The MILVIZ Support Forum

Hi Milviz I loaded up the subject release and I must say the new panel looks very nice. I just took off on a short flight and noticed there are some significant changes to the AP, or maybe I messed up the install. It seems that ARM and VS are now inop and I had a bit of trouble trying to set a climb rate. Could you please say a few words on the changes? Thank you Rick

Hi! I installed new version (MilViz C310R Unified Installer v1.160224) and I saw a problem with landing lights. The lights light up the sky like a spotlight. How can I solve this issue? I use P3D v3.2, W10 64bits. Thanks,

Milviz continues to improve older products and passes it on to purchasers. They deserve a shout for being such a great developer. Bill W

I received an email from Simmarket today saying this version of the Baron was released by Milviz... MilViz-BeechB55v2.160322.zip . It seems I have what looks like a later version MV_B55_FSX_V3.150525.zip The zip file for the first is quite a bit larger than the second. Any ideas what this means?

Hi, Does anyone knows what the status of the KA350i is? I bought it more then a year ago in the pre-sales, and since then not much happened. All I know is that Milviz released several other new aircrafts. It looks like the KA350i doesn't have their attention anymore, despite what Milviz is saying. Yes... I do know that I bought a not finished product that needed to be finished, but come on..... it's now more then a year ago. I'm not amused to say the least.

Just purchased MilViz Baron 55 (MilViz Beechcraft Baron 55 v3.150525) and Milviz GTN (MilViz_B55_F1GTN_v1.150308) Installer, The installation of the Baron 55 went fine, however, in the installer screen for the FIGTN v 1.150308 there is no selection for the GTN 650 or 750 only the GNS530/430 OR GNS430x2. Both were downloaded from their website today (March 13, 2016) - so should be the newest. I have installed the f1 GTN 650/750 on numerous other aircraft including Bert's great modifications for older aircraft- and all function 100%. I use Windows 7 and FSX (SP2). I've checked the web but, have not come across anything similar. Any suggestions? …

Good morning everyone, P3D V3.1 on here and have installed the latest Milviz F-4E 160114.exe. Apart from everything else that runs fine, I see no pilots? I know to activate those by "Shift+1" key combination, but by doing so the dialog opens not showing any content (blank field, no content). As so I cannot change anything in there. Question: Can such be set (assuming this would now be set "0" for this to change to "1" or so) in a specific .ini (or .cfg) file? If so, which one? Would be great receiving some feedback on this ans such shall be appreciated. Regards, GIBF4 The Netherlands, Europe

I found myself recently totally reinstalling the Baron B55/E55 after totally screwing up my panel.cfg files and an RXPGNS.INI file. I removed the models and reinstalled using the v3 installer that I believe was provided last summer. Then immediately after my reinstallation I have twice experienced the fabled FSX carb icing. I was flying the E55 variant in both instances. I've logged over 200 hours in the models, primarily in the E55, and do not recall this happening before. So I figure I did something. Read on. Also, I noted that when I pressed the H key that it toggled the Baron's Prop Anti Ice switch. I believe that shift-H did the same. First question is this: does …

Hi, I noticed that the Milviz forums were not accessible for a few days, and since coming back online yesterday, I have noticed a few strange occurrences. First thing I noticed was that a few of my recent posts have disappeared, and they are still not there. Secondly, even though I am logged in I don't seem to be able to reply to a topic or start a new topic. There are no options to do so. Down the bottom right of the page there are some notes that say: You can post new topics in this forum You can reply to topics in this forum etc, etc However, I can not find an option to reply or to start a new topic. Cheers,

Hello Was hoping someone might know a way to assign the throttle engine cutoff function to a joystick button. The F-100 requires clicking on the throttle to move it to the shutoff or start position. I would like to assign this to my joystick (hotas warthog) which has a similar detent on the throttle. But I can't find the command that will achieve this. I use FSUIPC for my joystick assignments. I tried the macro file that came with the F100, but there is no command in there for this function. I tried making a mouse macro with FSUIPC, but it is not recognized (probably an XML designed panel). Anybody know a way to achieve this? Thanks.

Hi! Milviz, I am very anxious!!! I would like to know some news about Milviz B55, C310 and B737 installers for P3D v3. Please give us some any good news I can't waiting more... Best regards,

Anyone got the drag chute working in the F-100?

