The MILVIZ Support Forum

I just got caught on and about to get this bird today, according to the bargain forum and Milviz forum the intro price is supposed to end on June 10. It's June 9th today. So which is it?

Just want to confirm the new Beaver is compatible with earlier releases of the P3Dv3.4, like the hotfix #2, i.e. P3Dv3.4.18, which is the one I have installed (the latest hotfix #3 is not installed since I don't use SLI). Thanks in advance for the clarification. Cheers, Ed

I've posted this on the Milviz Forums as well, I just hoped maybe someone here has an idea what might be going on. Basically, I can't take off. I start up, everything on and seemingly ok. I push throttles forward and hear the afterburners kick in. I build speed and reach v1 and V2-have moved to rotate and the nose pulls up around 10, 15%. But that is it, I don't rise from the runway but continue on the back wheels. It maybe that the front has not fully lost touch with the runway either but I can't really tell. Anyway, I shoot off the end of the runway. Depending on where I am I keep moving at speed and then , eventually, the nose flips up, a/c gains height quickly, …

This is a problem I probably created myself, but I don't know how to correct it. I ran the Beaver with TrackIR, and now whenever I run it without TrackIR, the VC is tilted right (as if my head is tilted left). In FSX, the viewpoint can be adjusted forward/back, left/right and up/down. But I need to adjust it in the roll axis. How can I straighten out the VC view? jschall Posts: 2 Joined: Tue May 30, 2017 4:18 pm

I just reinstalled the C310R from when I got it from Flight 1 and I can't get the EDM700 to go into lean find as the buttons are not working I've read the manual on it and tried clicking it but nothing happens am I missing a update for it? I figured it out it's on the main 2D popup panel I was trying to do it in the VC I could see me putting a lot of hours on this amazing aircraft

Hi All, Got the new Milviz Beaver over the weekend and I've enjoyed flying it for the most part. I've got a problem though --- can't seem to be able to get the instrument or map lights to operate no matter what I do. I'm running P3d v3.4 and Win 10 on a pretty good set up. I followed all the instructions from Milviz about disabling AV and UAC and running as administrator etc....still no luck. I have also RTM and followed the directions there to tick "pilot controls lighting" under the P3D realism settings.....and I turned on the instr light switch and moved the rheostats.....no effect. I've even done a reinstall and still no joy. The landing…

Ken Stallings, the owner of the actual C310R used as the basis for this FSX version, created some truly epic and awesome "Tutorial Missions" that will help even experienced real world pilot's to get accustomed to some of the peculiarities of the Cessna 310R that are faithfully replicated. Complete instructions for installing the required components, which include Portales Airport where Ken's aircraft is kept are included. Please read carefully and follow the clear instructions! Here then is a link to the http://milviz.com/Online_products/Extras/C-310R_Missions.zip Complete Set (warning: 315MB zip file!): C-310R_Missions.zip C-310R_Missions_Airba…

Greetings, After numerous , never-ending frustrations with newer twins from well known competitors, I have returned to the Milviz C310R. The quality, stability and character of this find twin is a breath of fresh air after more than five years since release. That said, I have a few questions: 1.) Can you advise which actual aircraft with registration the Milviz C310R is modeled after? 2.) Is the Milviz KAP 140 AP designed to specifically for the Milviz G30? The reason I ask is I'm trying tpo perform a panel.cfg merge of sorts using the Milviz KAP140 and other avionics with the RXP 530. I notice if one follows the RXP 530 integration instructions, the avionics …

Hello! I uninstalled 170526 before installed version 170528 and I found that all floats and ski aircraft was missing in Aircraft menu. Any solutions? FSX SE

My browser reports that it cannot find the milviz.com website today. Can anyone confirm this or is the fault at my end?

Regarding this helo, I was wondering if anyone has come across, or has access to, the specific texture (1) for N204BH whereby that registration is actually shown on the bodywork ? For something which I'd assume would be a straightforward thing to add, repainting for me is akin to line sketching with a house brick, falling into the realms of the black arts. It goes without saying that the military variants available look superb - just thought it'd be great to have this civilian registered one too (and even better if it looked similar to the UH-1H N2220F version.....). Appreciate any feedback - thank-you.

