The Multi-Crew Experience (MCE) Support Forum

Hello, since a few days I have MCE for the FBW A320, but are still struggling to get things to work. 1 After installing MCE part of my hardware FCU functions no longer work. This is due to the "fsuipc-lvar-module" MCE uses. There are 000 Lvars and 000 Hvars loaded. After replacing the module with the one installed with Fsuipc7, the Lvars and Hvars were loaded again and all functions were OK. (I tested many functions through the "activate Hvar... and they all work fine) But now MCE does not load its Lvars and Hvars and many things do not function, or in a weird manner. This is part of the Simco64_Ldr.log: Logging started Simco64_Ldr loading Created Simconnect se…

Hello. Is Toliss A320 planned for integration? Regards, João Galaio

How do I know about updates, how do I get them? I have FS LIMITED - MULTI CREW EXPERIENCE MSFS EDITION only one that shows to update from SimMarket is 3027 I read there is 3028 available? Now also some news about improvements to PMDG support? Thanks

I have version 2.9.60. I'm interfacing with PF3 with an IFR flight. I want to setup MCE so that I always set the comm freq and speak with ATC. I uncheck C-Pilot can handle radio if busy, but the First officer always answers ATC. If I tell the first officer I have the comms, he will respond that I have the comms. But even then, sometimes he'll continue to answer until I repeat I have the comms. Not sure what I'm doing wrong, but would like to setup MCE so that I always have the comms. I would prefer not to default to telling the first officer I have the comms.... How do I do this?

We have released a new product dedicated to PMDG 737 in MSFS that provides a full crew (Co-pilot, mechanic, flight attendants and ramp agents) to assist you flying this lovely bird. It has full integration with the PMDG SDK as well as Native ATC and Simbrief. It's not a scripted adventure. Ask your co-pilot to perform what you want, when you want and even using the verbiage you would speak naturally. No particular protocol to follow. This is voice control that is fun to use. You do the task sharing as you see fit. It's also the first of our products to provide both Voice Control & Button Control. It has a much lower price point compared t…

Hello, I got MCE about 2 days ago however since then I've been having a few issues with it and haven't been able to find any solutions on here or any other platform. Issue #1: Everytime I tell the co-pilot to begin a checklist (using voice and it is a custom checklist), the co-pilot responds with "Checklist reading is cancelled". Sometimes it'll say the first item on the checklist and then say the same thing right after and cancel the checklist, I do have my co-pilot's voice as TTS. Issue #2: Joystick hard mute button I was trying to assign the numlock button assignment to a button on my Thrustmaster TCA Yoke however it wouldn't work, as a matter of fact it wou…

For some unknown reason MCXP stopped working some time ago. I downloaded the latest version 3.0.2.1, and I still have the same problem. After loading the aircraft on the tarmac (Fenix 320) I start MCE. Everything appears to load fine until a window appears instructing me to reload the aircraft. If I dismiss the pop up, MCE shut down. If I leave the popup screen, then I can communicate with the copilot and MCE. works OK. So what's wrong with this pop-up window? How can I get ride of it without taking the risk of a shutdown of MCE? I have been using MCE since 2018 and never had this issue before. Any help will be appreciated. Charles

Dear Community, I bought MCE for Xplane 12 and got my registration.txt and the .lic file after registering and activating the product and put it in the specified folder. After activating I could use the product without issues. I just started it once to play around and then closed it again. When I now start X-Plane 12 the plugin is grayed out - and if I start it manually by clicking on the dekstop icon, it is unable to find a running X-Plane installation. I had this prior to activating it but everything worked after I got my registration.txt and license file. Could it be that there is a problem with the registration - has it been reset? Also I now get a popup tha…

Hello, Foremost congratulations and thanks to the MCE team for such a fantastic, customizable, and feature rich program. I've tried the demo and eager to purchase the full version. I will be using it exclusively tor the PMDG 737 in MSFS and have a few questions: 1. Do I need to purchase the MCE MSFS *and* "Multi Crew PMDG 737 MSFS"? If so, is the PMDG package what allows me to access the custom data refs/command I couldn't find in the demo? 2. In regards to voices, are we able to make our own recordings? If so, how? I notice the voice packs are in a dll format so curious to know if there is a tool to record our own sound sets/responses. …

hello whats the voxscript command for 'FO TERRAIN RADAR OFF' for the fenix a320 and pmdg 737 , i managed to make him switch it on but cant find a turn off command thanks

Just want to say that I am having a blast and really enjoying the program, few minor things that bug me and would like some help maybe in learning. 1. So, I was doing a manual departure and the co-pilot kept on nagging about my altitude speed and this and that, which he really was totally out of way, because he really has no idea what I am doing, meaning he is not aware of SID that I am following so why the remarks about keeping it on heading and so on, is there a way to shut him up LOL. However I still want him to monitor things like crossing 10K, 1000 to go, reaching transition altitude these are all helpful and nice so I do not want to turn off monitoring si…

I have a problem with MCE and PF3. Although the setting "Co-pilot can handle radio if busy" is selected and I previously gave the instruction "Your Radio", the FO does not confirm the instructions from the ATC. This happens e.g. B. after giving the instruction "Request ATC Clearance" or "Request Taxi". This has always worked flawlessly in previous versions. The current FSUIPC version 7.3.17 and MCE version 3.0.2.7 are installed. PF3 ist Version 3.19.21.

