The FS2004 (FS9) Forum

Over the past few weeks I've been patting myself on the back for how smoothly FS9 was working and that I had it all tweaked, loaded with tons of great addons and was almost forgetting to fly FSX-SE.... Big mistake. Note to self - never, ever allow yourself to think that you now have a trouble-free sim setup... In the past two days I have started getting an incredibly annoying micro-stutter. With FPS limit set to unlimited I can be at a scenery with loads of AI and FPS in the hundreds but every few seconds everything stops for just a microsecond. It happens when I pan the view in VC or if I go to outside view and watch the movement of AI on the ground. For just a momen…

Hi guys I have just installed about 360 WoAI packages and they are not showing!I have never had this problem before. FS9 Win7 64bit. Thanks for any help Rob

FS9 has some world texture errors, mostly in the East. Anyone know of any fixes? Check this video I made of the error.

Hi everyone. Good news! As you are probably all aware, I uploaded the POSKY/SkySpirit-PSS Boeing 777-200ER merge a while back now, and it was very successful. Incase you haven't here's the link for it (http://forum.avsim.net/topic/392445-new-poskyskyspirit-pss-boeing-777-200er-merge-packages/). Well... finally the time has come. I have packaged up the long awaited Boeing 777-300ER! So without further delay, i'll just present you with the list of what it contains and also the download link. Here is the full list of FEATURES (also included in the README): The latest SkySpirit 777-300ER models have been used. VNAV fixed. VNAV profile works better. FLCH fixe…

Hello everyone and sorry about my English. Is there any way to configure the flap canoe degree? I've merged a 747-400 Posky/PMDG. It works fine except because of the outter flap on the right wing. When I set flap 5 or 10, the tip of the canoe, only on the right wing, appears through the flap. I'd like to understand the flap instrucions in aircraft.cfg to try to solve this. My current flap configuration is below (came from Brzl, posted here in Avsim forum): /[flaps.0] /type = 1 // Trailing edge /span-outboard = 0.8 // 0.0 .. 1.0 /extending-time = 25 // seconds /flaps-position.0 = 0 // pseudo-degrees /flaps-position.1 = 0.0…

Those of you who have downloaded the wonderful freeware Hungarian sceneries and AI made available by LHS Simulations know that they are equal to or better than any payware out there. Yesterday I purchased their payware scenery of LHPR Gyor-Per and LHBY Bony-Gyorzentivan. The first is a small regional airport and the other a tiny rural grass airstrip. Not very interesting you may be thinking? You would be very, very wrong. For 10 euros over at Simmarket you get the most incredibly detailed yet absolutely FPS-friendly scenery imaginable. And you get highly-detailed 56 square kilometers of the surrounding area. The price includes both FS9, FSX and P3D versions... Wha…

Hi all, I'm really interested in adding some sort of fly by wire / attitude hold to my flight sim. I've been trying to use easyFBW and have just been running into lots of trouble with it. I was wondering if anyone else on here had tried using it, or anything like it?

Is there Payware Airport Scenary for fs2004 with Active Gates ? THX for you help.

Hi Folks, I installed iice AI TRAFFIC2012 World V.2.00 on my FS2004. Later I came to know that it has some copyright issues. I would like to remove it from my Fs2004 but I don't see any options to remove it. I know its not an official support forum but I need help to get it uninstalled. Regards,

What would be the best payware chopper with great control on landings and over all flight ? It seems the default and freeware helos jst are so hard to control,who knows mayby its me, but I tryed all the tips and practiced alot, it seems to me that a payware helo would be much more stable, Thanks for your time. Punch649

There is a fuel trigger in FranceVFR's Nantes-Atlantique LFRS airport that I am trying to delete. ADE doesn't display the fuel trigger area in the AFCAD so I can't delete it there. I therefore added the line "ShowTriggers=1" to the FS9.CFG file so that I can see the green bounding box for the trigger when I am positioned at the airport. I have systematically removed every BGL file from the scenery folder thinking that the trigger would be in one of them somewhere but the green bounding box still shows. Does anyone know what might trigger the trigger [sorry about that!!]? It has to be somewhere but I'm going nuts here trying to find out. Does anyone have any id…

I've been looking somewhere for a good suspension and compression tutorial, as I really would like to take advantage of POSKY 777s, TDS 737, 787s and the PA A32x series but I don't seem to see the fuselage 'sink down' or 'compress' onto the gear, any thoughts?

