The MILVIZ Support Forum
Military Visualization's unofficial support and update forum where owners of the MILVIZ products can get support and feedback from their fellow MILVIZ product owners. Official support can be obtained at MILVIZ. Website: http://www.milviz.com//
729 topics in this forum
-
Is anyone hearing a clicking sound about every 3-4 seconds while in flight. Gets pretty annoying. Milviz said they were aware of it before the SP. Still have it after downloading the newest version with the SP.
-
- 13 replies
- 1.9k views
-
-
I just started flying copters in P3D, and my experience is several years of RC Copters doing aerobatics, and a couple of hours in an R22 so I am pretty familiar with basic copter theory and handling.. The first copter I got was the Milviz 407 followed by the 530F. I had read that it was possible to configure pitch trim in these copters, using the normal control trim assignments in either P3D or FSUIPC for elevator trim, so thyat I wouldn't have to hold a constant forward cyclic pressure when cruising. Since I fly fixed wing and have many payware aircraft like A2A and PMDG, and Q400, types, I normally use FSUIPC to program in my control axis and switch settings so that …
-
- 7 replies
- 2k views
-
-
I grabbed the 407 a few days ago via sale.. Flew it around even though I didn't know what I was doing, but I could start and fly.. Next night after watching video's start it up do better job flying, but it was having engine problems. Tonight.. can't get it to start at all.. winds up, winds down.. followed the checklist no good.. Restarted FSX.. went to a different side of the country.. still no good. Watching a video last night I saw a guy push "switch pedal stop" during the startup (even though I don't see that in the manual).. tried that and that didn't work either. Did reset failures, still no good. Kind of frustrating, get out of work, excited to check out my…
-
- 19 replies
- 9.1k views
-
-
Great aircraft, but I am having a problem. I am flying in P3DV3, and when I go to the menu for VEHICLE/FUEL AND PAYLOAD only Station 1 passenger is indicated. Am not able to add passengers in the other three seats. Checked the Aircraft CFG file, thinking I would add the three additional station weights manually, and see the following: [weight_and_balance] max_gross_weight = 5700.000 empty_weight = 4050.000 reference_datum_position = 0.000, 0.000, 0.000 empty_weight_CG_position = -0.100, 0.000, 0.000 empty_weight_pitch_MOI = 5386.000 empty_weight_roll_MOI = 2880.000 empty_weight_yaw_MOI = 7318.000 empty_weight_coupled_MOI = 0.000 max_number_of_stations =…
-
- 2 replies
- 830 views
-
-
-
Hi, I cannot work out how to use the TACAN to set up for an ILS. Can anyone post a step by step guide to setting up the F100 for a full ILS approach? I would be very grateful, as I'm pulling my hair out trying to fly one! kfd
-
- 9 replies
- 2.7k views
-
-
Hello all! Purchased the 737-200c on the weekend. Very fun plane. Have a few questions however and I can't seem to register on the Milviz forums. - How do you open the doors? Shift E opens the passenger door, but I can't seem to figure out the cargo doors. - Is the yaw dampener light working? It says turn it on in the check list. It is already on when starting but the light is out. When you flick it to off position, then the light comes on. Thanks!
-
- 3 replies
- 2.1k views
-
-
Just want to make sure I am up-to-date. I purchased the aircraft in 2013 from FSPilotShop. If I download the installer again from FSPilotShop, will it be the latest version? Thanks much.
