Carenado General Forum

I have purchased the Carenado C210 MSFS2024 from Microsoft in Marketplace of MSFS2024. Since I owned the payware version way back in FS9, I just love this aeroplane. I do have problem with this one. On both GPS's (GNS 500 and 430) there is a knob to change from COM to VLOC. You have to press this button (PushVC) to switch between COM freq and VLOC freq. This knob does not press. It stays selected for COM freq. You are able to turn it and select the correct frq, but it does not allow you to switch to VLOC freq. Anyone who can help? Thanks in advance

Carenado support has emailed me to state the external covers etc. in MS2020 are only removable via the tablet interface. Where's the tablet ? Doeas anyone know ?

Hello everyone! Has anyone purchased the C210 for FS2020 who has already used the P3D version in the past? I have a custom made livery for the P3D version which I would like to migrate to the MSFS version, but before I spend money on the aircraft I want to know if both are compatible. I mean, if I open a texture dds from the FS2020 version and paste the corresponding texture from the dds from the P3D version, will they coincide? I want to use my personal fictional livery, but I don't want to do it again from scratch. Wanting a high-wing for 6 occupants and having missed it on FS2020, I ended up going to the SWS Kodiak and doing the livery on it, but I …

Hi. I don't see any posts on this aircraft newer than 2016. Hope someone who flies it is watching 🙂 I've been practicing steep turns and stalls. Everything seems close enough to the real thing. I am doing my flight review in one so this is valuable for instrument scan and horizon practice. For stalls, it behaves mostly as expected except for one thing. There is no buffeting or pre-entry behavior to respond to. It gets very mushy but the nose remains up as the stall warning is going off. The only possibilities that follow are entry, incipient and developed phases. There is no other feedback. Real 182s are hard to stall. Sometimes we just give up…

Hello folks! Some one knows where can I find a MSFS2020 paintkit to Carenado C182 RG II? Thanks!

I purchased the PA28-181 Archer II from the Microsoft Marketplace yesterday and am trying to get it to use my RealSimGear GNS530. How can I change the panel display in the sim to use the 530 instead of the 430 so that I can pop it out to my RSG 530? Does this plane support the 530? I also created a support ticket with Carenado support on their website asking about it 3 days ago, but no response. I'm new to MSFS 2024 so I'm not completely familiar with it yet. So any help or guidance will be greatly appreciated! 🙂 Thanks! Eddie

I realized that the C208B Caravan has a buch of switches that stoped to work. My Seneca II now shows the pilot in the interior cockpit 3d view, making impossible to fly in a feasible view and a lot of features stoped working. Anyone else?

I know that officially she is not for P3D5, but all other planes compatible for P3D4 works fine in v5. With that hope i have purchased her from Carenado, and installed into my P3D5. Strange thing is that inside cockpit i do not see plane body, just seats, gauges, propeller. Outside view shows full plane without issues. Is there any procedure to install her into v5 and have plane fully working?

Tonight I have a "NO LIC" error on E55P Phenom PFD. I have not seen this before.. What does it mean, and can you suggest a remedy ? Thank you, Ken

Hi guys, I may be missing something but each time I fly a Carenado aircraft and select the TDS 750 GPS via the tablet it does not save...I can use it for that flight with no issues BUT I have to select it each and every time, is there a way for my preferences to be saved? Dave

After I purchased and installed the C182RG for MSFS, the aircraft panel shows up but the radio and GPS screens are blank (looks like they are powered off although the switches on the panel indicate on). The autopilot works with key commands but no display. I opened my C337 and the same issue appears. The C337 worked fine until I installed the C182RG. I uninstalled and reinstalled both aircraft with no luck resolving the issue. Any ideas on how to fix this? -Mike

Hello all, I'm trying to figure out how to use the Bendix King KAP150/KAS 297B in Carenado's Famous Flyers Beech Bonanza V35B in order to set a desired altitude, set a vertical speed of my choosing, and then have the plane fly to that altitude at the desired vertical speed. I have read the Bendix King manual and watched videos of IRL demonstrations but one specific thing in the Carenado plane is not working the way the manual and videos show: **Whenever I push the ARM button, the autopilot immediately sets a 500 FPM vertical speed rate up or down no matter what, and immediately starts climbing or descending.** As I understand from the manual and videos, choosing an a…

Can someone please tell me why on earth Carenado makes me get them to reset my install count. For heaven's sake, I bought the product and should be able to install it as many times as I please. Come on Man!

Hello, I recently purchased Carenado's new 182RGII but when I turn on the avioncs switch my GPS and radios are just completely dark. I have tried re installing the product but nothing. I switch to other Carenado aircraft and it's completely fine. I'm not sure what the issue is.

Bought this as I loved it in P3D. But, I'm not seeing the avionics at all. Anyone have an idea or how to get help for this? Thanks Avionics screen is pure white.

Hi Why most Carenado aircraft landing lights work inefficient and unrealistic? I mean they start illuminating the runway from nothing, all of a sudden just after touch down which is useless. Carenado Bonanza has a good landing light but most of pipers and other products not. Arent they supposed to illuminate the rwy way before landing so to guide pilots to land? is there any way to adjust them? Can we change the angle or type of lights in a cfg file? Can we use lighting file of another aircraft installing it to the one we want to our own satisfaction while keeping it private and never share the file? I have taken screen shots but unfortunately can not at…

Ok, Picked up SVS while on a Carenado buying "spree". I'm installing it into p3d v5. Here's what I've done so far.... Installed SVS Ran the Carenado P3D v5 patch Uninstalled and then Reinstalled the Piper Meridian Ran P3D, choose the Meridian, "Allowed Access" for the SVS through the Firewall. .....nothing... I have no SVS on my Meridian, when I click the PFD button and enable SVS there, I get nothing and, of course, I still have the Terr Err message. So, a couple of questions....#1 do I need to run Carenado's P3D v5 Patch for the SVS at all? Also, Is it better to install SVS with the planes uninstalled…

Anybody have luck getting the PFD and MFD to integrate fully with simPlugins panel builder? When I had a G1000 frame to my panel it doesn’t load the PFD from MFD from the aircraft. Carenado support dismissed my questions quickly and sent me to the forums *sigh* Attached is the result… the PFD is missing the AI sky/ground and MFD is missing the nice splash screen.

There is something I can do to prevent the high speed on ground with throtle idle ? I mean using MSFS2020 Waiting for any ideas. Thank you for your time

I fly for a virtual airline and I wanted to ensure it was ok for me to send the MDL files to our airline painter for him to do repaints for our VA. The repaints are not sold, but are given freely to all pilots within our network.

Hi guys, Looked for the tablet in the V35 and can't see it. I usually find it in the passenger door pocket... Dave

I bought the Cessna 337 when carenado had their sale end of 2022, via Steam. I have not been able to fly it because the right wing keeps dropping into the ground, even when you try to counter it.The controls seem to have no effect. I have tried to delete and re-install but that wont work. Anyone have an idea why this is?

Now that XP12 is out, what is Carenado's plans for it? Thx

Are there any plans to bring the Falcon 50 to MSFS in the future? I think it would be the perfect bizjet for the sim.

I am using the Carenado CT210M_Centurion_II_v1.1. It had been working fine but suddenly the pilots head set is in the way and a serial number request for the Tbient_Manifest_v1.0 (whatever that is) pops up. The other aircraft work fine. I am a pilot, not a hacker. Has anyone else had this situation? This plane is basically unusable which sucks, since my real plane is a P210N and this is the one which most closely matches my real world performance for practicing instrument approaches. Thanks!