FS2CREW: DEFAULT AND PMDG 737 (FS9)

I have both the PMDG 737 and 747 FS2Crew and enjoy both of them very much. Everything works as advertised. Now for my question:I flew the 747 for a while and had everything working fine with the key assignments. Then I bought the 737 and now I have everything working fine for the key assigments. If I go back to the 747, do some of the changes I made related to the 737 affect the key assignments of the 747? I used the key assigments that were in each manual and I have nothing else that uses key assignments. I just need to know that if everytime I change airplanes, do I have to reset the key assignemnts?I like both products and keep up the good work.

After several hours of downloading, installing and reading manuals, FAQ's, etc. I want to start a flight with FS2crew, but I don't see the CPAL icons on the MIP. What have I done wrong?I have the PMDG 737-600/700 version 1.3 in a cold and dark configuration, as always.

I have FS2Crew 737 Professional Edition. It' s a great program. I have a strange issue. Pusback starts during "receiving aircraft flow" (without gate agent dialogue) and never stops..? The only way to stop it is SH

Hi there.I have used the default FS Crew 737 for a while now, and recently upgraded my PCI have tried to reinstall the programme but although the FS2 Crew info now shows in the programs bar on the left side of my desktop, I am having some problems.The CPAL bar only sems to work sometimes, and there are parts of the checklists which no longer respond etc.I am sure I have stuffed the thing up, but i need some advice!I still have my proof of purchase and product key stuff.Also the new PC is running with VISTA - can this cause any problems?My FS9 seems to be running well otherwise.Thanks for any help.Best wishes,

Hello, I just recently bought Fs2crew Pro for PMDG 6-7-800-900. I tried it 4 times but always had problems with the flaps. Before taxiing I tried to ask the FO adjusting the flaps to 5 but when I push the 'F' button nothing happens altough I previously carefully selected flaps 5, ICAO B and V (for VNAV) in the Departure Briefing, as written in the first tutorial...Why ? I'm a bit lost....Thanks to anyone who can help me !C

I currently own FS2Crew for the dafault 737, but recently purchased the PMDG 737-800/900, and want to get FS2Crew for it as well.What all does the FO do in the PMDG version?...what I mean is, I know in the default edition he'll cut on the pitot heat, set the auto brakes, cut on the beacon, etc. I was just wondering how much of the checklist, and toggle switching I still had to do manually, and how much the FO will do.I don't want to switch something on, then have the FO come back and switch it again.Thanks!- Jason

Hi, I bougth recently a new PMDG. I studied the manuals carefully and I succeded in completing all the procedurs requested. I have also filled the FMC with all informations required in order to start a flight. When I was finally ready and I closed the FMC with all the datas, a surprise has arrived. The frame rate the I first blocked at 20, surprisingly sinked to 4, making the bird praticly unusable. This happened with no traffic and with default sceneries. In the past I upgradet the ram to 1 GB and I also changed the grafic card with a new Radeon 9500 with 250 mb. It is very strange that my PC doens't support the PMDG. Should I pay for a new PC only to the pourpose to …

Hello Bryan,the title says my problem. I tried what i could (deinstalled, new installed) - nothing. Sometimes a strange Trojaner Message appears (pls see my pm for you).Any idea??

I can't get the PCAL panel to show up in VC mode. What did I forget?

I'm a new user of FS2 crew 737 default addition ( the download version )I think the program is great I'm slowly getting to understand it.I have bog standard FS9 so I am using FS9 ATC and FS9 Flight Planner. My question is does an FS9 Flight Plan intergrate automatically with FS2 Crew. I have printed out and read the documents that come with the download addition but cannot find any reference about flight plans.Be gratfull for your help when you have time to reply,Thanks Michael Coates

HiFirst off love the program, it adds so much to the already excellent PMDG 737. I am having a CTD problem on take off. It seems to happen as soon as i ask the FO to turn on the AP after lifting off.I am using Airliner Pilot with this, so dont know if it theres any known issues on the compatibility.Please help as i cant wait to use this program fully!I did manage to do the first tutorial flight with no probs.Thanks + Best WishesMattBTW using intel dual core 3.2 cpus, Geforce 512 MB 7600 GS + Win Xp media center edition.

