MS FSX | FSX-SE Forum

Just wondering if anyone can direct me to a possible solution to this problem: I have UTX Canada, FT CYYZ and CanadaSim Toronto VFR. The issue I have is that i have duplicate downtown Toronto buildings, such as the CN Tower. I have been searching for some time now and even on the UTX forums, but I can't seem to find which files to delete. I think it is UTX Canada that from which the conflict occurs, but no idea how to resolve. Anyone else have this issue or perhaps may know which files from UTX Canada to delete? Thanks in advance. Cheers, Pete

I want to do some field hopping around Austria like I used to do in FS2004. I REALLY liked my Austrian Airports (FS2004 packages) from FSQuality. I know they are not up to today's standards, but there were fields that are in no other addon packages. I installed them, but they don't work. I have black Objects that flash textures when I pan the camera. I have taxiways coming and going and it appears I have more scenery than the airport really has. (Maybe I have default scenery showing through?) I used the FAS scanner to look for duplicate airport files, and it did not find one for LOWG (GRAZ) which is my test airport. Details: Running Windows 10, FSX-SE I cop…

Hello! As the title suggests i need help with some wierd problems. i have enjoyed fsx steam for 3700 hours. After a fresh reinstall of FSX STEAM i have been experincing crashes 15 to 10 minutes into the flight, and i dont have any autogen/3d objects(buildings, trees, etc). I reinstalled because of the no autogen/3dobjects. but even on a fresh install and no addons, no tweaks in the CFG and anything else didn´t touch the settings, i get the crashes 15 to 10 minutes into flight (NEVER HAPPENED BEFORE even with addons and tweaked cfg) and oddly enough no 3d/autogen objects. Please help i am quite lost here. I have tried the UIautomationcore.dll thing and compatibility m…

So I've been flying raw data IFR stuff into and out of big American airports as a change from doing FMC GPS stuff. Its been good fun but I've run into an interesting thing where my VOR radials are apparently considerably inaccurate in many cases next to what the charts tell me. I've updated the magdec file to this year's and I've also updated some of the navaids using this utility, but the issue was present before and after that navaid update which seems to have had near zero effect on most aids in the US for my experience. http://www.aero.sors.fr/navaids3.html Whats interesting is that using the EasyNavs tool (http://www.aero.sors.fr/navaids.html) I've been looking …

Hi guys, I´m having this issue ever since I had to make a complete reinstallation of FSX. Apparently every time I try to fly in the NYC (And surroundings) Area the Sim gets kind of a freeze every 10 seconds or so (This freeze lasts for about 2 or 3 sec). I dont loose any Fps its only those lags which make the JFK and other NYC airports unflyable, also NYC is the only area where this happens, I´ve tried SEA, BOS, etc and in this areas everything is normal. Any suggestions? Thanks Guys

Hello All Is there any way of preventing FSX: and FSX Steam edition from sharing information? I was under the impression that if FSX was in a separate folder this could not occur. Please note, FSX-SE was installed 1st. My FSX folder is located in C:\FSX My Steam version is in the usual: - C:\Program Files (x86)\Steam\steamapps\common\FSX Both versions appear to share the Folder “Flight simulator X Files” which is in the Documents Folder. I have also checked the Settings - Scenery Library in both versions (Available scenery area) and they are both the same. Which is wrong because two new Steam addon airports are also shown in FSX. Wh…

Greetings all, I've searched the forums and could not find anything related to my issue, so I'm going to straight up ask. I noticed that when flying inside FSX:SE (PMDG or stock aircraft) there are "frame rate" stutters. You can see it as the ground texture goes by and when panning around the VC. I normally run FSX:SE in windowed, However, if I "task" switch outside the window, have FSX:SE visible in the background and use my hat switch, the panning around the VC is smooth and ground textures go by smoother then when i'm "in" the program. I've added a couple of videos to youtube to demonstrate what i'm experiencing Stuttering While Inside FSX:S…

Previously i was able to start flight with autorudder on for the purpose of taxing to the runway, and once lined up turn it off using "Autorudder On/Off" key. But somehow suddenly the key function isnt working anymore making it impossible to toggle autorudder during flight. Also, is it possible to calibrate the throttle of the attack 3 joystick to a more granular setting? It doesnt appear that the windows calibration tool registers subtle hardware changes, and only reacts to a new value after rotating a few degrees, which accounts for around 10% N1 making it annoying to control speed on final.

This is just really weird - I don't think it's an issue with FSUIPC because I don't have any brake controls assigned in it. Anyway, I'm taxiing the PMDG 737 at ESSA on VATSIM earlier, and my brakes just went haywire. When I press spacebar (to look around the cockpit, etc) it applies the brakes. When I press CTRL+Y (To change to mouse yoke mode) it applies the brakes and it does not release them until I press CTRL+Y again. (It is still happening even in midflgiht) This made taxiing/takeoff for me near impossible, since... I have no yoke or joystick or anything ... shame on me ;) I have absolutely no idea why it's doing this and I'm positive it isn't FSUIPC. Any ideas?

I ended FSX on Windows XP in 2013. I reinstalled under W10homeSystem and it seems to operate fine. The logfile-entrys are written normally except a omission, departure-airport. Editing the logfile.BIN manually with a HexEditor (f.i. filling in EHAM) the entry is read by FSX normally, but the next entry has the same omission. Testing the logfile.BIN with FSXlog.exe shows no malfunction. Is there a configfile malfunction and can this be repared? Please suggestions.