I wonder if anyone has produced a repaint of the Milviz Baron which is based on the B55's flown in the 1970's at the College of Air Training, Hamble? I believe they had two bladed props, dual controls and King radios; including VOR/ILS, VOR and a manually tuned ADF receiver. It would be rather nice to see Milviz (or someone) produce a repaint of this B55 Baron i.e. without a GPS, so that we could all perhaps go back in time and try flying this lovely twin on basic navigation instruments. Bertie Goddard

Hi all, Would someone please share his TM Warthdog Hotas mapping for F-4E,mainly the Radar Cursor Azimuth and Radar Cursor Range,since I have to assign to axis and I tried the TM Coolie sw but It did´t work. I thank you in advance, Rgds,

The amazingly good-hearted folks at Milviz have now made their very awesome Stuka freeware! I want to get the word out and tell Miviz that I sure appreciate them making more of their great planes freeware for us! Big thumbs up to the devs and team!

All in the title...Great news ! Regards, Richard Portier

Hi, I sent Milviz a message requesting registration so I could access their forums................I have not yet heard a response from them. I recently downloaded the F-86 Saber Jet for P3D they sent me a link for (I had purchased the FSX version previously) and unfortunately the F-86 crashes P3D V2.5 when I load the A/C into the sim. William Clark

I just purchased the F-4 yesterday and have spent hours trying to figure out why I have no interior cockpit lighting. I've tried all the interior lighting knobs both front and back and nothing works. I'm using the latest F-4 SP1 version, P3D w/HF4, NVidia 353.62 drivers. Still waiting on access to the Milviz forum so thought I would post here. Can someone help me troubleshoot this?

Hi. Every time I try to load the 737-200 into P3Dv3.1 (either as a new scenario or changing aircraft in an existing scenario) it crashes the sim to the desktop. I did get the 737 to load one time, but it was not functioning correctly. I then loaded the SimConnect files from P3D. I did get one 737 to load once after installing the SimConnect files, but after that it crashes every time. I'm on Windows 7. All other aircraft (default and 3rd-party) seem to be OK. Please advise what is causing this and what I can do. Thanks, Jeff

Does Milviz Phantom F-4E work with P3Dv3.4?? Downloaded latest F-4E file, seemed to install ok, [using P3Dv3 option], aircraft opens ok in P3D then within 10 seconds or so have P3D AppCrash with Fault Module ID as: MV_F-4E_Sys.dll. Anyone struck this or any thoughts on how to fix?? Thanks

My heuy heli from milviz is in total loss after the creators update from windows 10 Have anyone this too?

As above very nice of them

Just reinstalled the C310 on P3D 3.4, version from 08/2016. Everything works great, but the font size of the autopilot display seems too large...the letters "HDG" (when heading mode is selected) are so big, they even mask the "AP" light. Same for the DME gauge - digits are too large. Do I have to change something in the windows settings...? Thomas

Hello, I'm getting an error message when I load an aircraft with the WX Advantage Radar. It says " MV_WX.dll incompatable with this simulator" I'm using P3D v3.4.22.19868 on Windows 10 64 BIT and the Flysimware Learjet 35A. I have right clicked on the MV_WX.dll in my P3D gauges folder and checked the Details tab->File description. It says for P3D v3.2.3.16769 How do i obtain a copy for 3.4.22.19868 or otherwise fix this problem please? Thanks in anticipation Andrew

Hi In my heuy uh-1 I cab move ùy trottle grip with my mouse. Is there a key possible to increase and decrease the trottle grip? Becaouse I need my right hand to move my joystick an so I can use the trottle grip by keys. jefken

There is a new support pack out for the Cessna T50. According to Milviz this update addresses the following issues: 1. Fixes FSX Material problem with rear seat and frame when using DX10 Preview or P3D 2. Fixes FSX Material problem with rudder and horizontal stabilizer/elevators/trims 3. Adds parking brake control to lower left instrument panel 4. Fixes right engine cowl missing object 5. Modifies texture lighting for rear seatbelt metal hardware (won't glow in the dark).