MS FSX | FSX-SE Forum

Hi, maybe someone has better experiences with AI...I've downloaded and installed the worldtraffic AI file and it works very well but it seems to exist a problem in FS2002:all of the world traffic flights start at GMT time. And when I start a flight for example at Frankfurt (EDDF) at 6:00 AM GMT there's no aircraft on the taxiway to the runway or waiting for T/O clearance at the runway. All the flights from 5:00 GMT have not departured - all of them want to get their clearance and then a huge snake of aircraft is taxiing to the rwy...Is that a problem in FS2002? It's really a problem to get your own clearance because of this huge amount of requests...Can anyone help?Chris

Hi everybodyThe clouds in my fs are like vertical sheet Is there any way to correct this problem?(i am using rage 128 pro gc)

Hi All.I had to re-install FS2002 today :-fume :-fumeWhat a royal pain when you have everything setup just right.What is the newest version of FSSound.dll. My version is 1.5.0.0.I have done the OLDMODULES thing in the FS2002.cfg but a lot of my sounds are still not working, FDPA Gear sound, trim sound and so on. :-grr :-grr.Any help here would be great. If someone has a newer version could they email it to me please!David Duffy TWF268 Timberwolf Air: "Anything, Anytime, Anywhere.We Deliver." http://www.timberwolfair.com/

Since last Thursday bad connection with FS meteo weather servers from the Netherlands, long download times and even timeouts impossible to download World WX and stay offline" :((sent today an email to Marc)Any one experience the same problem? Does anyone now a link to download alo/dat/met files?No problem with any other internet connection/download etc... :-)Thanks awfEHAM

Hi,is it possible to change the AI aircraft files to make the strobes flashing and the lights on at DAY too?How does it work and what I have to do? At most airports in Europe the position lights of all aircraft are ON.Want to change this...Chris

Hi guysAmazing how you can never have a particular problem yourself and yet see lots of them on this site. I must be honest and say that I do not take too much notice if they do not affect me (there but by the grace of God go I !) Tonight after flying for weeks in the Debonair or the Archer I decided on a slightly longer flight and chose the Baron for the trip.But I can't get my CH yoke to see both engines for Throttle, Props and Mixture. Always behaved itself until now. I've tried E + 1 and 2, Shift E + 1 and 2, Ctrl E + 1 and 2 but to no avail. I have tried to calibrate in FSUIPC but no joy here either (actually I'm not quite sure how to do it in FSUIPC !).The yoke a…

Am I wasting my time and $$$$ upgrading my Rambus memory from 512mb to 1024mb. Will I really see a difference? FS2k2 is the most graphics intense program I have and it still seems to bog down with certain sceneries and I'm try to get little more bang in FPS so what do you think? Will more memory help? I'm averaging about 25 FPS, but it does bog down to 8,9, 14 FPS at times with alot of scenery going on and this is not with everything "maxed" out! Seems as though it should stay more consistent. My specs:P4 1.8aAsus P4T-e512mb Mushkin Rambus (upgrading to 1024mb)G4 Ti-4600Win XP homeEtc, etc.That's the "juice" of the matter anyway.....Thanks!

Hi all,I need for building AI-Traffic a DC-10 Hawaiian Airlines for FS2002. Perhaps somebody have this aircraft already or knows where to download. I looked in AVSIM and Flightsim.com, but no success. Thanks in advance!Best Regards and safe flights!Holger (German Eagle) SchleenhainRuesselsheim (near EDDF):-wave GERMANY :-wave____________________________________________________________________Windows XP Prof.AMD Athlon 1330 DDR-266; ASUS A7A266; 512MB-DDRASUS AGP-V8200 T5 Pure (nVIDIA gFORCE3 Ti 500) 64MB DDR-SDRAM, Det. 23.11SB PCI 512CH Flight Sim Yoke USB CH Pro Pedals USBGoFlight-user

Hi All,I know here is a huge difference (not only in price) between the two GeForce 4 series (MX and Ti). But it's also common knowledge that FS2002 like its predecessors is compute bound. In general this means that there is not much difference in performance (framerate) between different videocards. So the MX series of videocards might give about the same FS2002 performance as the Ti series, but for less than one third of the bucks. :-eek I see many posts in which systems are compared using general or graphics benchmarks, but in my view this doesn't make much sense with respect to FS2002. The only correct way to compare FS performance is to use FS benchmarks under strict…

I am not big into AI -but have mostly noticed AI aircraft on the ramps as being Microsoft default aircraft.However , I just taxied into an airport and there sitting on the tarmac was a FEDEX Cessna Caravan. Now, I have a FEDEX repaint of the Caravan in my aircrafts folder -- so this leads to my question .Thanks Barry

