MS FSX | FSX-SE Forum

Hi... I currently have AFCAD v 1.1 I believe there is a newer version but I am unable to find it. Can anyone tell me where I might be able to download it? Thanks!!John-Paul

Does anyone have any AFCAD files for Luton (EGGW) the Gary Summons version and Seattle (KSEA) from Wilco's Airport 2000 v.3? Can't seem to find them anywhere. Help locating them would be greatly appreciated, or otherwise you can mail them to me at [email protected] :-waveMisha

To most of you, you'll probably wont care, but this will be my last post in the forum for awhile. With the new year comes some new changes, and one is going back to school...Hmmmm I wonder if they can teach an old dog new tricks?Anyway I am heading back to school to become a paramedic. Its something I have always wanted to do, and I finally have the time to do it. Its going to be a part time venture as I am still working full time, the pay for a paramedic isnt all that great here in Kalamazoo, but with my wife's 99 year old grandmother living with us, it will give her a peace of mind to have someone other than her daily caregivers, in the house with medical experience.Cla…

Hello guys.I was wondering to know if somebody can tellme about new sounds for 737 ,because the fligh simulator default sound its too ugly!I am sorry but its true.I made a flight other day ,and a try to compare the real sound and the flight sound ,nothing in comun.From the outside its even more diferent ,the start sound its complety different.If someone can help-me.I travel in a 737-300 with a CFM.

I've just replace my GForce 4 440 with a GForce 4 Ti 4200, this new card supports resolutions beyond 1600 X 1200 however FS2002 Pro setting only go up to 1280 X 1024. Can someone tell me now to fix this or is this the highest resolution that Fs2002 supports. I tend to dought the later because CaptainSim just released the 727 and their recommendation for resolution setting is 1600 X 1200.Bill

Hi evebody.I am having a diferent problem.When I install any gmax aircraft there is not the defaults from flight ,in some moments my target of frames goes from 30fps to 5fpsSoul I need to restart flight to back to normal again.I am using the detonator40 ,in a geforce3.Thanks ,regards and sorry my bad,bad english.

When A/P is selected with or without LNAV, autopilot simply disengages. I recall this problem some time ago but not recently. Any solution is appreciated.Note - Message posted here since PSS will probably not post or wait 10 days or more.

Does any1 know how to fix the vanishing tarmac-probs?This is Almeria Spain.

Hi All. Does anyone have this plane, and if so,is it worth buying?I know it does not have all the FS2002 effects, but is it worth considering?I have the FSD Piper Cheyenne 400, and it is a great plane, but I am looking for a good GA plane. I may look at FSD's Seneca V, but I was looking for a single engine plane.Any feedback would be cool.Thanks.

Hi,Anyone know anywhere I can download airport chart for japanese airports?.Thanks in advanceDan.

Is there anything special that needs to be done to get the panel displays to show up in VC model on these models? I have the PSS Airbus and the VC shows up fine when I switch to VC mode. All I get is the outside scenery view on the two subject models. Help!Keith

After long use with no problems, I have suddenly had my joystick (MS FFB Pro)go dead in CFS2. It appears fine in all the obvious checks in settings, and it still works fine in FS2002.Is this something simple and obvious I can fix. Needless to say, I am desperate not being able to fly!Thanks to anyone for helpI posted this also on the combat flight sim boards, but thought it might be a more general issue that some expert here might be familiar with.Ojisan Tuck

I will nolonger be building FSDS2 planes after the completion of the lancair4 I will shelv all other projects forever or until I learn enough about FSDS2 then I will begin building FSDS2 planes. Then and only then willt hink about building FSDS2 planes agian.