Hi allTotally new to this and was just wondering if it possible to exclusively use the VC while using FS2Crew ?I only fly using the PMDG 737 VC.CheersNiall

I try to download the service pack 1 for fs2crew 737 default edition but it does not work, it is not possible download itcould someone tell me why????thanks

Having a problem starting FS2crew. I have followed the Tutorial and when I get to number 4. I become stuck.4. It

Greetings -I have been running FS2Crew on my machine for quite some time now on the PMDG 737-700. I had owned the 800/900 upgrade for some time but never got around to installing it.So, recently I installed the 800/900 upgrade, installed the latest SR for the 737NG off of PMDG's site, and installed SR1, 2 and 3 for FS2Crew.Now, no matter what plane I end up using, the CPAL buttons do not work. I do load with the default Cessna like I always do, but even following correct procedure, I cannot get the product to function.Any ideas to help would be appreciated.Jerry

Hi allI am a new userI am trying to learn the programAll seems to go well until I get to the engine start sequence in the 737-800 programWhen I hit the command to start engine number one the FO does not start the enjine and there are no FO calll out'sAny ideas or help?Cheers and Good Holidays!!DornPS I tried to find an ansewer to this problem in the FAQ section of the 737 forum but could not seem to find a solution

my overhead panel does not work with trackir, actually, it's not working at all. looks different too, on the 2d panel, the battery switch is on, but in vc, the guard and switch is open. when i'm in vc and selecting switches the overhead panel does not work, but the autopilot panel does. anybody have a good answer for this? thanks,rich

I've just installed FS2Crew again for the PMDG 738. I've tried 2 flights from KLAX to KEWR and it CTD both times, at the same place in the flight - about 150 miles out from TOD with the IN RANGE window open.Are there still problems with FSINN, PMDG and FS2Crew?

Hello:When I press A/P in the B.TO/TO/A.TO screen it will not engage AP, I have to press CMD A myself.Suggestions?Also, I noticed that there are numerous messages in the 737 forum however, I only see 4. Are the rest archived?TIATerry

Ho everyone,is there a way of changing the way the barometric altimeter setting is displayed?At present the altimeter may have to be set at 29.83 inHg, which is fine for flying in the USA. But as I fly in Aussie, the ATIS is given as 1010 hPa. If it is possible, does the FS2CREW read the new format?ThanksWayne

HI: i HAVE FS2CREW FOR Deafult 737. Everything seems to be working fine except for this: it has become a problem, beacuase I can

Hi,When I start fs2crew I get the first window. I push on start then the second window appear and disappear immidiately. FS2crew is wel running. The second officer start with the control of the aircraft. The flight attende come to get information on the flight but the window doesn't appear.and so one no windows but fs2crew is working. I have to pusch on C buton and then on 'next' to get the window on screen. Can you tell me what is the problem and how I can solve it?ThxLaurent

Hello,I use AZERTY keyboard as long as I'm french and in France.I just wonder, how to make the short-cut you ask me to put into the PMDG configuration panel ? Ctrl+Shift+6 is showed as Ctrl+Shift+ "-" not "6" as long as the AZERTY keyboard don't work same way...Do I have to set Windows to english language to set this shortcut ? Thank you.

Hi, when I

I am a newbie to add on aircraft, so please bear with my ignorance. I have all off Eaglesoft's civil jets and have had no issues installing or running them. I have purchased the 737NG 600/700 and the 800/900 upgrade. I would like a bit more detailed explanation from one of you on the install process. The .exe just picks the C: directory and I went ahead and directed it to my FS9 AIrcraft folder. I this correct? I was able to fly the plane but had to select the Cessna first in the flight planner and once at gate I used the top menu to change the aircraft to the 737NG. Everything appeared to work fine in brief first flight. I then went to try and install the 800/900…