Button Control Version

I use fspax with fs2crew, sometimes the aircraft fails and i have to make a emergency landing. Is it possible to call for the emergency checklist?

A user has recently uploaded these...They show the 'Button Control' version in action.He's using the UK voice set.http://www.youtube.com/user/tastyryanCheers,

Is it possible to have the FO/PNF silence the alarm after disconnecting the A/P on approach? I have to do it myself or it goes off right till shutdown.

Hi all and thanks to the dev. team great product. Im new to fscrew and recently purchased for the NGX and love it adds new dimension. Would it be possible in the future (i know your busy with dev etc) to add an Australian voice set to the Crew Region for us Aussies out there. Would make it that little bit just more realistic for us downunder. Obviously i dont know how many Aust have purchased this but if the numbers are they i hope it could be considered. Keep up the great work.

Hello, Up until version 1.3, I had my audio setup configured to use my USB headset. After I installed 1.3, the audio from FS2Crew, goes to my main speakers, and not my headset. In the audio setup, I see my headset and have it selected. If I go into the audio setup in Windows 7, I can verify that the headset is working properly. The headset sends/receives from Squawkbox correctly as well. Any ideas would be appreciated. Thanks! Mike

One little issue I have come across is that, with transition level set to 10000 ft in the FMC, although the FO correctly enunciates this when passing through 10000 while climbing, on descent he does this at 18000 ft. Is there something I have missed here? Bruce

I got a weird problem. I can not get fs2crew to work correct whit the NGX jusing P3D. Everything is loading fine, but when i push the button assigned to the "autofeather" the display disappers. When i push it again it will come back. I can hear the FO speaking, but it is impossible for me to respond. Everything else seems to be working corrrect. Also the right side of the display box is working correct so i am able to communicate whit everyone except the FO. Any help/suggestions would be appreciated. Dont know if Fs2crew officially support P3d yet, but i reed somewhere that it would work after the last SP. Thank you!

how can i configure the fscrew to start the electric power with ground power and not by the apu?

Should not the FO set the a-ice on if it has been set to REQUIRED in the app briefieng? Regards Pedro

Hi, I love this add on which is wonderful.The only thing on which I am intrigued is whenever an answer is "checked" the voice is female! The rest is a male voice, is she sitting on the jump seat? Has anyone noticed it? AlainV

Hi!I recently hav had the issue that the FO won´t set the MCP accordingly on Takeoff. When I call for Heading Select, he says it, but it won´t activate. The same happens with LNAV or Command A on some occasions.Don´t know what is causing this.I reinstalled the NGX and FS2Crew, but the problem is still there.

Hey all, I have just recently installed the most recent update and am loving the product so far. I seem to be having problems with my panels not displaying correctly. They appear all squished and I cannot change any parameters in either the briefing or PA Panels. Has anyone had the same problems? Im going to try and reinstall again and see if it fixes the issues. All The Best Brad

Hey Guys, Just in the process of my first flight with SP1 and I was going through the after takeoff checklist and the FO called out "flaps down" and then "descent checklist" was announced. I'll do another flight to make sure it wasn't a glitch. Wondering if anyone else has experienced this? btw, brilliant product. Simply loving it. Cheers

Hi, I get a "dingdong" sound every 10 seconds at the end of the flight (after landing for example). I use the button control version. I saw the same problem in a post with the voice button version : http://forum.avsim.n...ery-10-seconds/

As mentioned in a topic after sp1 is released there are still problems with fspax. There was several posts about this issue. Unfortunatelly it seems that nothing was done to solve that problem. Possibility exists to solve problem manually (manual modification of a config file) but this is a bit complicated solution. Guys from fs2crew what is a problem with that? You mentioned that the issue with fspax should be solved in sp1 obviously it's not. Generally I am facing a problem. Run fs2crew without fspax or switched to fspax. I would like to have both since these applications are commonly used in fs world. Best Flightex

Hi, Yesterday I bought this fantastic add-on. :) But is there an way to pushback with AES and FS2Crew?

In the original version I could click the click spot in VC to bring up FS2Crew. Since SP1 I cannot. Art Schwartz, Jr.

Hi FO says we're not configured for engine start. This is my problem and I was wondering if anyone could help please. I looked thru the other posts and from what I have seen, I have tried the following... 1) Reinstall SP1c 2) Reinstall FS2Crew 3) Ensure NGX in PMDG cold and dark state 4) I can alos confirm I followed the instructions when I purchased the softare about reinstalling sp1c etc etc. I have been starting from cold and dark and letting the FO do everything including RUN Pre Flight events. I have also followed the guide / tutorial to the letter. Also when it says "we're not configured for engine start" If I manually start the engine then it…

Hello FS2Crew-Team! I used the 737NGX button control 1.0 without any issues not listed in the SP1 documentation for 10+ flights. After downloading (04.04.2012, 14 UTC) and installing the new FS2Crew version some problems occured. I uninstalled and reinstalled both FS2Crew and the PMDG NGX (SP1C) but the issues are still there. I´ve read the manual and the "ReadMe First.pdf"! - FO sets the parking brake - in 1.0 and according to the manual the PF should set the parking brake - FO sets the PF flight director - in 1.0 and according to the manual the PF should set the FD. - FO doesnt set the cruising level in pressurisation panel - the FMC is set up 100% and he…

Hi I have two problems.One is reported already and that this the NGX loads in the VC mode although FSX is configured to load in 2D. My default aircraft is the Trike. In relation to this problem when I switch to the 2D cockpit and start FS2crew it statrs OK. Once I move to the VC, the FS2Crew Menu disappears. I can bring it back via the hot spot but after each check list item confirmed the sim switches to the throttle quadrant (no matter where I am in the flight phase) and the menu disappears. I have to do this for each check list item: Go to the Throttle, back to Captain side of the aircraft, reopen the FS2Crew menu, go to the next checklist item. I do not think that…

Hello everyone, I have the updated fs2crew button control version installed after a fresh reinstall of the NGX. The first leg always goes perfectly well, but seems like I cannot get Fs2crew to work perfectly on the 2nd or 3rd legs before it crashes. It always seems to crash the sim during preflight of the 2nd or 3rd leg or some other point along the flight. Any ideas as to why this is happening? Gidel ward

Hello,i have big problems with the sound. The sound is sometimes loud then so quite that i understand nothing. In the sentence of speaking, the sound jumps loud. This sound volume jumps and drive me crazy.I use creative sb xfi pci card. I dont have this kind of issues with any other program. I hope you can help me out.Swen

Bryan, found another error that I forgot to mention, and I do apologise for not mentioning before the little update you just did for the doors. During the "Before Start Checklist", there is no readback for "islation Valves" when the FO mentions ISO..... Cheers Julian

GuysI bought FS2Crew NGX on Thursday. So, I had almost no time to enjoy before SP1. Actually I could do just one complete flight and various test flights and then I upgraded to SP1. But let the facts thatseem strange to me:1. I am using the Control Button Version. During those 30 minutes prior to the flight, I do not listen more the FO tell me that he will take the walk around.2. At T +18, I did not hear the ground crew to ask me about the start boarding. It just appears the option to speak YES. I think before SP1 was the voice of the crew member.3. At T +8, simply appears the option "L. SHEET - THANKS" with no voice from the crew. I think there also was voice before.4. A…

Bryan, I have issues running FS2Crew and FSCaptain together. When i install both, then I cannot click on any section of the VC. If I uninstall FSC, then I can run FS2crew. If I deactivate FS2Crew then I can run FSC.I read about panel issues with FS Passenger. Am I facing a similar issue? Can you guide me through any steps needed to fix this?Thanks in advance.Jose