The FS2004 (FS9) Forum

I can't find this scenery anywhere for EBLG, can someone give me a link to the v2 of EBLG?Thanks!

Hellohttp://forum.qualitysim.com/viewtopic.php?...mp;p=3139#p3139Regards.Gus.

Hi,Please, tell me what is for the red button and front lever on side stick that is on A/C Airbus series. Watched on youtube the pilot use the red button a lot during approach phase.Thank you.

anybody,I just can't get acces to the website of Just Flight...Anyone else having problems or doas someone know what is going on?ThanksLuc Brusselmans

Just a quick question regarding rep, can it be used with gepro and activeskyThanks Gerry

I am trying to create an AFCAD for Firebag Aerodrome, Fort MacKay in Alberta (Airport code = CFG6). However it is hard to find any information about it. Would be great if someone could send me a chart of it from "Canada Flight Supplement" or something similar. It is used by Suncor Energy Inc. I have got the basic information like coordinates, length and width. However I need information about the layout of taxiways and parking area. Also information about light system and radio frecuencies would be great. Google Earth is not of much help as this part is nothing but clouds and low resolution.I you can help - please contact me either here or send me an email :cedarbush@_rem…

I know there is some tools to clean gauge, aircraft etc...But is there any tool to clean textures that i don't use. After install of GE pro, UT EU/USA/Canada/Alaska, there must be some textures that i don't need. And they use some space, that i maybe need.Any ideas?

Grump, grump... grump.It was a late night appointment with a bottle of wine.This morning I flew from Welshpool to Sleap, manually tuning radio frequencies from Welshpool through Manchester Centre and [Oh God, I've forgotten already, was it Lydham?] Centre for traffic advisories 'cos my reaction times are a bit poor but when I started to descend to Sleap and cancelled the flight following service, I couldn't raise Sleap to ask for permission to land.I could set the correct frequency on the stack using the knobs but on pressing the ' accent key to make a call, all I got was the standard options of either 1. Retune to [Oh God I still can't remember] Centre …

Hi all, I

Just in case anyone is interested and you're not a member of the list server, there is a new version of OMAA in the library. I'm mentioning this here only because KLM_PILOT wanted a nicer version then the one that was available and I told him I'd keep an eye out for one.So KLM_PILOT...there's a new version of OMAA here :)Mark

I installed this wonderful plane. There's a realistic panel but I got some problems. The master caution light in "fuel". But I don't know why if i put 100% fuel the light keeps on, the same for anyone % of fuel.Also, there's a orange flag above the altimeter, that i removed once but I don't know what I did :(.When I turn "on" the yaw damper and pilot statics the lights should be off, but they keep on.I read that tinmouse wants too provide realism with the flaps and speed brakes that can only be used by clicking. But it's not good when I touchdown i need to pause to open spoilers

Hi,I usually fly Vatsim in North America. But lately I paid attention that in Europe much more ATC coverage than here, home :( So, I decided to give a try and fly couple times in there. To plan my routes in North America I use FlightAware to find real routes, but it does not work for Europe flights. So, finally my question: what program or internet site should I use to find most updated routes in Europe. P.S. Sometimes I use SimRoutes.com or RouteFinder, which one from those given more realistic and right routes?Thank you.Stan

I tried this product after looking at many water add-ons over the years. Guys this is the one to get... I thought I'd throw a bug in everyone's ear looking to get FS9's water to look comparable to FSX's effects. You put this add-on together with Feng's setup and it's really hard to tell the two sims apart. I'm very impressed... For my setup I found the 'Realistic' option better than the 'Photo' option. Great job to the team in keeping FS9 up to date... :(

What aircraft have you most been flying lately? For me it's been the Leonardo Maddog 2008 project. After spending considerable time with it I'm beginning to feel it's at the top of the list of the all time best aircraft ever made for Flight Simulator (throughout it's 20+ year history). I was doing allot of GA flying prior diving into the Maddog project using aircraft like Just Flight's Duchess and Caranado's Cessna 206/182Q in areas like the Alaskan Forges region or norther Washington/Oregon. Everyone into airliner flying needs to check out the Leonardo Maddog, it's kept my attention none stop for the last couple of weeks when I've had the time. :(P.S. A friend of …

This is on all models on the left aileron....Is there a fix for this?? Thanks in advance.......

