The FS2004 (FS9) Forum

Just wanted to know if anyone knows of any good military airbases for fs2004 I found a couple on avsim library I'm sure there's more I also ran into some freeware military airbases that just flight had in there website. I would like to get some more but extremely difficult to find any ideas?

This is still in preliminary stages right now where one team member is impressed with what we've been discussing and doing regarding updating the look and sharpness of FS9 ground textures (mostly city textures). Anyone interested in a full payware product please email them to let them know your interest '[email protected]'. Please go look at their products to see what they've already accomplished in the past especially their 'Water' add-on which in my book is the best on the market for updating FS9's water. Here's a note I got back from one of them concerning a possible project: "Hi Les, Thanks for your kind comments, we really appreciate them! …

... just as a notice. The outcome for us FS2004ers is modest. Nevertheless, the few new airports are important ones. Regards, Harald

Just realized this today, I have these small patches of clouds that i cannot remove i change weather settings to clear skies and yet they remain i can see the other clouds changing with the weather but these patched stay there no matter what i do I also re-installed pablo diaz clouds and overwrote the original clouds texture but yet still these small clouds remain any ideas? i did remember chaging the clouds with some freeware clouds after backing up my original clouds i dint like the freeware clouds so i place the originals back in and now im getting this so i just re-installed pablo diaz hd clouds his clouds work fine but these small clouds still remain

Hi all! :rolleyes: I need to rid the file of static aircraft that double park at LIRF,the other ISD sceneries istructions are clear but the authors have omitted the file names, does anyone have the secret? ie bgl file that rids the otherwise super scenery of tatty statics. Cheers, Alcan. :wacko:

My brother , got himself a new computer with Windows 8 ( of course). After FS9 installation, , He no longer gets the floating aircraft at opening. (default A/C or add-on makes no difference). I have seen something like that with an Add-on AC. Any clues ??? Opa is no longer with us to point out. Bob [email protected] PS- After FLY NOW.. everything is oK

I moved the subject here http://forum.avsim.net/topic/413861-anyone-know-where-i-can-find-these-ground-textures-for-fs2004/

GE Pro versus what can now be done in FS9 (and this is just the start)... Images courtesy of 'Jon_aus'.

Hi, a recent thread here in the forum made me think about more VFR flying than I practice today. When I looked at my hangar, beside (mostly historic) airliners there are only either small and slow utility planes (An-14, Fieseler Storch, Wilga) or historic fighters like my Messerschmitt. I have no "classic" GA aircraft which is not as slow as an An-14 but not as fast and thirsty as a Messerschmitt or Mustang. I'd like to have a Beech Bonanza - best would be a V-tailed A35. But when it comes to models, there is a certain confusion which I should choose. - There is a freeware model by John Recker in the library. The exterior model is nice, but there is no 2D panel, …

Hi, probably easy to solve, but i can't find any solution currently...is there a way for both AI aicraft and commercial products (i.e. Overland) to seperate cabinlight from landing lights, so that, when the landing lights are ON, cabin lights go OFF and vice versa. I have already played with the alpha channel of the relevant *,_l.bmp, but either the cabin lights remain dark after landing lights are OFF or the cabinlights and landing lights are both together ON. i want to simulate a dark cabin during langing/takeoff (OFF), but ON during cruise or while on ground. thanks for helping, cheers, harald

Hello everyone,just curious, is there a (third party) widescreen panel for the PSS 777?

Hey friends, I'm getting crazy by a problem concerning the blurry ground textures. Everytime I change the camera type the scenery is fully blurry/unloaded and need to load again. Everytime!! I can change the camera within seconds and everytime its blurred. This only happens when I'm close to the ground like when approaching an airport. When on final flight level everything is fine. I'm also missing that the textures not loading farther out of my view. Please check the screens below. I tried many settings via the FS9.cfg but no solution found. Especially the blurry textures in approach making me crazy. Actual settings: TEXTURE_BANDWIDTH_MULT=900 [TERRAIN…

Good day, I am currently reinstalling FS9 on my new system and, as I do most of my flying on the African continent, I am trying to install all the aeroworx scenery for SA. I have tried everywhere google points me for the file worx25.zip but all download sites say it is not available (info on google also points to there being a worx25upd1.zip as well but this also is not available). If anyone out there can help me with a copy of these files I would be extremely grateful. In hope Mike

best if you have rxp gns530 (or 430) http://forum.avsim.net/topic/413732-aeroworx-king-air-b200-vc-repaint/#entry2717420

Hey guys, does anyone have Autoenvironment working ok with PMDG 747. I have installed it, and it is kind of working ok, but some issues are bothering me. The engine exhaust smoke is not visible on all engines, i.e. you can see it on the engines on the left wing or on the engines on the right wing, but never all together. Also, I am not seeing any wingtip vortices, not sure if this is weather dependent. Also I see some bugs, like the tail logo light flickering time to time, even in the day time when it is off. Any tips would be very useful, thanx.

