2 GB) - Life…
-
- 6 replies
- 1.2k views
-
-
Hi,I am not able to get into the follow mode. I am able to get into the walk mode but not in follow mode. In the ReadMe it is written I have to press Numpad* to get into the follow mode but I can not find such a key on my numbad. What key is exactly meaned?Thanks for help!
-
- 1 reply
- 791 views
-
-
Hi all,I am having an impossible time trying to control the aircraft via rudder while taxing. Up until now I have never played the game with any wind but feel it is time to take the game to the next level. Obviously with any wind the aircraft is being pushed around. I am using the Microsoft Sidewinder joystick. I have tried adjusting the sensitivity with no results. Does one require rudder pedals in order to control the aircraft?Thanks for any advise.
-
- 4 replies
- 1.5k views
-
-
Is there a way to NOT have FS2004 pause when minimizing the window or opening a new window. I would like to be able to fly while conducting other work on the computer but when I minimize or go to another window, it automatically pauses the game.
-
- 3 replies
- 5.4k views
-
-
I've now posted this over at the Panel Design forum and the PFE support forum but no one seems to know if this can be done, so I thought I'd take one last shot here in the greatest repository of simming knowledge in the world -- the AVSIM FS9 Support Forum! :( Does any one know if and how this can be done? >> I make my own custom minipanels using FSPanel Studio, but that's about the extent of my panel making capabilities. Can someone tell me how to code the panel.cfg so that an auto-hide gauge is visible even when I switch to the minipanel window view? I'm trying to adapt the Taxi Guidance System gauge in Pro Flight Emulator to stay on top whether I'm in the main pa…
-
hey there...i'm currently using AFCAD 2.2 to modify my parking spaces...and the problem i'm facing is that i cant see the building structure.....i modify my parking spaces only to find out that some planes are actually parked in the building!...lol...and some taxiways go through the building....helpppp
-
- 4 replies
- 1.9k views
-
-
Dear all,I have download some afcads which have multiple runways being activated for takeoff and landing,but I don't know how this can be done.Can someone share with me the techniques?Many thanks!!!!
-
- 13 replies
- 10k views
-
-
Is there a utility or panel add on that will allow me to do this? Or maybe some way to configure the payware version of FSUIPC to do it?One of the main reasons I still use FSPassengers on almost every flight is because it allows me to do these simple tasks universally (on every A/C I have loaded up to date) using the keyboard, and therefore I don't have to madly left click or scroll with the mouse wheel on takeoff, short final, etc. just to tune radios or set my course.Thanks in advance for any help you can provide.
-
- 13 replies
- 2.4k views
-
-
I've made up a snazzy glove with a push button on the tip and an IR LED attached. By using the IR camera in the Wii remote, and freely available software on the web, any clickable cockpit can be used with the finger, instead of moving the mouse.http://www.youtube.com/watch?v=aLkfx6QxLfgThe video shows me using it in Black Shark by DCS, but over the weekend I fired up FS9 and was also able to click away in my cockpit, without using the mouse. For me, this really ups the immersion factor, and when used with TrackIR, gave me the ultimate flying experience.
-
- 10 replies
- 2.5k views
-
-
So far I am impressed with this program. One question I do have relates to the X-Gauge feature. I am trying to figure out how to add an activation icon to a panel to open the x-gauge without having to go through the panel view menu option. Any ideas or suggestions?Dave
-
As you see from the shot here, i am no longer getting crisp lighting effects, im now seeing poor shading and texture blending in FS9.1, I have never had this problem before and i havent altered anything as far as i am aware that would effect this, so whats happened?
-
Although it's recommended to turn of FSUIPC weather settings with AS6.5, I seem to recall a post a while back that mentioned selecting one or two FSUIPC weather settings--believe it was winds aloft, in order to attempt to smooth out those wild shifts you see over the N. Atlantic and several other spots.I have registered FSUIPC.Any thoughts?ThanksR. Michael Perry
-
- 1 reply
- 941 views
-
-
Can you recommend a good high quality freeware military helicopter? Either combat, transport, or search and rescue. I have been getting better at flying helicopters, but not really that good yet to buy a payware helicopter.
-
- 3 replies
- 1.2k views
-
-
I've always liked the exterior looks of the lear 45 but everything else seems off when it comes to flying it. I don't care for the panel, sounds, flight dynamics, or sight lines/views. I can't seem to find any fixes that are satisfactory. I was working on a new lear panel for awhile until my old computer died taking Panel Studio with it. If anyone knows where I can find some upgrades for this plane it would be appreciated. Any thoughts? I'm tempted to get the new Panel Studio and start again. Would still need better flight dynamics though.Nate
-
- 3 replies
- 1.8k views
-
-
Right,So I decided to install FS2004 again and when I went to change the display settings it won't really let me.Any ideas???