System Hardware: PC | MOBO | RAM | CPU | HDD | SSD | PSU etc
For discussion of issues with Motherboards, RAM, CPU's, hard disks (HDD) and solid state (SSD) and respective drivers, best desktops/laptops, and other general hardware discussions. See the Video and Drivers forum and Hardware Controller Forums for discussion related to Video Cards and Driver, and Joysticks, Pedals, Yokes, etc.
18651 topics in this forum
-
What do the different settings under the advanced settings mean? I know what some of the mean,but what about these, and should they be turned on/off?- Conformant texture clamp- Extension limit- Trilinear optimization- Aniso mip filter optimization- Transparency antialiasing- Negative LOD bias...and so on. What are some of the best settings with regards to fs9, or what are your settings?
-
My computer (Toshiba Qosmio) has crashed AGAIN! :-madI want to buy the best computer and the best of everything, especially the video card.I want a computer that can run FS2004 in any plane in the virtual cockpit (such as the Level-D 767; PMDG 747, 737 series; Captain Sim 727, 707) perfectly smooth -- 20 to 30 frames per second so that the gauges flow smoothly, even in extreme weather (such as overcast 2,000-5,000; broken from 6,000-15,000; and thunderstorms up to 30,000).I want to be able to have that kind of weather and the virtual cockpit with all the simulator performance settings set to full (such as the terrain quality) and STILL get 20 to 30 frames per second. I …
-
- 7 replies
- 826 views
-
-
hi,i got a dfi ultra-d mobo in april as part of my new setup,things where working fine until a month ago.now i cant event get to the bios,i just get a 2-3 second beep every 2-3 seconds.there will be the odd time that it will start normally,but i have to leave it on all day or forget it.this all happend out of the blue,and after i had finally got fs9 running with no stutters and good frames.after reading on the dfi forums i noticed that this has happend to many people with the ultra-d&sli.so i guess its a new mobo(asus i guess?),more money and install everting again and hope i can get it as smooth as it is now.i wanted to share this in case anyone is thinking about thi…
-
- 2 replies
- 752 views
-
-
Hi everyone!Just bought a 512mb kingston card 400DDR... now to install it I just need to plug it into the memory slot on my MOBO??? Or is there any specific procedure that I should follow for doing it??? My MOBO is an ASUS K8V SE X series.Many Thanks,Lucas.
-
- 1 reply
- 712 views
-
-
Guys, I am trying to use an extra set of logitech Momo pedals for the rudder. They are registering as combined pedals under the rudder axis but they are opposite to what they should be. Left goes to right. I have checked the reverse setting but it doesn't apply and doesn't work? Any suggestions.Thank you,Todd
-
Hello, I am trying to install a pair of logitech momo pedals with my usb stick. They are registering as combined axis but are backwards. The reverse tab will not work and the check setting wont stay? ANy suggestions.Thanks,Todd
-
I just intalled this monitor ..... the addition realism added with MSFS in "large" widescreen is breath taking ...IF you are contemplating getting a large widescreen .. this one (24" widescreen) comes highly recommendedVern:-jumpy
-
- 50 replies
- 5.2k views
-
-
But I have a question. Is this legal to sold "flightGear" for example on ebay (I mean copy). I am asking because i have seen many.
