Little Navmap | Little Navconnect | Little Logbook Support Forum

Have installed FSX-SP2-XPACK.msi, but Little Navmap still won't connect with P3D4.3. Perhaps I installed into the wrong place...where should FSX-SP2-XPACK.msi be installed to? Thanks for help/advice, Don

I am running v2.0.3 on Win7 and have been using this version since it was released without problems. Today I tried to use it and every time I started LNM it sent my sim computer to BSD showing WIN321K.sys and with error Page Fault in Non-Paged area. Then the computer restarted on it's own. I deleted the entire LNM folder, then replaced it with my last download of the program. When I started the program again I got the same result. When that didn't work I deleted the appdata/roaming/ABarthel/little_navmap_db folder but that did the same thing again when I tried to start the program. I have never had problems with this program before and have been using it for …

Hi Alex I don't know if you are aware of this site: https://openflightmaps.org/live/ It allows you to download VFR maps for most of Europe. It is probably not useful for LNM as they come down as PDF's, but I thought I would point it out to you anyway. John

My simconnect stopped working a while ago and after reinstalling it and P3dv4, I still cannot get it to connect to P3d. Can I use Little Navconnect on the same PC as my P3Dv4 to connect with Little Navmap on the same PC? Trevor

Hi, May I ask you where we get those info of Class airspace, that seems to be accurate and update in Littlenavmap to the latest Airac? I trying to do so for euroscope I need to find an automate way to convert on LAT LON in decimal adapt on circle with LAT LON. This an exemple: Thank's for any suggestion. Zona '5' -AMIATA- 42°46'54''N 012°15'58''E then arc of circle in clockwise direction radius 22.0 NM centred on: 43°06'06''N 012°30'43''E till point 42°48'31''N 012°12'35''E then line joining following points: 43°02'49''N 012°06'35''E 43°03'33''N 012°06'25''E 43°02'14''N 011°53'15''E 42°56'57''N 011°33…

Hi Alex, thought I would create a new topic as I am sure there will be many of us 'high flyers' who mostly use the airways and your comments are always spot on... To kick off the topic back ground, I have cut and pasted your reply to my question about inserting airways into flight plans... Hi Ged, three ways to get this done: Ctr+Shift+N and then enter the route description manually: LOWI MOGT1X MOGTI UP66 KPT UL608 TEDGO EGLL Select departure, destination, SID, STAR and whatever and then use calculate flight plan. This will probably not use exactly your preferred airways but you will get a valid shortest flight plan. Enter LOWI, MOGT1X, …

I tried this great little freeware navmap program available in the Library. It is terrific and is feature rich including the one thing I always wanted was an airfield map with parking positions as read from the scenery database (like an EFB). Highly recommended!

At the bottom of the elevation profile I used to get a reflection of mountainous terrain to reflect safe altitudes. It no longer appears. Is there anything I forgot to do? Thank you., Rolf

I started seeing this on the server and the client. Any ideas why? Thanks, Bob M.

Little NavMap is superb and I would not be without it - just like my Flight1 GTN750 GPS I would not fly without it. The only issue I have which I have wondered if there is a way to solve this is - - - Is there a way to load an AIRAC 1611 database into Little NavMap so that when I plan a route and export it in the GTN format for importing, my GTN often is not happy with many of the way points because it's database is an older 1611? I realize the Little NavMap AIRAC is more up to date but in a way that does not help my syncing and flow through to my GTN. Regards, Dane

This is curious, but even though I show the .fpr files where they should be - C:\Program Files\Lockheed Martin\Prepar3D v4\SimObjects\Airplanes\mjc8q400\nav\routes - when going into the Flight planner P3D v4.3 and trying to load the flight plan into the Majestic Q400, the plans cannot be found. In the directory they show up. I have been away from the computer for 3 months and I am wondering if any procedure has changed. Using the .PLN flight plans for other Planes works fine. I look forward to receiving your comments. Regards, Rolf

Hello Folks, Love this progran cannot run without it. Have a little problem, had to do a complete overhaul of my computers. Needed to re vamp my system. Im running a network and i need to know do i load the lil nav on my client? !. after it load i set the address for the server. Then i believe i run the scenic library. when i try i get and error i need to locate main flightsim folder. The only option is for X-plane and no option for FSX. I have simconnect all set up. I dont see where in your manual explaining how to set it up in a network. im running FSX not X plane. How and where do i get this done. THX....RobertC

When I am looking at ai's at a airport... zoomed as close as I can...sometimes and maybe nothing you can do but sometimes the tags showing ai identity are over one plane for 2 spots..Two different aircraft sitting next to each other. Is there something I can do in settings or no? https://imgur.com/0OYy0Hr Thanks for such a great program, Bob M.

