Yes, the 737 is in the Ops Center, I'm ignoring the SP1 message, configured my buttons but when I start FS2CREW nothing happens. Except the left PFD shows up big.

Please help

Help Please

Joao

I have the legacy version of FS2Crew without Emergency NGX. When using the US voice set, the FO's V1 callout is made by the EU FO. I am running service pack 1D on the NGX. I have tried reinstalling both FS2Crew and the NGX itself with no luck. Thanks in advance for any help.

Brendan McReynolds

I am totally new to FS2Crew but not new to the PMDG 737.

Have just bought Reboot and am using button control SOP Set 2.

Loading the PMDG 737 with the 'Long Turn' Panel State.

Config Set Up all OK.

Keyboard assignments for Main and Sec all good and working.

All went very well and easily so I am following the Tutorial but I have a few [idiot] questions.

What I am struggling with is the interaction between Captain and FO and their respective responsibilities.

Can I assume that anything labelled 'Procedure' in the Tutorial is just a series of actions carried out either by me [manually] or the FO automatically ?

No problem there but I dont hear the FO say a single word about anything he is doing - is that right ?

I wonder if I am missing something with the intercom/radio settings ?

In relation to checklists. I can bring them up in the Main Panel, scroll through with the down arrows but I hear nothing from the FO.

Again I must be missing something !

If anyone could give me a shove in the right direction on the above then I am sure I will be able to get a grip of what follows.

Thanks,

Mike Ody

Can someone advise me what to do in these circumstances and how I can restart FS2Crew?

Kind regards,

Keith Giannoni

 I'm currently flying over the Pacific from Honolulu to Anchorage and I accidentally pushed the Run PF button instead of the Approach Brief button. Will that mess up my landing at all or will I be okay? Hopefully I'll be okay!

Mahalo for your help

 James Stump

I skipped FSX and purchased NGX for P3D 2.5 only. I don't see that there is P3D installer for NGX FS2Crew on your website. Any idea when it becomes available?

Thank you!

Dmitriy

  I haven't seen this topic posted before, but if it has please direct me to the post. Any way, after installing the latest update for the PMDG 737, I ran into a problem with the first officer's voice being omitted. The only sound coming out of him is calling out " starter cutout" after the engines have been started.

  I have run the FS2Crew configurator and I do get the message that I don't have the service pack 1C. I even added  FS2Crew emergency hoping that it might have the appropriate updates. I now show starting up FS2Crew that I am running 2.3E.

  I am at a loss on how to fix this. Any help is greatly appreciated!

Thanks in Advance

After installing the latest version of PMDG 737NGX into my steam folder (Now have a side-by-side install) I'm unable to get FS2Crew working on the steam side. It seems to work fine on the original, and parallel, install "Program files(x86)/FSX" even though I'm getting an error stating that FS2Crew will only install on existing versons of SP1C or higher. Now that PMDG is using version numbers, instead of SP1, SP1C etc, how can I install FS2 Crew and by-pass this issue?

For the record, I completely uninstalled the 737NGX from both installs, as suggested by PMDG, and reinstalled in both versions of FSX.

I am a boxed version owner so had to wait until the newest update.

Any suggestions would be very much appreciated.

Thanks in advance.

Dave Bulman

I've noticed that in the NGX, when the departure is before or during sunset, the FO does not touch the internal lights when the night comes. Am I missing something?

Best,

As a result I can not configure FS2CREW.

Previously I installed FS2Crew for the Airbus and for the PMDG 777 without any problem whatsoever. 

Appreciate your assistance, thank you

Ed Schlatter

Mike Collins

I wanted to fly a second leg after a completed flight, without reloading FSX and the NGX (it was my first attempt with a second flight and FS2CREW).

I loaded the NGX LONG state, inserted my weights and changed the Primary Display of Button Control to "Preflight Checklist".

I tried to start FS2CREW via the CFG button and "RUN PF" after setting up my values in CFG.

The countdown was counting down from 30min, but my FO doesnt started to set up the plane... I had the "I am out for the walkaround" call from him, but nothing else.

Now I am not sure if I had made something wrong in setting up or if this is a fail or something else?

Thank you very much!

Klaus Schmitzer

I just reinstalled fs2crew on my new pc, and now after take off, instead of just giving me the "cmd a" prompt after takeoff (400ft), it gives. L nav, vnav.. But then it actually deactivates it, because I armed it at the gate already.

I'm not sure what I do different.

Any tips/ trouble shooter?

Vkr

Victor roos

My question is if Fscrew pmdg 737 ngx button version have the comand to turn on "Yaw Damper" or not after engines runing. I have to do that manualy allways.

After the fscrew update nothing change about that.

Maybe Fscrew have a solution ?

regards

One thing more, way fscrew doesn't have "flaps 25" on approche ?

thanks

I am going crazy here.  I am trying to use FS2Crew NGX Button version.  Until recently, I could always play all the audio through my headset, but now, much of the expected dialogue only plays when I have my speakers on.  I have tried it with the Headset (HS) button on, and off as well.  I have 4 audio choices in the CFG panel to choose from, and I have tried all 4 of those - and I am still getting mixed results.  My sound card is an M Audio Delta AP192 sound-card.  My 4 choices in the CFG panel (and also on the PMDG 737 sound options menu) are as follows:

"Line 1/2 (3 M Audio Delta AP 192)"

"Realtek Digital Output (Realtek High Definition Audio)"

"Realtek Digital Output (optical) (Realtek High Definition Audio)

"SPDIF (3M Audio Delta AP 192)

I have tried each of these 4 options, and I have tried them with the HS button on the FS2Crew panel pressed and un-pressed.  I am still getting some of the dialogue to play in the right channel, and other times it will not play in the right channel.  The earphones are perfectly fine for everything else I use them for, and the sound always plays in both channels whenever my speaker are on.  I never used to have this problem.  Anyone know what could be the issue?

Thank you!

Chris Catalano