FS2CREW: LEONARDO MADDOG (Legacy Version)

Attention FS2Crew Maddog Drivers!SP3 is now available!SP3 adds support for Maddog 2010 and Maddog 2008 SP1 (including the optional analogue panel). It also fixes some minor bugs, adds new functionality, and adds some new voice commands.Requirements:1. Legal copy of FS2Crew Maddog Edition.2. Maddog 2008 with the latest version of the SP1 available from Leonardo or the Maddog 2010.FS2Crew Maddog Edition is available for purchase via this link:FS2Crew Maddog Edition Sales PageService Pack 3 (SP3) Download link:www.fs2crew.com/cart/Updates/Maddog_SP3.zipIMPORTANT!THIS UPDATE IS NOT BUILT INTO THE MAIN FS2CREW INSTALLER. EVERYONE WILL NEED TO INSTALL IT!!!After installing SP…

Videos : Start engines LFML IFR arrival Cyril

Please answer this poll!I'd like to know what you all think.So who's your favorite FO?Thanks,

Please answer this poll!Thanks,

Hi,any Chance for one Flow Chart?best RegardsJulio

I just got my hands on the Maddog, and I was looking into purchasing FS2Crew for it and I saw in fine print that XP 64 does not support a component required to run the new voice commands.Is this infact that case, that XP 64 cannot run the new FS2Crew, and will this mean I will not be able to buy any future FS2Crew products like the JS41 and the 737 NGX?

Attention FS2Crew Dog Owners:Audio Engine Update file:Note: File Updated 14 April 2010An interim update for the Audio Engine is now available. It should correct the issue where some sounds would stop playing after a flight was "reset".Please read the included Readme:Click here to download.Comments on the upcoming SP2 and new Maddog Update:As you are probably aware, Leonoardo will be releasing a new update for the Maddog soon.Contrary to what some people speculated, Leonardo is still very much in the Flightsim business!I'll be updating FS2Crew for the Maddog accordingly once the Maddog Update has been released.Best,

Attention FS2Crew users and Maddog Drivers:I'm proud to announce that the Maddog version is now available for sale on our website!!!To reward our loyal FS2Crew customers, a special coupon code is available to anyone who has every purchased an FS2Crew product before.The coupon code is: PREVIOUS OWNERThat will give you 25 percent off. Just type the code in the Coupon Box on the Checkout screen in our E-Commerce system.Important: The code expires Feb 21st, so act now to take advantage of the code.General Product Notes:FS2Crew adds a complete flight, cabin and ground crew to your Leonardo Maddog 2008 aircraft.Users assume the role of the Captain/Pilot Flying in the simulati…

FS2Crew has a new iPhone/iPod App out!!!It displays the FS2Crew News Feed...http://itunes.apple.com/us/app/fs2crew/id351618713?mt=8

FS2Crew: Maddog FAQs and Troubleshooting:Question: Is my machine good enough to run FS2Crew for the Maddog?Answer: If you can run the Maddog aircraft, then you can run FS2Crew.Question: The Voice Button doesn't turn on.Answer: Make sure your Speech Recognizer is set to English (if using XP) or English - US (if using Win 7 or Vista). Also check the Speech Init log in the FS2Crew Maddog Config Manager.Question: I ordered but I have no download link. My order status says Pending or Awaiting Payment.Answer: Sometimes this can happen if your account information does not match up with your payment information.If it happens to you, just send me a polite email and I'll update …

I installed Maddog Reboot as instructed: as admin, AV off, enabled in Leonardo control panel. The FS2Crew windows are black. I opened panel.cfg and noticed that entries are there (Window09 and 10) but actual Windows sections contain only gauge data. There is no general Window data like pos, size, etc. How can i fix it? Regards, Kris

Hello, I recently purchased the Fs2crew for my maddog MD82 and installed it as instructed. But the main panel refused to open when i clicked the MFD. I have checked the panel to see if the gauges were installed and yes they are there. I have ran the registry repair tool and have re-installed but still no show. I have also checked the registry test in the fs2crew manager and yes it has shown the link. So why doesn't it appear when I click in both the 2D and the VC panel. Thanks

Hi. I can't seem to find the PDF file that came along with the voice command add-on. I believe I accidently deleted it. Does anyone have an extra copy? Thanks!