-
- 1 reply
- 839 views
-
-
The MilViz WX radar is on sale right now and I'm very interested in getting it. But the description is a bit vague about the panel configuration options. Can anyone tell me if the configurator allows you to place/size the radar into a particular panel (VC) or does it just place the gauge on the screen as a window? If it does place the display into the actual panel, is it a WYSIWYG interface or a bit more complex??? I would appeciate any advice from those who have purchased and use this product Ian
-
- 3 replies
- 1k views
-
-
Hi Folks, Noticed a couple issues since I just upgraded to the new installer because I wanted to take advantage of your relatively new weather radar... The port Nav Light is shifted way off the port wing... The tail Beacon does the same - just forgot to turn it on for the shot... The dual GTN650 plus Weather Radar - the click spots on the GTN bezel to open the popups are reversed - click on bottom bezel - the top GTN popup opens - vice versa... Appreciate any help - as this is my FAVORITE light twin... UPDATE: I just tried the GTN750 plus the GTN650 plus the Weather Radar - - - the Nav Light looks good on this model however the tail Beac…
-
- 5 replies
- 1.4k views
-
-
Hi Folks, I had an account on the official MilViz forum but it seems to be gone - I tried the "forgot my password" routine but it doesn't recognize my email which hasn't changed in 20 years... No biggie... Any-who - I just noticed a thread on the MilViz forum questioning whether or not to cancel the Lear 60... I was just hoping someone might offer a little more information and/or insights for the reasoning ??? The teaser shots look absolutely fantastic and it's one of the two planes in the MilViz future projects catalog I'm truly looking forward to - the King Air being the other... Anyway - just wanted to express my opinion and support for the Lear- take it for wh…
-
- 2 replies
- 1k views
-
-
I just got the Cessna 310R because I don't have a twin prop of great quality, and I found that everything about this plane was much better than I thought! But when it came down to installing the GPS I was having a lot of trouble with that. I installed the addon with my Antivirus disabled and I still have this issue. I tried to select the GPS with the MVAMS menu but that did not really work either, it is either a blank area where the GPS should be or the orange-lettered BendixKing panels.
-
- 1 reply
- 1.1k views
-
-
Instead of hearing it as you raise the collective you are already 50' in the air before it kicks in then it goes in and out completely, ruining the effect. I cannot imagine doing a video with sound.
-
- 14 replies
- 1.9k views
-
-
I can't find any infer for this so I'd like to ask here. Why do I not get cockpit lights with the switch on at dawn and dusk. Thanks
-
- 1 reply
- 1k views
-
-
Hi, I just bought this last night. Great helicopter! But in the manual it says there's a manual called BHT-407-FM-1 but I can't find it on my PC. So I did a search here and found a post going back to 2014 and in it MV stated that they would be releasing a revised version. Have MV released one? If so where can I find it? Thanks.
-
- 4 replies
- 1.6k views
-
-
Hello, In the Milviz menu manager of F-4E, when I select "ready to fly", in fsx I am always in cold and dark. Back in the menu manager, the "ready to fly" option is no longer selected. I forget to do something? Cordially.
-
- 13 replies
- 1.8k views
-
-
I just bought the T-38 Advanced for P3D 3.2. - Windows 7/64 high-end PC It's an excellent plane but I have a question. Does anyone else with this plane notice that there's practically no engine sound with the engines running from inside the cockpit? I have plenty of engine sound in external view. P3D sound setting for engines and cockpit are sliders full right. In the video on their website you can hear the whine of the engines quite nicely but mine is barely detectable. It's like when I fly from inside the cockpit someone hit the Q key. Anyone else see this? I have tried different Soundblaster settings all to no avail. Thanks.
-
- 1 reply
- 1.4k views
-
-
Just downloaded the newly updated version of the Cessna 310R, using the free panel variant. I tried 3 flights, all ended with an out of memory crash after about 20 minutes, looking at the FSUIPC log file, VAS was critically low...Never have similar problems with other GA aircrafts, usually I have minimum 1 GB VAS left. Seems to be an incompatibility with P3D 3.4? regards, Thomas
-
- 1 reply
- 996 views
-
-
Curiosity forces me ask - your competitor "C......." produced a 350i model with, from all reports, working PL21 avionics. This outfit is not notorious for accomplishment in this area so how much better will yours be than theirs? FWIW I am a pre-buyer in waiting.
-
- 5 replies
- 1.8k views
-
-
Getting the error MV_WXM.dll incompatible with this simulator after updating the client .msi in P3Dv3.4
-
- 5 replies
- 2.3k views
-
-
Purchased the F-4 j yesterday. The PDFs user guide seems to require a password to open it. I can read it if I open it from an active download from Milviz, but again, not if I save it. No problem with the NATOPS document. How can I resolve this? Thanks!
-
- 9 replies
- 1.7k views
-
-
-
- 1 reply
- 1.7k views
-
-
-
- 6 replies
- 3.2k views
-
-
-
- 2 replies
- 2.1k views
-
-
Does MILVIZ have any plans in the future for more civilian airliner or commercial aircraft? I really enjoy your B732Combi it hand flies so nice, I'd love to see you guys do some more steam driven regional jets or commercial airlines from that era. Maybe a dual civ/military transport aircraft would fit your company profile well C-123 Provider C-141 Starlifter? (I guess a C-141 is strictly military) Prop or jet doesn't matter would buy without hesitation. Thanks for your excellent support and great products.
-
- 2 replies
- 1.1k views
-