The Level D 767 | Wilco PIC 767 Forum

Hello,It seems that the long awaited release is very near; I guess this is a good time to ask if anyone has an actual real world checklist, any airline, for the 767. (If so could you post it to the forum so we can all use it?)I

To all PIC v2 team members, just want to know if we will be able to import FSp flight plans into the FMC directly or will there be some sort of feature to convert them in to FS9 format? for some of us it is a pain in the butt to have to type in pages and pages of jetways, waypoints, etc....

If anyone could please give me some help on these questions, I would appreciate it.[br,br,br] Question # 1.[br,br,br]I read somewhere that, for runway alignment, in a commercial jet that pilots will use rudder only?If this is accurate, my question is this:[br]At what height would ailerons cease to be used?[br][br]Is this based solely on wing proximity to the ground or are there standard procedures which cover this?Question 2.[br][br]Is there a minimum distance out from the runway that the 767 would be permitted to make 90 degree turn in order to be lined up with it? Thank youNorm

Hi, will there be anyway I can bring my flight planes from PIC into the new LDS sim? I read the files will be XML, is there anyway to convert the old PIC files into XML so we can keep the flight plans or will everything be lost? :-hmmm Thank you

worse than there only bein gone 767. there is only one painter at LDS lol(missi does a couple of his own to help out, but im it for painting so I have to pick and choose)Gary HayesLevel-D Simulations Development TeamNo im not a "real" pilot, but I did stay at a Holiday Inn Express last night.P4 3.0ghz w/HT & FSB..GeForce FX 5900 ultra 256MB..1 gig PC3200 DDR RAM..Sound Blaster Audigy w/5.1 THX

Hi!Sorry if there has been a thread of this topic but....Could you release the paint kit for LDS767? B757_767:-)

Hy to all,I have opportunity to upgrade my PC configuration hardware; so i ask to beta tester/developer if is possible known your configuration hardware for make a right choice.My intention is running 767 v2 using FS to med-high setting mainly in 2D visual.RegardsValerio

Well i got everything ready to go. i updated my charts and i have my schedule ready and i looked up everything i need to start testing this bird, but do you guys know where does Boeing handles it's 767 is it at PAE, or BFI or somewhere else. Just Waiting For The Release.Best Regards Adib Afraj:-roll :-violin :-abduct :-spacecraft

At 37000 feet above the mind-numbing boredom that is Kansas, while looking forward to the release of the LDS767 but not the hardware upgrade :) I find myself wondering; am I the only one that still flies 767PIC in FS2k2?Well technically I'm in Tero's 757 but that is niether here nor there :)Eddie D

Hi LevelDsim crew,I was reading the Operating Manual published in your website, and in the screen where the Menu appears, there is a "Instructor" function.So I try to read down the explanation, and it did not appear anywere, have you forgotted? :DSo, what it will do, please say me what I am waiting for :DThank you!!!BrunoArgentina

I've seen several mentions of the PIC 767 Flying Club. Where may I get more information? Thanks.

Could you guys in the development team (maybe Gary) perhaps do a render of this beautiful aircraft for us to drool over or set as wallpaper for our desktops etc.? I know I would like one.

Well I stopped in at another forum today. They were releasing something or other. It was like Here it is!! It's released!! The meaning of life is reveiled!! I started thinking, man I bet http://www.leveldsim.com/sevensix_home.asp is packed oday. What am I going to do. I then started looking around and realized, woooow this is the wrong site. Man that was neat.JimCYWG

Hi,I was wondering how to calculate equitimepoint(s)For example: KLAX to PHNL then wat is the ETP point for that route???And is an ETP based on windforecast or just on NM???Thanks,

What would be a greater way to introduce the world of Flightsimming to a new JET than to have it participate in The RTW Race! on its very first days out.What do you think LevelD Beta Team and Wade....I know there is some work to be done but is there a possibility this could happen???Ill be happy to fly a segment for you.Regards

Hi all,I recently proposed the idea of a 'Fly-out' from Everett field once the LDS767 is released, it seems to have found some favour with people so lets start planning!ANYONE who wishes to be part of organising feel free to raise your hand, I've not been involved in one of these before! ------------------DATE: Obviously we have no idea when release is going to be, albeit a general idea of it being pretty close. Bearing this in mind we will need to look at getting planned nice and early, the airplane could be out tomorrow after all. :) The best compromise is to schedule it in for the weekend following release. If we put it on a Saturday evening GMT that allows most people…

Hi,I was wondering if there will be an abnormal checklist avail with the release of the 767???

Will Level-D and/or Navdata.at support with AIRAC and SIDs/STARs for the B767v2?RegardsHakan

The terminal procedures for cycle 0502 are available for download at http://home.sw.rr.com/filesherenow/index.html.EnjoyTerry Yingling

Hi,A question about Pegasus FMC.Does anyone know how to decode these references? Is it possible to change any of the functions on the PIC 757 FMC version ie offpath descent?3418HNP02C083461BCG00TF2

HI, I'm new to PIC 767, I've found a lot of sids and stars and app procedures missing from the fmc database. Anybody knows the coding for writing .wsd .wap and .wst files?Is some software needed for that?Is there any tutorial about that?Thank you in advance for your help.Best regardsgcj

Will he be included a load manager in the 767 Level-D? Thanks...

I currently have an 'analog-type' CH Yoke product and was wandering if it is worth upgrading to the 'USB-type' CH Yoke. Would it be worth it to upgrade even further if there is not that much difference in the (analog vs.USB) type and get another brand?If it is worth it to upgrade to a different brand, does anybody know of a good yoke that would really fit in nicely with the upcoming release of the LDS 767 ?? There hasn't been any new releases on Yoke products in quite some time....Maybe there is no need to concentrate on this aspect of the simulation, but I would like to have one that is a little more realistic than the CH analog type that I currently have without putting…

Hi there,I've created a flightplan for all of you who are interested in flying a simulated delivery flight for British Airways from Everett, Payne Field (where the 767 is produced) to EGLL, London Heathrow (where the BA 767 fleet is based). Obviously we don't have weight data for accurate fuel burn as yet but the actual route is acceptable. The route itself is North-east over Washington state and into Canada, continuing over Canada, Greenland and Iceland to Stornoway in Northern Scotland. From Stornoway we route on UN615 to HON (Honiley) VOR near Manchester, where we will commence the BNN3A arrival into London Heathrow.No need to worry about NAT tracks as the route is …

Hello everyone,I am eagerly anticipating the release of the LDS 767 but I was wondering if anyone was planning to make a tutorial video to help people get fully acquainted with the systems and instruments of the 767-300ER. I know there is a pdf manual already release, but I think a visual presentation would be more interesting and informative to watch, also it would give a clearer outline of procedures throughout a flight.Cheers ;-)Denis Allen