MS FSX | FSX-SE Forum

Hi all,I've been looking around for a good payware twin for FS2k2 and I'm kinda partial to FSD's Seneca V in particular. (Not to mention that Flight 1's Cessna 421 eagle is much more expensive.)I was wondering if anyone who owns this aircraft could give me some insight as to how you like it or dislike it.Thanks

Hey folks,I reinstalled the DF734 today, but I'm continually getting the following error:Run-time Error: 55File Not Found.It happens when I load the FMC. Does anyone have any suggestions? I've installed, reinstalled many times today without luck.TIA. :)

Hi there all Simmers,I was just looking at a couple off screenies of some guys flying at Vatsim, but i have just got no idea how to make it work to fly (MP) flightsI have just downloaded R.W./Pro Controller and Squawkbox and installed it.Is it possible for someone to help me to understand how to make some flight at Vatsim?????Want to try some realistic flights :) for onesRegards,L.JimHotmail => [email protected]

I have just purchased a 2nd monitor - when using fs2002 and i try to drag a window (i.e controls or map view) on to the second monitor, it seems to reduce frame rate and is completely un playable!Do i need to set up any settings etc?Thanks in advanceMatt

A good site for plane spotters is www.palnespotter.orgYou can put up your shots or just look at other peoples

I just downloaded the new FLL scenery in the library. All I can say is WOW! Very well done. I used to fly that area for many years and this is one of the best improvements I have seen to any area. The author, Michael Ruehl, has corrected MANY things that was wrong in the default sim. He even included the draw-bridges along the Intercoastal, and yes, they do work! If you are a South Florida aviator, this IS the scenery for you. Hey Mikey...how about doing North Perry???? (hint-hint) :) Thanks Michael for such great work!!!!!Don Moser

hiWilco has released the patch for the A320 today. feel free to download @www.wilcopub.com.one word to the performanceit still sux :( on a p4 2.8 GHzcheers

I remembered reading a preview or review awhile back on MSFS2002 and it mentioned something about a feature that shows wear and tear on the aircraft when they are flown for awhile. Is this true? If so how is this feature activated in the sim? Thanks.

Does anyone know where to find an Inter European A320 re-paint? The one on the free video with the A320 pro package by PSS and Just Flight?Thanks,Aer Solas MOSCEO,Aircraft Management,Aer SolasAer Solas E-mail: [email protected] Solas Website NOW OPEN!: http://homepage.eircom.net/~solaer/home.htmhttp://ftp.avsim.com/dcforum/User_files/3e9079ec5ee914c2.jpg

Hi I know that it is possible to capture a flight and replay it in FS2002, but what I would like to be able to do is capture the screen image so that I could edit it as some form of movie. Is this possible and what software/hardware is required?thanksPeter

Neat stuff! It still needs a nice layout or interface and we're completely set. Rob "Holland&Holland" de Vries http://www.emotipad.com/emoticons/Flying.gif

*sigh*...seems as if that problem I was having a few days ago has returned ;( . Having loaded up FS 2002 and clicking the button leading to the aircraft selection screen from the main menu, the sim will crash to the desktop without any error message whatsoever. On a whim, I temporarily removed the last two or three aircraft I installed, but it did not help. I also tried launching a flight with the default Cessna 172 and then calling up the aircraft selection screen from the ALT menu bar, but when I tried this I got the "call home" box.Is there anything else I could do - perhaps delete the FS2002.cfg and scenery.cfg files and have FS rebuild them?Thanks,

Can anyone please tell me how I can start up at the gate with engine off and everything(trying to be as real as possible)? I'm loaded up at the runway with engines running and I can't find a place where I can change the default setting. Thanks!

