Carenado General Forum

I really enjoy flying the Waco having flown one in real life. However, on a long flight it can become tedious. In P3D I had no problem adding an autopilot but in MSFS I haven't come up with a solution. Is there a way to add an autopilot, even just a wing leveler? Do not need the instrument itself, could just control via the keyboard. Thanks Dave

Hi Guys, Anyone know if you can swap the option to use the PMS GTN 750 with he TDS version on the Cessna 337 in MSFS 2020

Hi all. I was wondering if someone could help me. I have been configuring my caranado pc-12 on MSFS and am unable to change the altitude knob to vs mode. I have looked at autopilot guides online, and they have been able to push the button and change it to vs mode, whereas I am not. There is no option to press the button down, or to pull it out, but to only twist it to increase altitude. Any help with this would be greatly appreciated!

Just bought the PC12 for MSFS 2020. Absolutely love this aircraft except for 1 problem, when I'm in cockpit view and scroll in using the mouse scroll wheel, I'm unable to scroll back out. Is anyone else having this problem with the Pilatus PC-12 or know of a solution to fix it. Thanks!

Hi is there a way of tuning .5 KHz on the Seneca ADF? If I wanted to tune the Teesside NDB, for example, I can only tune 347 and not 347.5 at the moment. Cheers.

Hi All, Its been a while since I tried using it, but I can't get the kneeboard / ipad up on the CT182. I used to click near the centre of the yolk but it's not there anymore. How do we get external power now?

Hi there, Any plans to bring the Citation XLS+ to MSFS? you have a big advantage it uses the same avionics as the CJ4 so you only have to worry about the flightmodel. Would love to see this aircraft in MSFS., I enjoy flying it so much in P3D. thank you! rgds.

Hi, I have resolved the problem of weather radar deleting the. dat files and xml file now the storm clouds are visible on bendix wx radar of Seneca V for msfs 2020 but some buttons appear with inop on it not working. Why? Thank you

Dear community, as we already have the ATR 42/72 and many other turboprops, it would be interesting to have the Dornier 328 as well. The plane is/got used by Sky Work, Welcome Air, Sky Alps, Rhein Neckar Air, Sun-Air of Scandinavia (British Airways) and many other operators. Carenado is one of the best developers of turboprop aircraft, and having a Dornier 328 in Carenado quality is a dream. If you can agree with that, please leave a comment. Regards, Aviator_Kevin_HD

Would love to see these redone for MSFS. I was endorsed on type. A beautiful aircraft to look at, and to fly. Very aggressive stance on the external views too. I used to love the Carenado representation. Would love to see it return.

Does anybody has heard anything regarding ETA of Carenado's PC12 or their own King Air 350 with the PL21 avionics? Have to admit that I rarely fly anymore. I am only into turboprops but hate the Daher and Asobo's KA. The little flying I am doing in FSS2020 is in the C208.

I recently had to do a factory reset of my computer and have been re-installing all addons. I just tried flying the King Air 350i, and the altitude callout “40” is playing continuously, and I can’t stop it. I tried deleting, re-downloading, and reinstalling with AV and firewall OFF, and I tried a flight to a full landing to see if that could “reset” the call outs. No luck. Any ideas folks?

Reinstalled P3D v5. After installing both the Cessna 337 and the P350 Chieftain i get the same issue. The mixture control levers in both return to cut off no matter where I move them to. They snap back to the cut off position no matter what. Thanks in advance for any help.

Does anyone know if Carenado is going to offer an installer for Flight1's new Garmin GTN 750/650's so they can be placed in panels in place of either Carenado's or RXP's GNS 530/430 units?

I have been through several tutorials on setting up the honeycomb bravo throttle quadrant - bought 3/22 - and the altitude adjust does not work on autopilot panel although it does work in the 172 g1000. Have been over it several times and still doesn't work. I like carenado planes - the look of them and the feel of them (used to own a 1975 182) but they are so buggy all the time and I have had no luck in getting the avionics and autopilot to work for more than a few weeks at a time a time until another updated thru the market place. very very frustrating and I don't really recommend them because they are so buggy even tho I have 3 of them. anybody else have this p…

I want to use the Carendo 390 with my P3DV4.5 Cockpit. Can anyone tell me if one can view the code of the gauges to determine the communication between gauges. LVARS, FSUIPC offsets, etc. Don't want to pay $40 if I can't use it in an Arduino and Saitek based cockpit.

Hi folks, How can I start the cockpit in cold and dark? I’ve seen in certain videos on youtube an EFB configurator type screen - how do I get this to come up in MSFS? Thanks

I can't find a topic category for this specific airplane so I am posting this here. I recently purchased the C404 Titan for X-Plane 11 and I can't get it installed properly. I didn't receive any instructions for installation so I just cut and pasted the aircraft's folder into X-Plane's Aircraft folder. I also have an Alabeo PA23 Aztec in which I installed the same way and it works fine so I don't know what I'm doing wrong. When I load up X-Plane and go to select the aircraft, it does show the plane but there is no picture or icons of it. It just shows a greyed out question mark where the pictures of the plane should be. And when I try to start a flight with the plan…

Hi folks. I’m looking for some control help. I want to map the AP pitch control wheel on the Cessna 337 to the up and down on the pov stick. I’ve tried mapping it to increase and decrease AP pitch, which seems obvious, but the pitch wheel doesn’t move. I also have a roller control on my flightstick, but the roller doesn’t work either. It does work with the trim wheel, so I know it’s not a fault. Using the pov for the trim wheel also works. Has anyone else been able to map a control to the AP pitch wheel?

I was trying to install my copy of your PC12 into P3d v5 and I get an error message saying the serial number from my dashboard has no more installs. I did not have this problem with any of the other aircraft I downloaded for v5 installs. How do I fix this? Franklin Duncan

Hi, I recently installed the Carenado 337 in FS2020. After 30 or 40 minutes flying, all electrical things turns off, as in real life, alternator goes out. Have tried cycle Alt switch, Batt switch and nothing restores, all electrical stuff goes out like, gps, radios, lights, flaps, etc. Any one having this problem? Any solutions? Not any failures programmed.

Purchased today, but unable to run on MSFS. It downloaded from the marketplace okay, and I can select the aircraft in the create flight screens, the pre-load pictures show the aircraft at the airfield, but on opening it's a CTD. Re install tried - but so far I cannot operate this in game. Is this a marketplace issue? Any ideas I would be grateful for. Many thanks, Gary

I have imported the Carenado M20J from my Steam FSX into both Prepar3d V5 and MSFS2020 (note I imported into P3Dv5 first then from there into MSFS2020). Although the plane is (VFR) flyable, a great many of the instruments are missing from the dashboard. When I turn on content logging for prepar3d, it is quickly obvious that the issue is the gauges are all in 32 bit dlls (Money20F0.dll, Money20F1.dll, Money20F2.dll .... and RadioMoney.dll), and "A 64 bit version is required". Is it possible to recompile the Money M20J as 64 bit, so it fully works in P3Dv5 and msfs 2020? Note, I have purchased the newer Carenado Mooney's for P3Dv5 and MSFS2020, but I fly a M20J in …

Does any one know what file the aircraft tail number info resides?? In most aircraft it is located in the aircraft.cfg file, since Carenado doesn't have that format as far as I can see in their aircraft folder how do you change the tail number for any of the planes? My new paint work.

It looks as if it doesn't have a glide slope indicator -OR- what am I doing wrong? thanks Yall.