-
I have just ordered a Viewsonic 19" LCD monitor and I know it comes with both the standard analog cable and a DVI cable. I have read that DVI gives a better display. My current video card is a ATI 9800 Pro which I am satisfied with, however, it does not have a DVI connector on it. My question is would it be worth it to buy another card in order to use DVI or would the improvement not be worth the extra expenditure. Anyone have any experience with comparing the two methods of connecting the monitor to the video card?Thanks for any guidence. Jim
-
- 3 replies
- 787 views
-
-
Hi All,I have a nvidia 6800gt GC. currently with the 66.93 drivers, I am trying to update the drivers, I used the Driver cleaner program to uninstall old ones, But everytime when I install the new ones I get an error message saying that the parameter is incorrect, Doesn't matter what version I tried to install, 77.77, 77.81 etc.. Still the same, I've read a lot of post concerning updating drivers, I ran the cleaner in safe mode, downloaded drivers with accelerator turned off, Tried just about everything, pretty much ready to give it up.. Was wondering if anyone else encounters this error message before, while installing drivers.. Hope someone can help... …
-
I just bought a new Dell XPS Gen2 laptop (specs as in profile below), which runs FS9 better than any desktop I've ever owned. But I have a problem with the sound. It's not there all the time - so I know the laptop can do better. But far too often engine sounds produce rapid stuttering, which is very disconcerting (and disappointing).Nothing I change seems to make any difference - half the time I get the sound problems, half the time I don't. (The sound is onboard - I've ordered an Audigy Z2 notebook PCMCIA card today, though not sure if that will help if I thought it would cure the problem, but, as I say, if the sound is good half the time, why not the other half?). I ha…
-
Anyone aware of any upcoming deals from Dell for the holidays? When do you think they might offer some things? I am in the market for a new PC and have my eye on the widescreen LCD monitor-2405. I keep checking their site hoping that something will pop up shortly.Thanks!Airbus
-
- 0 replies
- 674 views
-
-
It appears that Microsoft are either unable or unwilling to offer driver support for USB2.0 supported by VIA KT333 chipset. I understand that only Microsoft are licensed to provide any such updates but since the emergence of Windows XP SP2 there is no USB driver support. I keep all my downloads and files on a USB HDD and it gets very frustrating when they cannot be read on occasions.It also appears that for those of us that received an OEM version of Windows XP Home there is no facility to quiz Microsoft as to how, why and when? The only way I can find to get in touch is by contacting a support professional which generally costs money. Microsoft advise any person with OEM…
-
My system:XP Pro SP2, Directx 9.0c, Intel P4 3.4EE, 1g Corsairs TWIN1024 PC4400, ATI x800XT Platinum.I have all PMDG's, Simflyers, Imagine, Flytampa sceneries, Active Camera, Walk & Follow, latest FSUIPC, UT, Utarrain, ASV.I have no idea on how to get rid of these moving graphics. It was working fine and all of a sudden there it was. I've even replaced my graphics card and reinstalled FS9. Please help.Wilbert
-
- 6 replies
- 837 views
-
-
Hi folks, I just got a 6800GT 256mb and as everybody knows (everybody but me! ...should've researched more before I bought it) the shimmering is really annoying! I've tried all the drivers from 60.xx. to the latest beta and many many different AA/AF configurations, but the shimmering still bothers me. The best I could get was using high resolution(1200x that's the max my monitor can handle) and even 16xAA(!)/16xAF(!) but the shimmiring is still present and my monitor can't display this resolution with a good refresh rate. Is anybody here using the same card at 1600x? How is the shimmering? I'm wondering if I should return my card(pay restock fees+ shipping) and get an …
-
Well, I turned off the page file to see what would happen. Start up FS and see what happens. I have 1 gig memory. Normally I let Windoze manage it and the physical memory available reported by task manager runs around 350 megs extra. With the page file off, memory slowly went down to 90 megs left. I turned the page file back on and the amount of memory rose back to about 200 megs. I wonder if I had 2 gigs whether I could leave the page file off? Would that make any difference in anything? Loading everything should make less disk access but that might be probably it.JimCYWG
-
- 4 replies
- 937 views
-
-
When using MSFS9, the game crashes after about 1 hour. No matter what im doing it crashes. I have gone to microsoft website to find help, did what they told me but still crashes. I have reinstalled msfs9 at least 3 times already and have updated ALL drivers. Its getting frustrating! But it always crashes about an hour after starting. Also... the whole game slows down super slow the computer. Usually i have to hard restart.