Just flew from Panama to Quito using real world weather. It gave me unlimited visibility, don't remember the winds, but anyway the framerates would get choppy here and there. I think it's because of the unlimited visibility. If that's the case if I set my max visibility in the settings option to say 50 miles then got unlimited vis. next time I d/l RRW, would it give me unlimited vis. up to the 50 miles I set in the settings option? Just wondering if unlimited RRW would override the settings. I tried changing the RRW to 20 miles but it also seemed to change everything else like wind direction and speed. William

I always have a hard time reading gauges from most landing panels and have made a number for myself for various aircrafts and was wondering what some of you think of this larger type for the Cardinal? Like I said, it's to help when landing or on taxi and to be able to read the gauges without eye strain! Note: The gauges appear not very round in the screenshot but do look right in FS. And here's the default 177 landing panel on pic 2http://forums.avsim.com/user_files/3142.jpghttp://forums.avsim.com/user_files/3147.jpg[h5]Best Wishes,Randy J. SmithSan Jose Ca[/h5][h3]" A little learning is a dangerous thing"[/h3]AMD [pink]XP[/pink] 2200 |MUNCHKIN 512 DDR RAM |ECS[/b ][i] K7…

For a long time I have had the three levers on my CH Yoke programmed through FSUIPC to control engines 1 and 2 and reverse thrust. I am now adding a pro throttle and no longer want to use the 3 levers for their reprogrammed jet functions. Can someone tell me how to reset those three levers to their default settings. I seem to remember at least one of them had a reversed axis and one had weird null zones. Thanks!Boyd BarkerSenior Command CaptainKBOS Hub ManagerWestWind Airlines

To whom it may concern, that high-bandwidth (35MB) video about the FS2004 clouds seems to be downloadable now. At least I could get it here yesterday:http://www.microsoft.com/games/flightsimulator/weather.aspCheers,Siggy

I was browsing the Reality-XP site and saw their really nice looking products.I was wondering there is two different products they offer:1 - Flight Line Avionics v1.2 for Flight Simulator 2002and2 - Flight Line 530XP v1.1 for Flight Simulator 2002Now they both look absolutely awesome. I am just not sure which one is for me, or if there is any differences in them that would cause to buy one over the other. And how do they integrate into existing aircraft, freeware, payware, shareware and whatever else I missed?Once again I need you guys input and reccomendations. Thanks for your help. I have been hearing great things about R-XP and thought I would look into it.Thanks …

Hi there,I'm a bit surprised I haven't heard anything about this scenery enhancement. I'm just comming back from a PC fly-in at one of the CFI's here at Delta Aviation Academy, heck even the chief instructor had a ball (BTW, he loves to fly in spot-plane view, can you believe it :-) ).This scenery is the best I've seen in FS2002. If you want some time away from the heavy's try this add-on and flightsimming will never be the same ;-) This is what flying is all about, beautiful scenery, challanging short-/softfield t/o, and landings, the works. I used a Comair 172SP with RealAirSim's fantastic FDE.The detail is simply stunning, I can only imagine how much time Tom Constanti…

Hi i have this product there seems to be a missing texture here at this airport is there a patch or is there other files i have to have installled or what? please help with this problem

Hello,I've been an avid lurker here for years, but I haven't actually posted in at least a year. I hope that someone can answer a question for me... I just ordered a pair of eDimensional 3-D glasses and a new monitor. I'm wondering if I can set up a dual monitor system and use the 3d effect on the primary display and use the second display for 2d stuff (like any traditional 2 monitor setup). Can you read a normal display throught the eD glasses?If anyone is doing this, I'd love to know if it's possible.Thanks!NMS

Hello does anyone have the AFCAD for this airport CLK CHEK LOK KOK VHHH? If so can someone please e-mail me a copy of the AFCAD for it my e-mail is [email protected]

I am downloading FFS's new Extra 300L and I can not wait to test fly it I will post my results here.

I'm just curious as to whether the recent L1011 release added to the library offers wing views. Even if it doesn't, how to folks like it? I'm on the fence as whether to DL her, only due to bandwidth issues, as it'd be a 90 minute dl on my connection.

I read the review but was curious as to the 2 views offered with the 2d panel When using the auxillary view which allows greater visibility over the nose,if you look left, right etc, coming back to forward view you are forced back to the default 2d view. I remember that this was a complaint amongst many users. The reason Im referencing the latest avsim review on this bird was the author mentioned no cons. This made me think that Flight1 may have fixed the problem since it was not mentioned in the review. Does anyone know if there was a fix?RegardsBob