Hi I just got a demo on my new install and it is looking pretty good with PMDG and MSFS, but i have couple of questions. 1. can I use MCE for keypress (sort of like using voice attack) reason for that is that I want to move all together to MCE as it worked very nice in my first flight with 737 instruments radios etc., but there are few commands I use that require key press as I play in VR (I cannot see keyboard), these are view changes (mostly). I have custom views set to to numpad keys 0-9 so I would like to say "view 7" and then have MCE press "Numpad 7", I can run voice attack alongside of MCE but VA seems to have problems pressing numpad keys, unless I mute MCE, …

Hello, I use MCE for MSFS with the Fenix A320 being quite happy with the tool. However, it sometimes understands a command to switch off IRS one, two and three. I guess this is probably because of some noices in the background in the room. The issue with that is that it severely interrupts my activities when before starting the aircraft and it has an even nastier impact when this happens in flight. I would therefore delete these three commands from the tool to avoid the issues I have with it. Does someone know how to delete such commands from the tool, which steps to take for that? Any help is highly appreciated:) Kind regards, Tilo

Is there a way to get the MCE Config file to support the Reverb G2 VR Headset? I have tried the "Assign Sound Device" but the window never opens. Thanks, John

Been using MCE now for 7 years with no problem in FSX then P3D then the other week I switched over to MSFS and after a MCE reinstall it worked perfect except for one thing PF3 or native ATC is not working. Getting transmitting sound on my PTT switch but no one seems to be listening. ATC from tool bar works. Any ideas please.

I am getting this message ever and ever again. MCE will be closed after that. I restart the flight and the message pops up again: "In order to allow co-pilot to control all switches accurately, please restart the flight (not the simulator, then restart MCE."

Hello my friend, As the title says. Directly Purchased - How to update? Originally, I downloaded the link on your site when I first bought this but was informed I installed the Ultimate version and not just the MSFS version. I went back to the link sent but it installed the 3.0.10 again. Also, would like to know - how do I know when there is an update? I guess a change log might get to be a pain to maintain on this forum or just an thread keeping us up-to-date... Thanks, #1 fan lol Purchased 3 times - x2 FSX/MSFS (I forgot I bought this for FSX many years ago and bought again recently for MSFS - but it's ok my way of supporting you guys -lol) …

Hi guys, after updating to the latest MCE is driving me crazy. Everytime when the Fenix A320 (set as default) has completely loaded up, fed with all data and ready to go I start MCE. It automatically arms spoilers for any reason, initialisation progress continues and steps back to MSFS2020 option page. Everytime it is said that it can only be working correctly after a restart of the flight. Shutdown of MCE and flight reloaded. Done. Same message pops up again and again and MCE is not working. Has worked under previous build number! MCE is set to admin mode and everything is on latest. Just gave another try with re-installed FSUIPC registered but not running…

Hello, i would like to ask, what is about the topic "PF3 cannot see AI Traffic" with World Traffic 3 for example. I have read about the new "TCAS Override* " provided by Laminar, which give us the possibility to work with this data. Little Navmap for example shows now AI traffic. (Without the old way to activate AI Aircrafts in the X-Plane Configuration!!!) This brings me to the question, if there are any informations that PF3 with PFETOXPLANE can now interact with the AI Traffic? I found following old topic and would like to ask if this is still the case? Many thanks to sort it out Andreas * https://developer.x-plane.com/article/overriding-tc…

I completed two flights today with the newest MCE version (the one I downloaded via the latest patch link in the Fenix A320 topic). A few issues I have found: F/O doesn't reset the stab trim Rudder trim reset doesn't work During the checklist the F/O confirms "now set" for gear down even though it was down already; same for the APU (off) and probe heat (auto) during checklists The guard for pax oxygen is left open when the F/O checks the switch position At 60 kts on rollout, the F/O calls out "60 kts, reverse green" where reverse green obviously occurs at the wrong point This is a bit of a biggie since it's one of the most useful callou…

I just did a test with the XP12 beta demo and RC4ToXplane--it's triggering a CTD in XPLM at startup. It appears that XPUIPC (v2.0.5.9) is working...so I wonder if RC4ToXPlane might be made to work in XP12, maybe by recompiling with the new XPLM library??

Hi, New to MCE trying to set it with CS757 and CS767 for P3Dv5. Does anyone have proper checklist for the CS757/CS767 ? Where can I find the commands itself ? For example: I tried many time to fond the proper command to start engine2 🙂 Came out with "Engine starter number to to ground" and all I wanted to say is "Start engine number2" 🙂

So I've finally finished translating an airline's procedures for the A320 into MCE scripts for use with the Fenix A320. I know this is still in beta and WIP so expectedly some things don't work yet. Here's a list of what I found. Commands that exist but don't work with Fenix yet: Spoilers disarm (needs to be commanded twice to actually disarm; lever pops back up initially) Instrument brightness adjustments Closing/opening windows Your ND mode set to arc (ND is set to VOR instead) Your ND range to three hundred twenty (no action) Your ND show terrain (controls Captain's setting) Reset rudder trim (no action) F/O flight c…

Hello pilots, Well, lately I have noticed, that I am having an issue with FO radio transmissions not being heard by PF3, and before I will start reinstalling everything, I thought I will better ask if someone is experiencing something similar and knows how to cure that? Here's what's basically happening. I am flying in P3D and MSFS, using MCE and PF3 all together. Mostly flying only two aircrafts, PMDG 737NGXu and Majestic Q400. All of the mentioned are latest versions and I always trying to keep everything up to date. Well, everything goes well, while I am still on the ground, FO does all the communications well and everything just works fine. Until I t…