-
- 23 replies
- 2.2k views
-
-
Hi all,I just got my new rig running, and need some advice on the nVidia 7800GT card. I have the latest drivers, and with all settings maxed out in the driver and fs itself, it's running at 60 fps with Cessna in easy environment, and 30-20 with Herc/PMDG 744/PS 777 at busy larger airports in complicated weather (ASV). For me this is fantastic, very fluid. But:1. In the Create flight and pick aircraft windows I don't see a preview of the planes.2. The FsForce trim display creates a full black line at the bottom of the screen, not just a square surrounding the number.3. Looking at the landscape in perspective, the ground gets blurryer in steps, with a very visible transisi…
-
- 5 replies
- 1.1k views
-
-
HI guys,i know it time to change my vid card. I just have no idea which to buy.I sort of made up on the 6600GT but the specs on the X700 looks good too.Here are my choices.6600GT 128mb DDR3/GDDR3X700 256mbThe higher cards are out of my budget. How's the 6800LE. I've heard about staying away from LE cards. But is it true in this case where the card has more pipelines?Thanksby the way. Here are my com specs.P4 2.6, 512 RAM, Nvidia FX5200 128mb.Not sure to upgrade my ram or video card first?
-
I just build a new amd system thanks guys for the imputim playing it on my mitsubshi 60" dlp tv and im trying to use 1280x720p. However my i cant see the edges on my tv it says it would need 1150 x 640. 2. Im getting 20-30fps sometimes even 15-25 fps when i go to miami or jfk or when i look straight at clouds. also Hey guys 1 more question. I have been playing ms-sim and on far distance scenery such as 15nm + it looks blurry also when im on apporach and i have the airport in sight less than 10nm and i can see terminal buildings I cant see runway lights. Only until im 5-7nm away or even less sometimes. At night either my night scenery looks very blurry lighting or it looks…
-
Hi folks, I have only about $700 max to spend on a new system but I'm not sure what to get. Can any of you suggest a system that would run FS2004 with decent fps :) and that would fit my budget? I'd like to go for AMD + Nvidia. Thanks,Leo PS- I'm in the US, and wouldn't mind to buy the whole thing online.
-
Hi AllFS9 is running on a Pentium 2.4 with 1 gig of RAM and a Leadtek 6600GT with AGP8X - SB Live! 5.1 surround ...Until recently this setup may have huffed and puffed a little - however, it seldom failed (even when running ASV-enhanced, LevelD 767, FSSFX, and CH yoke, pedals and throttle quad. However, I have recently purchased PMDG747 'Queen' and Captain Sim C130. Somewhere along the line, my setup has discovered the habit of 'freezing'. The graphics freeze, the keyboard locks and a really irritating high pitched 'whine' comes from the sound card. I have updated sound card drivers and video drivers. I have tried running FS9 without any other elements (ASV etc) star…
-
At busy airports with F S Traffic only set to 45%, the aircraft textures take forever to load, I only use DXT3 textures Level D B767.Any idea's?Win XP, AMD FX 57, Nvidia 7800 GTXBest Wishes,Chris
-
HiI posted here a few days ago regarding computer crashes, I think I'm beginning to narrow down. Flight sim now crashes with an error due to fe.dll, however, I can keep on playing flightsim, just the graphics card seems to give up loading textures.The problem starts with the screen going totally black, and a lot of hard drive activity, then I have to ALT+ENTER to exit full screen mode to see what the problem is...fe.dll error appears, I can then go back into full screen mode and continue what I was doing but with dreadful graphics.Cheers[br][/img][/font][/b]
-
I had Control Manager v3.6 installed and all was working OK.Today suddenly the sys couldn't find the Yoke and Pedals.So I unplugged them and uninstalled the Control Manager.Rebooted, disabled AntiVirus and ran the Setup.exe onlyto get this error message:"Can't run 16-bit Windows ProgramCannot find file C:CHInstallSETUP.EXE (or one of its components).Check to ensure the path and filename are correct and that all required libraries are available"Not sure what it's all about all other programs seem to workfine and no viruses/trojans/etc present. Would appreciate anyhelp/advice to sort out this poblem.Tried to send CHProducts an email but there is something wrong withtheir we…
-
- 2 replies
- 664 views
-