I have the path to the Active Sky weather file set as below and when I look at it, it is current. Yet, in the program the date is always 7/25/2018. Is there a way that I can fix this? Thanks! C:\Users\Rick\AppData\Roaming\Hifi\AS_P3Dv4\Weather\current_wx_snapshot.txt

Dear sir, Recently I installed the Bonaire scenery from Aerosoft in my P3Dv4. There are two layers in the scenery.cfg (Bonaire_Alfa and Bonaire_Bravo). The layers are installed in the correct sequence. I did a "Load Scenery Library" without any problem. When I click on the map of TNCB I see a big grey rectangle on the location of the airport (I assume it is the afcad file AFX_TNCB.bgl). See above. What went wrong? Can anyone help me with this? Kind regards, Alje Bakker

SOLVED. Little Navmap is connected to P3Dv4.3, but I can't see my ai aircrafts any more. I get the following message: "AI and multiplayer aircraft are not shown on map. No AI or multiplayer aircraft selected. Found 64 AI or multiplayer aircraft". And if I disconnect and reconnect it to P3D, it says: "Connected, waiting for update" It can't be for a new version since I already have the latest v2.03 What's wrong? Regards Jlund Sorry, I tried to reset display settings, and that did the trick, so please ignore this thread.

I was hoping to use Little Nav Map to obtain LAT/LON coordinates for user waypoints that Pro-ATC X sometimes creates for departures and approaches (then I can enter the waypoint into the FMS). The generated flight plans import perfectly into Little Nav Map, but unlike the standard waypoints in the Navigraph database, the "Show Information" option is grayed out. I currently use Plan-G for this purpose, but Litte Nav Map is so much better, yet it's missing this feature. Is there a setting that needs to be changed in Litte Nav Map to obtain these coordinates? Can this feature be added? Thank you! Neal

Would you consider adding support for Aerowinx PSX to Little Navmap? It should be not too complicated to implement, as PSX is able to send every variable needed (lat, long, alt, trk etc.) unencrypted over the network. I would be happy to beta-test and provide additional info if needed.

Hi I have installed Orbx EDBJ. I have updated thr scenery library in LNM. As far as i can see LNM dont recognize the EDBJ airport scenery I have installed. Of couse the airport are in the map as it is in the default P3D4.3 database but not as Orbx scenery.If I look in information dock window/airport/scenery there is only Base Apx 51130.bgl and also FS Aerodata files. On the map the airport is not shown as an add-on airport. /Thomas ESNN

Hello, I've made several Userpoints on airports. I really would like to have an Internet link inserted in the userpoint description field to add e.g. additional airport information or a link to the airports charts. But it's only possible to insert plain text into the description field. Could you please make it possible to insert a clickable link there? Thank you!

Little NavMap version: 2.0.3 I am not sure why this happened but I have a saved flight plan with User Waypoints that I have used many times and it was always depicted correctly in Little NavMap but now the User Waypoints are gone. Fortunately I was able to go into my saved flight plans in EFB2, retrieved the plan and saved it to my P3D Files folder, then brought it into Little NavMap. So - besides wondering how this could happen, what is more an important question for me is - Does Little NavMap retain User Waypoints and if so how can they be viewed or accessed? It would be nice if there was a menu item for User Waypoints (maybe there is and I am missing it)

If I want to just see the map only without having to cover up littlemap interface....can i minimize it and have just the map for flying or just watching ai's? Thanks, hope i made sense, Bob M.

Hi Alex, I'm thinking of upgrading my Mac OS to El Capitan - I'm currently on Mavericks - will Little Navmap run on El Capitan? Thanks, Jim

Little NavMap ver. 2.0.3 GTN Trainer ver 6.21 GTN Complete ver 2.06 I am confused why my saved LNM flight plans exported to Garmin GTN GFP are not showing up in my GTN Catalog\Import menu. I do not know if this is a GTN issue or a LNM issue - looking for help. The LNM manual (Page 90) says that if you are using the GTN Trainer ver 6.21 then the flight plans are stored in C:\ProgramData\Garmin\GTN Trainer Data\GTN\FPL The manual also says that the saved flight plans for the GTN GFP files for Prepar3D v4 are in C:\Program Files\Lockheed Martin\Prepar3D v4\F1TGTN\FPL I have given a link to my printscreen of side by side comparisons. The o…

Hello Alex, since I only use the Navigraph files, no RMZ or TMZ airspaces are displayed anymore, as Navdata they do not provide it either... What option, besides to look into the real ICAO maps, is there for us VFIler, which we see the TMZ / RMZ in Little Navmap? Best regards or moin moin Michael Friese96