FS2CREW: DEFAULT AND PMDG 737 (FS9)

Hi,installed de FS2Crew 737 for PMDG, since the install I

Hi Bryan,so I purchased your interesting product yesterday and tried to get it working today. So far I haven't been able to complete a single flight, unfortunately. What I commonly observe are huge memory leaks sucking all available mem/space until FS9 crashs. I've never had that before with my FS installation. I'm flying the PMDG 737-800/900 since about 6 months with no problems really.After reading the post with people reporting about observing memory leaks and serious stutters with f2crew (topic #233 here) I became anxious and tried my best to run it in an environment I'm willed to accept (this means AI traffic set to 0% and AS v6.5 turned off). I have stuied the manua…

I have fs2002 and wondered if the default version of fs2crew would work ok?

Hi just bought the PMDG 737 Pack. So far so good its really fantastic but I have a couple of questions.1) What does the sequence number do during taxi?2) When the flight attendant asks for me to contact maintenance or the caterers, do i have to do anything or is it automatic?3) Are there any flight attendant announcements or am i ok to use FSPassengers Flight Attendant announcements, i don't want any conflicts.Thanks

I installed the fs2crew for the 737 pmdg found 2 problems first before i tell of the problems i did set everything up the correct way i did go into the pmdg settings and unchecked what i needed to unchecked. Now for the problems one at the beginning when the flight attendant comes in all you here is a knock on the door she does not say anything. now i had this product before and i know when she knocks on the door she says something like captain are you ready for my briefing or some thing like that well she says nothing just a knock on the door and of course when i go to answer it sounds strange because he is answering a question that was never asked. now the second one wa…

HiFirst let me say that I dont fly without FS2Crew anymore! I have the ATR version and absolutely love it.This brings me to my question:Is there a FlowChart for the PMDG 737NG (specifically the 800/900) like the one for the ATR? I find it indespensible.:D TIA,Mike

when i start my pmdg 737 "ALL". of the fs2crew windows are open,is there some global way to close them all so that I can start at the beginning of the fs2crew sequence?It not really a problem , its just a bother.PeterPeter K P.EngCF-MMZToronto Ontario CanadaPMDG 747,737and 747FLevel D 767PSS Airbus pro A340-300In reality, a Mooney 201 Pilot

I just bought the 737 for PMDG 600/700. When I ran the tutorial, the electrical system shut down about 5 minutes into it. Everything worked, but no avionics or FMC. The APU shows as running, but I ran the fire test and it said the APU was not running. I switched to 2D to see if that made a difference. It didn't. I ran it again and same thing happened. About 5 minutes after FS2Crew went active, the avionics and FMC went blank. I continued to follow the tutorial just to see what would happen. All went well to the point of engine start. They started all right, and the avionics and FMC came back on. Then, a couple of minutes later, the FMC and avionics went blank again. I rea…

Hi guys, i am currently in the middle of creating a british sound set for the 737NG, and would like some help. I dont want to be the brit captain with a crew full of Yanks, so come all ye with great merryment all those who want to be included. Contact me on here, and we`ll sort something out.Bryan would you take a look at the final copy, whenever that will be and upload for others ?Regards David

Hi, i am trying to set uo my sound so that fraps records my flight without distorted sound. I have adjusted my sound settings within fs9 and i am happy with the results; however, is there a way to reduce the volume of fs2crew, as the voices are just to loud and they distort to an unaceptable level during recording. Hope that makes some kind of sense Cheers,David

Hi everyone,I was looking through old plane pictures when i saw a Boeing 737NG PFD and route map looking like this http://forums.avsim.net/user_files/174008.jpgI was wondering how could I get my PFD and Display map to look this on the PMDG 737NG?Thanks

Hi all, i have posted this in the pmdg forum also, After flying the 737 since its release, nad having used the fs crew for almost a year now, i have never used the ICAO A phase. Can anyone tell me what ICAO A is please and its advantages over B in either vnav or FLCH.one more thing; does anyone have the FO take off? Not even sure if that is possibleCheers GuysDavid