Hello all, Basically I've been away from the simming scene for about 3 years. I just rejoined today and purchased the FSX Steam edition. Previously I had purchased the 737 and 777 sims from PMDG. I simply accessed my account there and tried to re-download them. My query is how do I get them to work for FSX Steam. They were purchased for FSX ... surely there's a method to get them to work on steam? I did find a forum on the steam gaming site about how to do it for the 777 but it presumed i had already made some changes to files in my pc which I hadn't, and i couldn't find out exactly what they required to be done. I searched the PMDG ops centre but couldn't …

Hi. I want to fly from London Heathrow to Kai Tak but I can't find a route if anyone has the route can you give it to me please.

I hope someone will be able to help me add the ISG ND and Smiths fms to the panel and the fms to the VC. I would really appreciate it! I have no experience panel editing. Thanks guys!

I have deleted all of my FSX-SE Controller Settings for Keyboard, Joystick, Rudder Pedals, Mouse and X-Box Controller because I completely use FSUIPC for Keyboard, Rudder Pedals, and Joystick and I use my X-Box Controller for ChasePlane. I also Unchecked "Enable Controller(s)" in the Calibration window But I cannot figure out why the Enable Controller(s) automatically gets checked and many, if not all, of my Keyboard and Joystick settings get automatically put back in and I then have to go through the entire process of deleting them again - this happens many times. Is there a way to permanently stop these events from automatically happening?

Hey guys I am currently trying to setup model matching for vPilot and have so far not suceed. The reason for that is because WOAI downloader tells me that my AVSIM login is wrong, but I know 100% that it isnt. I have run the downloader as admin, Please help me.

Hello, Guys! The Real World Weather that updates Automatically by online through Jeppesen doesn't work at all in FSX. So is there any alternative free tool or something else which updates World's weather automatically in FSX? If it's then please tell me. Best Regards, AP

Folks When I load a saved flight, FSX always loads it with my system time, not the time of day saved in the saved flight files. I have 'use system time for free flight' unchecked, and that setting is reflected with in my fsx.cfg I belong to a virtual multiplayer flying club and we provide a saved flight for download every week. Other members have no trouble with their downloaded saved flights which always load at the correct TOD. Could anyone please shed any light on why my FSX-SE, faultless in all other respects, can't load a saved flight at the correct TOD? Many thanks, Phil

Well I screwed up. I couldn't get the FSX uninstall to work. After trying the Microsoft uninstall tool, I ended up screwing my fsx up, putting it in a middle ground, where it is installed, but parts of it are not. So I manually deleted the files. I could have avoided all this stupidity if I only uninstalled FSX using the disks. I can no longer install fsx, or uninstall it from the registry. What do I do now?

as stated having low frame rates. Corrected problem by upping to the nvidia evga 1050 Ti and upping to 16 gig on motherboard. a few tweaks with fsx.cfg and nvidia inspector Dropped down to 1 and a half monitor. ( 1 central cockpit, and one for naiads/gps gtn750 throttle quad, or port side for downwind/base vfr approaches. fly GA props from Arrow to light twins and TBM850 and RA Duke Turbine V2. No jets. real wx ORBX airports, old UTX USA ....A Happy Flyer now..

I've enjoyed the WofAI, following various flights and interacting as much as possible (providing military airports with mil_combat or _cargo parking spaces, etc.).. I've found that some AI aircraft are too high on approach and continue to go around or that they crash into the ground trying to get to the approach alltitude. In the first case, I've tried tweaking the .cfg autopilot setting for vertical speed but to no avail. In the second case, the aircraft was at FL320 20nm from the airport. Is there any way to correct erroneous flight situations in free flight? AI Controller seems to only relate to specific airports and approaches.

After a long break from flight simming, I am back and building a dedicated machine setup. I got the hardware I wanted and all set there. (Intel 7700K, liquid cooling, 16 gigs of RAM, nvidia GTX 1080, SSDs). I am reading through the setup guide pinned here for config file optimization. Now I am getting the environment back to something like I had before during my virtual sightseeing flying around Europe. I am getting new versions of some of the add-ons as they have changed, and I am trying to get my head around them. First, I have FSX SE with Active Sky Next (ASN). I went with ASN because I eventually want to use the PMDG aircraft that use the WX RADAR that work…

I have moved from FS9 to FSX and am trying to import some WOIA packages into FSX. However I am running into a major problem with some packages that are marked as FSX suitable and wonder if anyone could help or offer advice. For example I have downloaded the FSX Aigle Azur package and installed the entries in the correct folders. However when I run the Aigle Azur BGL file through AI Flight Planner the files validate but all aircraft in The Aircraft List Box are written in Red showing that there is a problem. The aircraft description appears identical to the description in the aircraft config file except for the addition of (200 kts ) in the Ai Planner aircraft de…

Chaps, Recently, the GS indicator diamond has not been showing up on the PFD on my RJ. Ive had it show up in the past, and seen it shown in Videos of other RJ users whilst carrying out an ILS landing. What am I missing, what have i not done? Several flights now i carry out successful ILS approaches, but the GS indicator does not show.

Does anyone know if this scenery is still available? If so, where? I did a search and all the links to buy it are dead. Did it go public domain?

I noticed today during a VATSIM flight that, especially on landing, my framerates were absolutely pathetic for a computer like mine (I was getting 9-15FPS on short final!!!). I don't know why; I thought I tweaked my cfg file pretty well. I have FTX Global and Global Vector installed and several other payware addons... Don't think it's that. I dunno, what do you guys think? MY SYSTEM SPECS: Intel i7-7700k overclocked to 4.6GHz, cooled by a Corsair Hydro H55 Water Cooler 16GB of DDR4-2400 RAM (With XMP enabled) NVIDIA GeForce GTX 1050 Ti (All drivers up to date) 1TB Seagate HDD And here's my FSX.cfg settings: [JOBSCHEDULER] Aff…