Hi..i can't find a button control version...is there none available?...does the voice edition do button too? Thanks.

A button control FS2Crew for the LS MD80 would be a sure sale for me. Any one else? Any chance of this happening?

Hi All, I had a quick scan through the posts and couldn't find my particular problem, to whit... every time I go to the manager and set up facility in maddog it wipes Fs2Crew from my panel .cfg, has anyone else had this problem? if so what's the fix? At the moment I have a backup .cfg on my desktop which switch with the now denuded .cfg in program-fs9-etc. well you get the idea! but it is a little tedious, I also have mouse for yoke which also disappears. mog

I hope somebody still visits this forum who can answer a question for me. I purchased FS2Crew for the Maddog and have gotten to the point where I'm pretty comfortable with the checklist flow with the FO. The problem is that I never hear any announcements from the cabin crew; the welcome briefing, safety briefing, prepare to land announcement, or after landing announcement. Is there a certain trigger that has to happen in order to hear these announcements? Thanks in advance for any help given.

Disregard, I think I figured it out.

Hey everyone, I know this is probably a longshot, but I'm having a problem with the VC loading on startup with the Maddog 2010 with SP2 edition. I registered on the Maddog forums three days ago, but still do not have permission to post there. The whole forum seems to be dead anyway. I can get to the VC after starting FSX by pressing F9, but then none of the switches are clickable. I have searched everywhere for a solution but can't find one. I did see on the forums there that there was once a "Quick 'n' Dirty" guide for the Maddog, but the link for it no longer exists. If anyone could give me some assistance on this it would be much appreciated. I realize this is the foru…

Hello, last week I did a flight with my friend in shared cockpit. Everything worked great and it was just awesome. Today we wanted to do some flights again, but shared cockpit is not working anymore. We were both in Oslo at the same gate in singleplayer. He was the Pilot Flying and I was the PNF. We selected "start multicrew session as PNF/PF" at the same time. Thereafter my simulator loaded for a long time and we were not able to connect to each other. I have absolutely no clue what is different to last time and I hope you can help me. Thanks for your help!

Hi out there, Since days I try to reach the official LSH Maddog forum. But I only get a message IPS DATABASE ERROR. Am I the only one or have others to that problem? Cheers Tom

Hi ! I use FS2crew on my PMDG, Majestic, etc aircrafts and I puchased today the MADDOG version. A few concerns here: 1: The FO do not power the Aircraft and makes all his tests blind in the dark (at night) if I do not power the MD. 2: Fs2crew gauge is only available on 2 panels (mainly the 2 analogs panels version) and not on all other versions: how to fix this ? Thank's a lot for any help regards

Hello Bryan,I have a request concerning the FMS in the Maddog. It has nothing to do with FS2Crew: When I'm in the VC there is no clickspot to open the FMS in it's own 2D-window (like it is possible in the 2D-cockpit). For me I cannot program the FMS in VC, I need a 2D-window!But I see, that you have made an icon to open your FS2Crew windows when clicking on the PFD. Though, how can I make an icon to open the FMS in a 2-D window, if I click on the FMS in VC? Can you give me any hints..........or can you even program that icon for me/us? I don't think that this is very difficult (if one knows what to do). But it would be very convenient to open the FMS with a mouse-click in…

I have looked through out all of the manual, and I have not been able to find out what the maximum range of this aircraft is. Can somebody tell me what the max range of the Leonardo Maddog is?

This is the only aircraft I have this problem with. It will not lift off the ground on takeoff. I have FSX and windows7 64. Everything is installed as run as adminstrator. Any help will be greatly appreciacted.