Hello,I reinstalled fs2004 recently and with that my addons, I own the PDMG 600-900 and the Flight1 ATR 72-500. For both planes I have the fs2crew addon, but Iam having some problems.in the PMDG I have the issue that my engines wont start, I have to manually set the start levers, because the FO won't switch them.After that, everything works ok until the (mcp screw) TO/GA button is pressed, the FO will call "100 knots", "positive rate" and the gear goes up.(i dont hear "power set")I have the idea that my assignments are screwed up, because when iam asking for autopilot A my APP light goes on.I dont know if the ATR has issues, I do not have many flight hours with it.Is ther…

I just recently installed FS2Crew Professional Edition on CD with the the PMDG 737TNG (without the 800-900 Upgrade). I loaded the program for the 600/700 model without the 800/900 upgrade.Everything seemed to be working OK until I attempted a night flight. After pushback, engine start, after start checklist and taxi checklist; I turned on the taxi lights and headed for the active. Prior to reaching the active the taxi lights just quit. The landing lights did not work either. When I loaded the same flight(using the default FS9 flight planner) but did not activate FS2Crew, the lights worked fine. Is this a known issue or is there something that needs to be tweaked in …

Hi Everyone,Seeing as there has been a release for the 747 and the C172,what is happening for the 737 both default and PMDG?Please don't give me the normal peil of "it will be ready when it's ready", as this to me is not an answer and the fact that not one word has been typed in respect to thiese a/cWayne

I just got my fs2crew, and I did the proper loading procedure with the cessena, now when i load my 737-800 and try to switch on the battery power the switch doesn't move, it won't click, nothing, i also noticed i can't click the nav lights, strobe, apu, gen, and others. What has happened, what did i do wrong, plz help.cheers, Scott

Hi,I have a NVIDIA GeForce4 Ti 4600 and I get 17 to 22 (locked) FPS when I using PMDG 738/739.With FS2Crew the FPS drop down to 5,6 to 10 FPS max.Any ideas?My systemP4 2,81Gb ramres 1280 x 960 16 bitExcellent Work!!Thx ;-))

hi thanks again for the quick responseshere is one final question i have noticed during flight or even on ground that when the fa contacts me for varios reason i cannot hear what she wants the green and red button just apears when i click on either of them i do hear her responce but not what she is asking me ?oh the only time i hear her is when she ask me to brief her and if it's ok to close the door but after that any passinger request or asking me if i want a coffie i don't hear anything until i replie to the question i have not heard?do you get what i'am saying oh and one last thing i also have the pmdg 747-400 will the version of fs2crew have fa safty check and askin…

hi thanks for the last post but now have another questionregarding the FA currently i have to us fspassengerto hear ther fa giving the safety check giving meals and sometimes poping in asking me if i would like a cup of coffie why does fs2crew not have it in them it seems with all these addons it always adds some of the things but not all of the things fspassinger is really good and it whould have been good to have a all in one package also have fdc cockpit which also gives you half of this and not the rest of that if you understand what i'am getting at oh and one last thing here in europa we use QNH so were can i enter that

hi i currently use fs2crew pmdg 600/700 editionand have a problem there seems only to be a few hand picked airports to put in the start procedures in fs2 crew and isp or aip i think for airports like kjfk .but what it i'am not flying to or from Thease airport what do i put in those colums to set it up so the fo know what sid i'am flying?

Hi fs2crew requires me to input info on the runways TDZE, which i think, on a british nats chart is the displaced elevation threashold. If msfs airports are not sloped, would the info on the the nats charts be useless?. should i use the the airport elevation data instead cheers for any advice Rich

Attention French Users:French language PMDG 737 Manuals by Marc Berthomeaux available on the FS2Crew 737 Downloads page. Merci, Marc!-Bryan

Hiwhen i takeoff i complete my BTO checklist then turn on the landing lights after i have my clnce and line up but my FO dosent do anything, i Take off and its normal and fine then when i click flaps nothing happens but Vnav Lnav ap ect work fine and the After takeoff Checklist dosent work any help pls

hi there, i am slightly confused about the pmdg 737 for fs2crew, if i download it from your web site is it just the 737-600/700 or is the 800/900 included??cheers Alex

Hi,I am contemplating jumping on board but would appreciate some responses on a couple of issues:1. How "buggy" is FSCrew? Are most of you having smooth sailing, or is it pretty finicky in terms of crashes, idiosyncrasies, etc?2. Impact on performance and frames in a non-hyperthread enabled system?NoelI understand it is "finicky" in needing to follow flows n procedures correctly, but otherwise how is it in this regard . . .