I soon will be getting a new computer and when I do my FS9 will be on it's own external drive. I bought a new external drive a few weeks ago and moved my whole FS9 folder to the new drive. Currenlt my FS9.cfg file is C:Documents and Settings/(my user name)/Application Data/Microsoft/FS9, now when I get the new computer should I leave keep the FS9.cfg file on the extrenal drive? Or should I put it in the same place it is now?The new computer will have a new hard drive and windows 7 and as of now I still use FS9 from the internal drive of the soon to be old computer.

Hi We just opened a new mutiplayer flight club.http://mutiplayerflights.wordpress.com/For fs2004 and fsx Hope to see you around Hunter

As I fly with a 3 monitor set up in the VC mode 98% of the time the wings of most GA aircraft are visable. Sometime I switch the MIDDLE monitor to the SPOT view but the left and right monitors are still showing the VC view and the wings show. THERE HAS TO BE A .CFG ENTRY SOMEWHERE THAT MAKES THESE WING VIEWS SHOW UP !!!!! Where is this setting ??? When I fly in the SPOT view I do not want the wings showing . I could try to "paint" the wings OUT and make a new view but this isn't the best way to do this. There must be a .cfg entry I could delete and get rid of the wings in my desired view. Where is it found. Thanks jerrycwo4 A screen shot below shows what the u…

If anyone is interested: http://secure.simmarket.com/drzewiecki-des...-1-fs2004.phtmlDemo versions: http://www.drzewiecki-design.net/prodPAv1.htmI don't own these (I'm waiting for my bank to replace my damaged credit card) and am in no way whatsoever associated with the development team. I'm just posting this in case it's of interest to anyone here.

HiyaI've modded my FS9 with New Zealand Mesh, New Zealand Scenery and Downloaded flyable and AI aircraft for New Zealand conditions including correct aircraft types, airlines, timetables and liveries.Added Real Environment Pro added custom 2D and 3D panels. Added custom sounds airport, engines, etc added S-Combo for Co-Pilot calls, GPWS calls. And cabin crew.Tweaked my FS9 using various tweak guides and lastly added LiveATC Chatter, can't get New Zealand ATC as our regulations prohibit internet broadcasts but the Australian ATC is pretty close to ours so is a suitable fit.All in all I've got FS9 modded up just great, and makes for a real flying experience. :( :( :(

In FSX the tower view is from the nearest tower, but in FS2004 it is allways the tower there you begin your flight from. Is it possible to change the way FS2004 does it, or are there any programs who can change it, so it is like in FSX?RegardsHenrik Viking

I have installed on Mike Stone C-17 panel but there is a blank there. Any way to fix this?This is a site i think mite help but i have no folder in modules "F16.gau" it's only in gauges folder.http://www.fsfield.com/browsezip.php?fileid=1103Please do help ya

I just brought Flight simulator 2004 I placed the #1 CD of Flight simulator in first and I clicked on run but a message appears "cannot locate the CD -rom" place in disk 4 so I place in disk 4 and still it does not install.Can anyone help me thank you.

Does anyone know where I can get the FSGenesis full west coast 38.2m terrain mesh that is/was on avsim? I downloaded both files but when I went to install them it said they were corupt.I am looking for both west coast (fsg_westcoast38m.zip) and rockies (fsg_rockies38m.zip) files.

I recently began flying with a virtual airline after a 6 year absence. I have FS9 with FSNavigator (registered) and was wondering if it is possible to update the nav info. I run into missing waypoints in FSnav a lot lately using routes generated on Simroutes.com. Can you still update FSnav with current or missing waypoints> Thanks