PMDG 737NGX | 737NGXu

Hi all I don't know if its only me but when im flying the ngx no matter what altitude and there is even small change in the wind direction (even 1-2 degrees) the yaw damper swinging the plan left and right for few seconds then its stable again. I notice this now once I started to use ezdok and I can actually see the cockpit moving. btw once I switch off the YD its now swinging any more. any one else having it ? thanks

Hello! I have been using the PMDG NGX flawlessly for the past couple months. Today, I went to do a flight. I found all the gauges and screens black. Also, the levers and knobs don't move. It says I have full flaps and throttle when I can control it manually. When I do this though, the levers don't move. The control yoke also it stuck all the way to the left even though I can control it myself. Also, the spoilers and flaps I can tell make the aircraft slow down, but it has no visual effect. If anyone could point me in the right direction to fix the problem or it may even be a simple fix, that would be great! Thanks! Will

What is the correct way to start your apu just before pushback and engine start need help can anyone help please. Rob lambert

Hi there. I would like to ask if anyone is having the same problem as me and maybe if can help me. Basically everything is working fine but after landing when i vacated runway i set AUTOBRAKE to zero and the aircraft suddenly apply max brake until it comes to a complete stop. I even tried RTO and when i tapped brakes the autobrake disarm which is normal but when i set it to zero it applies max brake again. could someone help me please thanks...i do all my assignments via FSUIPC by the way...none in FS thanks swadeep

Hello, I've got a problem. The map in 737 doesn't show good airport location. As you can see in this screenshot http://imageshack.us/photo/my-images/43/txoc.jpg/ , although I am on the centre of runway 19R in KIAD, the map shows it is on the right. This issue applies to all american airports, in Europe everything is fine. I'm using navigraph 1309.

Hello gents I recently performed a format and also reinstalled FSX. I've been using NGX sence it came out, but after last FSX reinstall its acting a bit weird. When I turn on main panel lights knob, it immediately sets kmob/switch lights to max, but is able to gradually adjust for markers/descriptions. Also AFDS flood, backround, circuit breaker and pedestal flood come alive way too bright after just first click. overhead and pedestal panel lights adjust just fine though. Help would be really appreciated. Thank you. Also some pictures to describe the situation. Note that all light switches have had only one mouse scroll and are at their lowest on position. I though it co…

Hello! I have been using the PMDG NGX flawlessly for the past couple months. Today, I went to do a flight. I found all the gauges and screens black. Also, the levers and knobs don't move. It says I have full flaps and throttle when I can control it manually. When I do this though, the levers don't move. The control yoke also it stuck all the way to the left even though I can control it myself. Also, the spoilers and flaps I can tell make the aircraft slow down, but it has no visual effect. If anyone could point me in the right direction to fix the problem or it may even be a simple fix, that would be great! Thanks! Will

Hello! I have been using the NGX flawlessly for over two months now. Just now, I am having strange problems. The screens are black and gauges too. Also the control yoke is stuck all the way left visually, I still have manual control. The throttle is also full throttle, but I can control it manually, but it doesn't move. If anyone could help or lead me in the right direction would be awesome. Thanks! Will

Hello! I have been using the NGX flawlessly for over two months now. Just now, I am having strange problems. The screens are black and gauges too. Also the control yoke is stuck all the way left visually, I still have manual control. The throttle is also full throttle, but I can control it manually, but it doesn't move. If anyone could help or lead me in the right direction would be awesome. Thanks! Will

Hi. I seemed to have lost the environmental sound when I deploy the speed brakes in the air. I would be able to hear a low rumble when deployed, now all of a sudden nothing. I have checked the PMDG sound file folder and it's still there and works. All other cockpit, environmental sounds work fine. I have checked my sound card volume settings etc, but it's just stopped working without me making any changes to my PC. I submitted a support ticket with PMDG and they sent me some C++ files to reinstall but unfortunately that didn't solve the problem. So guys if you have any ideas please say Thanks

What is the correct way to start your apu just before pushback and engine start need help can anyone help please. Rob lambert

Im' trying to make a ticket with your system to reactivate my license of 737 NGX and expansion due max activation reached. When i submit a ticket using correct login and password the ticket disappear and i cannot find anything with send ticket list via email. I've tried to look into spam but nothing. Description: PMDG Simulations- LLC. Order: 162870 Please help me thank in advance.