It wasn't pretty, but I passed today. The wind was brutal over the Chicago area, 240@14G22 when we took off in the early afternoon--quite a lot for a novice pilot in a Cessna. I thought beforehand that I must be crazy to go through with it. But go through with it I did. I definitely broke a sweat on the soft and short-field landings. If anyone is familiar with Palwaukee (PWK), you probably know there always turbulence as you cross over the trees on short-final to runway 24, even with moderate wind. Fortunately the inspector was very fair and took conditions into account.Actually, although the experience was nerve-racking, it was also kind of fun. The inspector is a…

Hi all :-waveAnyone with FS2002 and Norton Utilities use the 'move folder to frontof drive' option, notice any improvement or is it necessary at all?thanks for any info :-)Steve

Go to the new d/l and get this great scenery just put out by Vladimir Svoboda. He has done an excellent job of recreating KMEM. He has everything in there. You FEDEX pilots are gonna love this scenery as will the NWA guys (I think it is still a hub for NWA?). Very nicely done. Large file though so bewarned (10MB).

Hi, I have installed this scenery with nova gold textures and so forth and the airport is just beautiful. However I keep getting "scenery not found- some objects may not show" I see that there were other posts about this problem in the forum and it has been suggested that the tree.bgl file be removed. It seems though that there is still a problem even after doing this step. Anybody know anymore about this in case the author is un-available to reply? Such a great job on this airport and I hope there is a patch or something comming. Thank you, S.

I remember seeing pics of it but can't remember when and from what site...When I try to use the search function my computer hangs (gotta love AT&T!)Thanks!Shane

Newby here. With the help of rgerdes1 I got my Beaver 7 package installed, however I don't have the guages. The engine guages for the center console are there. The guages appear to be installed in the right guages folder. When I go to maximize window and hit 'W' the guages show there. The other problem is, when throttled back to land, the AC just floats. Forever. Wont stick. Any body have an ideas to help this rank amatuer flight simmer?

I have the Steven Grant Otter 3 pack (wheel, float, ski) and until now have only flown the wheel version. Now I have found that the floatplane won't float. A quick examination of the "contact points" section of the aircraft.cfg file reveals that it does not have any floats ( type 4 points) .Could somebody kindly send me or cut and paste the relevant section into this forum so that I can work on the problem.At the moment , the contact points appear to be the same for both wheel and float versions - but the float version does have the correct figures for it to sit up straight instead of those used for the tail dragger .

Okay, so I've been hit too many times in the head... I'm a little foggy. I need some help... ;)I d/l'd the excellent Project Fokker models, as well as the panel and sounds. Everything is beautiful.My problem comes on taxi to the runway. I thought I'd done everything I needed to do, but as I'm heading out to the runway, I'm noticing that my elevator trim is at the bottom. Sure enough, the elevator assembly has slumped down in back. I'm thinking this is not normal.Is there some sort of electrical or hydraulic system I missed? I've tried trimming the elevators back to level position, but I can't get them to move past a certain point, and then they slump right back do…

I did a search on "Otter" and got only 1 hit --I find it hard to believe that the word OTTER has not been used somewhere in this forun during the last 12 months.Barry

Looove these MelJets!How does one "walk" through the cabin? I can see it but can't get to it.Thanks,Mike

GA Traffic Maker has now been updated to version 1.1.6. This version fixes a few bugs, and by default will only generate flight plans to towered airports. You can still generate flight plans to all the OTHER airports as well with the push of a button. The update has been uploaded to the major FS libraries, where it should be available shortly. It can also be downloaded from my website below. (Hit refresh if you don't see a January 7 entry.)- Caphollandhttp://caphollands.fsgateway.comhttp://jdtllc.com/images/RCsupporter.jpg

Howdy!I am thinking about upgrading my sound card. I currently use the Creative Labs X-Gamer 5.1 Live card. This is a good card, except I get some stuttering in MSFS when using this sound card (even with the acceleration set to BASIC).I am really considering the new Audigy 2 Platinum due to many of it's features. Are any of you fine simmers using an Audigy card? If so, how's the performance as related to MSFS?Anyone using a different card, feel free to give your input on that one also!Thanks!Scott :-)My current system:PIII 1GHZ with 512MB SDRAM, 120GB Hard diskGeforce 4 MX440 64MB, Dual 17" MonitorsNvidia Driver Version 4109Windows XP ProCreative Labs Sound Blaster Live! …