Hi all, Just downloaded this program, as recommended by other posters on this forum, and cannot get it to work. I can download weather with it, I can read the METAR, and I can send the weather off to FS9. But, that's as far as I get. How do I get FS9 to receive the weather and display it? I have been using KOKC as my trial airport, because of the noticeably bad weather at the airport. I figure it would be easy to tell whether or not it loaded correctly. Anyway, I type in KOKC into the METAR box, but it tells me that it cannot be found. Why not? I type KOKC again into the METAR box, but this time click on Start up above. RealWX downloads a bunch of stuff and t…

I'm hoping that someone here will have tried both Active Sky Evolution and FSrealWX and is therefore in a position to comment on the relative merits/disadvantages of both. It has been pointed out in this forum that MS is apparently no longer updating its real weather servers, and this seems to be the case. I cannot really blame MS for this, much as I might like to, since both FS2004 and even FSX both reached end-of-life status some time ago and no doubt it was costing MS money to keep their own weather servers constantly updated with real weather. However, this situation produces a quandary for those of us using one sim or the other, who are far from ready to give the…

I get 100% CTD (screen goes black then the FS9 restart or exit box appears) within 15-20nm of KPDX when using the amazing FZ02 KPDX scenery. I've run ScanAFD to see if a duplicate AFCAD is causing the issue but there is no duplicate AFCAD. I'm assuming when using ScanAFD and the duplicate box is checked, that single AFCAD .bgl entries that appear are simply that--single entries....if there were in fact duplicate AFCADS they would show up as two identical entries....is that correct? I run UT USA and have installed the FZ02 UT patch--to no avail...still get CTDs. I also run FlyTampa KSEA. When FZ02 is installed, it changes some FS9/scenery/NAMW files, and renames the…

I would like to know how is Flightbeam's San Francisco scenery? I have Fly Tampa's version of KFSO which is good, but is it worth switching to the Flightbeam scenery?

Hi! I have a new problem with some specific airports with blurred textures. So, KLAX and KMIA sometimes give me blurred textures, out of nowhere. I have checked my Videocard settings, the FS9 config, etc. and , as far as I have seen, all other airports have normal, sharp images. So, what can be the problem? Is it the default aerial photos for the airports, or something else? It is very mysterious. Grateful for any help. Thanks. Hans Hermansson Sweden

Hi,I cannot fix a problem, which is getting me mad, with the Wilco / Project Airbus merge. I followed this procedure:1. Made a backup of this folder: FS2004\Aircraft\feelThere PIC A320. All news files were copied here;2. Copied into the model folder (inside the feelThere PIC A320) the model which comes with the Project Airbus v2 files: A320_200_CFM_NoVC.mdl;3. Modified the model.cfg file to link at the model file as above (2.);4. Modified the aircraft.cfg file deleting all previous entries with this new code: [indent]// feelThere A320 CFM[fltsim.0]title=Feelthere A320 CFM Airbussim=FeelThere_A320CFMsound=model=texture=EI-DTBatc_airline=AIRBUSpanel=checklists=atc_id=FGYW…

Hi, I tried to fly from DAAG to somewhere far east. The flightplan goes over creek from west to east. I got no addon airports active in that area at all! Still, as soon as I fly into the country area of creek, I get a CTD with an ntdll.dll error! I have some addon sceneries of creek, those GAP sceneries, thought one or all of them had an issue. So I deactivated them, first all and tried just one active - no matter which one I got active or if I got them all deactivated, I get this CTD! I can fly with the same airplane or any other a/c anywhere else with sooo many addon sceneries without this CTD. What is the issue about creek? na, please FS9 has no…

Just wondered if anyone who has the FSG US landclass file fsglc_us.bgl (v.1.12) installed also sees the two grey rectangles in the screenshot (co-ordinates in screenshot). When I remove fsglc_us.bgl, they go, so looks as if I shall have to ignore them. I don't fly over that part of the world all that frequently, I guess. Thanks, Martin

Hey guys (and gals) I couldn't find this question anywhere in these forums... I use the Saitek yoke and throttle and rudder peddles. During flight, the flaps will just deploy, causing an overspeed. Any idea what is causing this? Using FS9, Win 7 Thanks

Saw this for FSX and thought what's the best one for FS9. I'd have to say the QualityWings 'BAE Avro RJ' only because it's the only aircraft in FS9 where you can see shadows the aircraft is making on the ground from within the VC. Another thing once only thought possible in FSX.