I recently started to fly the PMDG 737-800 NGX. I am having trouble using the autopilot. I entered a flightplan in the FMC with SID, route, but leaving the STAR empty as i don't know which runway i will be landing yet. Usually i enter the STAR and the arriving runway once the destinations ATIS is giving the information. I fly from MILANO MALPENSA (LIMC) to FRANKFURT AM MAIN (EDDF). Before taking off i set both FD on and entering altitude, speed and heading. Once i have taken off i wait before passing 1000ft to engage the autopilot with pilots 'CMD', but it WONT ENGAGE. I am not touching the yoke a The green lights flikkers just the time a press the b…

How to you get to see the passenger view of the PMDG 737 NGX? When I land or take off I would like to see it from a passenger's view. What are the commands? stelios

Hi guys, for some a reason I have to press the 'Q' key to get back engine sound after I changed view. So I am flying, then want to change my view, press 's' to do so press it again to turn back into my cockpit an it is almost silent. I press 'Q' and can enjoy again my sound. What could be the problem? just what I have done is to set in the FS menu my engine sounds to my speakers and the NGX sound,too

Anyone know off by hand any airlines that are currently using the Split PFD/ND displays? I only know of United right now. I'm looking to do more flights with this setup and would like to keep it realistic if possible. Thanks in advance for any input.

Nav 1 frequency is changeable on the ground but several times when I try to set ILS frequency before arrival I have found the frequency locked. The click spots are there but they do not work. Nav 2 is fine. Any suggestions please? Dean Logan

After a reinstall of FSX i am trying to reinstall my PMDG products. When I try to run the 737NGX 6700 OR 8900 i get the following error message: PMDG 737NGX version 1.00.3057 or later requiered before you may install this addon. Please path your NGX before installing this product. A similar error message is shown when I try to install the 8900. What have I done wrong? I can NOT download a new version from my account on PMDG as the url has expired. How can I get the "basic" version so I can install the NGX? __________________ So I went to the PMDG shop and bought an extended download service for the PMDG 737NGX (All packages). The order shows up in my …

Hi guys How to you get to see the passenger cabin of the PMDG 737 NGX? When I am landing I would like to see it from passenger view. What are the commands? stelios

Hi folks, yesterday evening I was trying to shoot down the ILS approach runway 23R in Duesseldorf (EDDL). Everything was set up and identified, when on intercept heading I was cleared for the approach and pressed the "APP"-button. Now here's when the "strange" things startet to happen: - on the FMA it said LOC / G/P - on the upper left corner of the PFD the ILS identifier changed to the frequency (109,3) - also did "ILS" on the PFD change to LOC/G/P I suppose this has something to do with the IAN capability of the NGX, which I'm not familiar with, because we don't have airplanes with that feature in our fleet. Though I know, that you have almost the same i…

Hello, sorry for my poor english... I created a livery with the affixed psd file and saved in dds. But in fsx the texture created isn't defined as the PMDG liveries. Can I create liveries in high resolution?

Hola, My trusty 737 NGX is failing to capture the glideslope at the mo - would anyone know how to correct this. ( it picks up the localizer really well &, I approach at the right speed/height blah blah.) I've just reinstalled FSX & all my A/C etc., I've added SP 1c only, to my 737 - do I need to add SP1/B as well ? Muchas Gracias for any forthcoming help, …

Hello. I purchased the PMDG 737 a couple of days ago based on the outstanding reviews it has received. Installed, and realized how much reading I had to do...much of which would be extremely useful to have open next to me during flight. So with trepidation I copied the flight manual pdf's onto my Kindle Fire, not really expecting them to work but figuring it was worth a shot. To my extreme delight, not only do they work, but they are perfectly formatted and readable on my Kindle Fire! So, thank you very, VERY much for going through the trouble of ensuring that these documents work on a common tablet. Just the fact that the manuals and checklists are fo…

Might have been asked before, but could not find any reference to it. I know I can change the cabin layout between a single and a dual class layout. But is it also possible to change the number of passengers per class? Reason I ask is because of the upcomming PXPF, where you can specifiy the max number of passengers on board. Different airlines have different layouts with different maximum number of passengers. No biggie if it isn't possible, just wondering..

Hi Guys, Great News ! WOOT! CALGARY, Aug. 29, 2013 /CNW/ - WestJet (TSX: WJA) announced today it has entered into a letter of intent to purchase 65 737 MAX aircraft from Boeing, consisting of 40 737 MAX 8 and 25 737 MAX 7 aircraft, with delivery scheduled to begin in September 2017. MORE: http://westjet2.mediaroom.com/index.php?s=43&item=807