It just happened. My drivers are okay, its enabled etc.http://ftp.avsim.com/dcforum/User_files/3d0d4ce639baa4a3.jpgits supposed to be in the center. I've tried calibrating it dozens of times using the directions shown but it doesn't work! Please help! I'm using a Primax Raptor 3D joystick.http://www.someplacesomewhere.com/uploaded/9vsve/dlsig.jpg

I installed the LGA2002 scenery and while it looks fantastic, I am experiencing some strange issues:1. The shoreline washes up on land (i.e. the wave animations are playing on the land - even all the way up on the runways).2. The yellow terminal lighting blinks on and off erratically like a string of x-mas lights. Not sure if these are actually supposed to be cars (???) - but I don't think they should be blinking.3. Exceedingly low FPS at dawn and dusk (~5). ~15-20 at other times. Static scenery is NOT installed.Anyone else noticed this?J

Hi guys,I hope this hasn't been beat to death but couldn't find a specific answer in the archives. I've got a 700mhz Athlon and a thinking of upgrading to a 1.1 TBird for $85. Is this worth it? I've got most sliders maxed now but am a little jerky around bigger airports and lots of AI. Also leave multi-texturing off to gain a little speed. The card I have is a TNT2 Pro 32mg. I would rather not have to upgrade the card right now if it is more expensive.Thanks for any help,ToddKCOE

Just got this bird and noticed 2 things:1. my main panel is broken? - I didn't choose to replacethe microsoft minipanel during the install - what is it andcould it have caused my problem?2. anyone have poor FPS in spot view if close up - say 40 feet fromplane?Thanks,Myles

Has anybody seen this??Please check out this, is from the incoming project of Wilco AIRPORT 2002 and A320 PIC, It's a new engine for animation in fs2002, looks unbelievable!!, what kind of machine do they spect us to have to run things like this??They also promise new Lightning system looks awsome, hop to see it soon!!!Human Movements, Cars in the roads, even the trees moving with the wind?? Please check this by downloading the video demo at http://www.wilcopub.com/intro.htm

Tks GuysBobG

I just installed and test the new detonator 29.42 for XP with my Gforce 2 mx400 max and that is a definate improvement from before just if nobody new this it is worth the download ,as a result of this no more repainting today ,I am going off to fly :)

Hi y'all,does all 3rd party terrain mesh have those silly measurement gridlines frm high altitudes?What mesh would you recommend that is raesonable on framerates?Thx fr any help,Alex

What is a good 737 panel with working stop start switches and side views?Thanks,Ron

Ive had FS2K2 for about 6 months now. I have all sorts of nice add-ons etc. One of the things I have recently started using more of is clouds and weather. I have noticed a peculiarity in FS concerning how clouds get displayed and Im curious if others see this effect also. What happens is I get the cloud cover displayed only out in front of where Im headed and its only a few miles either side of my flight path. If the cover is thick enough its not so noticeable underneath the layer. Its very noticeable above it and it kind of bugs me. It happens with default clouds and the add-on packs i have tried. I have gone to 100% coverage and it still happens. Does anyone else see t…

I just added side views (a320_views.zip) to the A320 panel I've been using (a320pnl2k22.zip). It mostly works fine, but when I return to front view after looking around, I'm left with remenants of the last view I looked at. Can someone help me solve this?http://mywebpages.comcast.net/mluzzi/320pnl.jpg

Can soneone tell me how to shut down the engines on the 737. Thanks JerBear

To slew I hit Y and the plane begins spinning to the right. Num Lock is off, but the slew keys seem not to work. Must have some setting wrong. It didn't always do this????

I absolutely love the 421 from the standpoint of outrageous beauty, great dynamics, and complexity. However, I notice the propellers don't refresh fast, it seems. In the spot view, and the right front/left front hat views (cockpit), the propellers seem solid....then slowly they finally "texturize". I have an Athlon 1.4 and 512 of Ram. I usually don't have any problems, although some 3rd party planes may refresh slower than others.If you have this same situation, please let me know...and also any ideas to eliminate it. Thanks, Stan

I would like to know if anyone is using a similar computer to mine, and what their frame rates are like. I'm not too thrilled with the frame rates I'm getting, which is on average of 9 to 14. I can't figure out why. I used to use an OLD P3 450mhz. I am currently using a P4 1.7Ghz, but ain't getting much improvement. I would appreciate anyone's help. I'm currently using the computer listed below. My display settings are as follows.Texture Quality = HighTerrain Mesh Complexity = 75Terrain Texture Size = MediumAutogen Density = Extremely DenseScenery Complexity = Extremely DenseDynamic Scenery = Extremely DenseEffects Detail = HighMaximum Visibily = 100 MilesWater Eff…