Hello everyone! Sorry about my English. Is there any way to use the PMDG 747-400F panel (with LCD displays and ISFD) in a merge with Posky 747-400F? For PAX is no problem use the analogic gauges and CRT but for the pure cargo version, I'd like to use the cargo version panel. I've tried to merge it but when I've selected the freighter version, even with alias informing panel 747-400F, the CRT are showed and the ISFD doesn't work (see the screen). I think that there is some line that control the panels but I don't know what it is... Just for information...I've installed in the same folder the 747-400BCF GE together with PAX GE version (but with different models), when …

Hello. I'm really hoping someone might be willing to work with me on a particular issue I'd like to get resolved. For quite some time my ground textures just don't look the way the should. I know my system is not the greatest by any means (specs below) but it certainly should be good enough (I've even been told this) to get things to look much better. Basically, the ground textures do not fully render at distances where I they they should. I pretty much have to almost be on top of an area to get it to fully render. I have attached a screen shot here to show. You can kind of see the bottom red like is pretty much the break where it starts. You can see it much…

Hi I remember there was some really good free scenery for this airport but i cant find it now , does any one know if its still available? Thanks Rich

To download the sea fury you need these two files sfrel1.zip and sfrel1u.zip I can't find them in avsim or ant where else

So recently I've been trying to do the KSEA-KJFK route with the CLS 767-300ER, 3 times. 1-2 hours into the flight I get this CTD: Faulting application name: fs9.exe, version: 9.1.0.40901, time stamp: 0x4135a208 Faulting module name: G2D.DLL, version: 9.1.0.40901, time stamp: 0x4135a88e Exception code: 0xc0000005 Fault offset: 0x000987bf Faulting process id: 0x18a4 Faulting application start time: 0x01d22a53683e1e44 Faulting application path: C:\Microsoft Games\fs9.exe Faulting module path: C:\Microsoft Games\MODULES\G2D.DLL Report Id: 05eafe6b-965b-11e6-96dd-3cd92b5f0a97 Right before the CTD I was switching from spot view to Virtual cockpit, an while the VC was l…

Hello, is there an easy way to locate fuel islands for Learjet in airports using FS2004. Latest problem for me now is I cant find fuel island at New Tokyo Intl Narita RJAA airport after I taxied all over the airport in my Learjet 45 in FS2004. This is extremely annoying, please help, thanks. :mad:

Hello Guys, Turns out Im having this problem with my VOR's specifically when flying the Airbus PSS, sometimes on ground I dont get any VOR signal from any VOR. And some other times when, miraculously (dont really know how), I get signal on ground all indications from the VOR disappear around 5-10 mins into the flight. I have my VOR Database up-to-date but dont know what the deal is. Any suggestions? Thanks Guys!

Recently my old ATI Radeon HD5750 card has given up the ghost . I would appreciate any recommendations for any newer compatible card, Nvidia or AMT I want to keep my existing OS, which is :- Windows XP Intel DP%%WB inc Core i7-870 2.93Ghz 8mb 2 KVR 2GB 1333Mhz DDR3 1 PSU500 Zalman 500W 1PSU Seasonic 350W Thanks Mike

Hi all, After installation of a new scenery, I have tracking/and or magnetic deviation error. All aircrafts are unable to follow the route correctly. The problem was isolate by deactivation the scenery. My question, if this error comes from the AFCAD, does anyone know to solve it. Thank in advance Dom.

Hi All I have the excellent Lago Venice city scenery and have just installed ISD Project LIPZ alongside.(FS9) There seems to be a duplicate causeway linking the two locations....... It looks like a default object crossing over the Lago version. Can anyone advise how to get rid of the default object ? Thanks David Ireland UK

Greetings, I've been flying throughout the U.S., and Europe for the past few years, and never had a problem until about a month ago. Was flying around Germany/France/Uk when I started to get CTD's. Couldn't figure out the problem so I went through my scenery one at a time, and still couldn't solve the problem. Solved one problem with Flytampa's Athens scenery...but that's for another topic. A few months ago I bought Static Aircraft MDL Maker 2 (SAMM2), and started to make my own static aircraft. Not realizing at the time that some of the aircraft that i made were huge (larger than most terminals). I didn't think anything about it, until just recently. Some of the aircraf…

About 2 or 3 weeks ago I bought the Sikorsky S76 AI package and I have been slowly adding the paints and plans to my sim. I have noticed that some paints do not have any flightplans for them. I was wondering if anyone has or knows where I can get flightplans for the following. N786P Petroleum Helicopters VP-CYS a private S76 N15460 Nicklaus Children's Hospital N767P Cleveland Clinic SE-JUX Norrlandsflyg Ambulans VH-ZFJ Bristow Helicopters Australia VH-XHM Helicopter Resource Australia Also does anyone know if Bristow Helicopters (UK) still use the S76? I like to keep my AI as up to date as possible and I am not sure if Bristow still use the S76 or not. I asked…