Well I really really hate lending any credence to internet rumors so I apologize for this question in advance. But...there's a rumor floating around a VA forum stating that the 737-200 has been canceled. No other info to back up that statement but I thought I'd drop by here and get the official word. Any truth to the rumor? -Bob

As the title says, the Hun has arrived! http://milviz.com/flight/products/F100D/index.php

just getting back into flying the tubes after a long hiatis... Using Version 2.140621 ( upgraded version for p3d ) of the Milviz 732 installed in P3D V2.5 Issue #1...The Milviz P3D menu manager won't plug any entries into the sim aircraft...i.e. fuel and payload entries made within the menu. Issue # 2 Always Full Tanks ...Using the Fuel and Payload drop down menu in P3D has no effect and all three tanks in the aircraft always reset to FULL. I've tried re installing...using different variants...loading fuel during different phases of start up ...etc... I did a web search and found nothing....isolated issue ?? Any help appreciated thanks Gre…

For those of you who love Tacpack... The MV F-86F-30 Tacpack version is going out the door in just about an hour! MV Direct ONLY! There will be a discount for those who bought it direct from us. (discount is for two weeks ONLY) For those who didn't, please be patient as we will be sending it out (with a two week rebate) to all vendors. Thanks for your loyalty... It's appreciated!

Folks, We are presently looking for new beta testers. The criteria to become a tester is as follows: 1) be able to test new products in a variety of sims such as FSXA, FSX Se, P3D 3.1 and, potentially, others. 2) Be familiar with many different systems such as FMS, avionics, HUD's and weapons. 3) having real aircraft experience is a bonus not a must 4) you must be able to prove that you are at least 25 years of age. 5) be analytical and thorough Sadly, you do not get to choose which product you work on. You'd be expected to work on them all. In other words, don't apply just because you want to test out (and get a free copy) of the Kingair. That won't happen. In excha…

Hi, First of all, we want to thank all of our King Air customers for their loyalty and patience. It hasn't been a quick road to a release, and unfortunately, it's about to get a bit longer. When we started the King Air, our goal was to make one of the most authentic simulations of the King Air that would exist in our simulators. We were confident in our progress, to the point that last year we decided to open up the doors and invite our customers along for the journey. Well, although the King Air has progressed to the point where many might call for it's release, saying it's 'good enough', we've had to sit down and make some very difficult decisions regarding its evolut…

Hi Folks, I recently picked up both F1 GTN Avionics packs for the B55 and C310... The C310 install went as expected - but - I think - I was sent the wrong installer for the B55... Even though as you can see from the attached screenshot - the installer is labeled FI GTN - the only GPS choices available are for the GNS series... Again - this is only for the B55... Is it me or is there something wrong ??? Thanks... Regards, ​Scott

Hi Folks, RE: Win10 and P3Dv3.1 Been trying to use my newly installed GTN units and I'm having some difficulty... Perfect weather for testing some instrument approaches into KMSV today... Just a quick side note on the autopilots - I realize they are simplified versions although I was a bit surprised considering the obvious care and attention to detail spent on the rest of the plane... Honestly - they seem like the weakest link in these otherwise superb packages... So - I installed the GTN's as per the directions provided - they appear in the panel fine and seem to function as advertised... I started off with an RNAV/LPV approach at KMSV 15 using the B55 - …

Just started flying the MilViz 7373-200ADV. Is there such a thing as a Tutorial Flight? I have more or less less managed to get the hang of this aircraft( I have flown the PMDG 737s.and 777s, and the AS Airbuses), but cannot get the FMC to follow the VNAV or set the VNAV in the FMC. When I try to set a crossing altitude, say 7000 and try to set the TGT V/S, if I select 1500 I get ALT TOO HIGH and the FMC locks out. In other words I cannot try to correct it. It stays stuck at ALT TOO HIGH. I have installed the latest V-ONE Gauge v.2.0. I'm flummoxed. I can get the aircraft to cruise level, follow the LNAV plan, but cannot get it to descend as per the FMC. A…

Hi Folks, This is all really GTN related... I'm enjoying my new dual GTN650 installs in the C310... Question - as I'm not familiar with the GTN series - does it support crossfilling and if so how do you do it ? I can't seem to find a procedure posted anywhere and it doesn't seem to be an obvious feature in the menu... Just another side note - I guess the F1 GTN doesn't support any of the weather features ??? Thanks... Regards, Scott

Hi Folks, Proud new owner of the MilViz B55 and C310 - my introduction to MilViz - looking at the F1 GTN Avionics addons... (now I'm really looking forward to the King Air as I'm pretty impressed with what I've seen) If I only own a GTN650 - which plane can I install it in ??? Someone mentioned that only one of the two planes will support just that unit... I can't seem to find any pictures or a better description about the Avionics Packs... I've also surfed the MilViz forum on their site and it seems there were some bugs initially reported with the Avionics packs - have they all been resolved ??? If someone has a good screenshot of the F1 integrations - i…

Hi all, MV is having a one day, 50% off sale starting today at midnight. All products except the F-4S/J and the T-38A ADV are 50% off! Thanks for your attention! www.milviz.com

Hi, I've heard really good things about the 310 and want to buy it. However, I have a home cockpit build and I'm concerned that the startup procedure will not work with my set up. Specifically, I am concerned about the requirement to hold in the start button and simultaneously press the primer. I have FSX engine starters mapped to a button, but its an FSX command, so its on or off. And even using FSCUIP, there is no primer command. Can anybody tell me if they've mapped the start procedure to keystrokes at all? Thanks!